Search results

This paper aims to study the issues of output reachable set estimation for the linear singular Markovian jump systems (SMJSs) with time-varying delay based on a proportional plus derivative (PD) bumpless transfer (BT) output feedback (OF) control scheme.

To begin with, a sufficient criterion is given in the form of a linear matrix inequality based on the Lyapunov stability theory. Then, a PD-BT OF controller is designed to keep all the output signs of the system are maintain within a predetermined ellipsoid. Finally, numerical and practical examples are used to demonstrate the efficiency of the approach.

Based on PD control and BT control method, an OF control strategy for the linear SMJSs with time-varying delay is proposed.

The output reachable set synthesis of linear SMJSs with time-varying delay can be solved by using the proposed approach. Besides, to obtain more general results, the restrictive assumptions of some parameters are removed. Furthermore, a sufficiently small ellipsoid can be obtained by the design scheme adopted in this paper, which reduces the conservatism of the existing results.

Considering the unmeasurable states of the systems and the previewed reference signal, a novel fuzzy observer-based preview controller, which is a mixed controller of the fuzzy observer-based controller, fuzzy integrator and preview controller, is considered to address the tracking control problem.

The authors employ an augmentation technique to construct an augmented error system for uncertain T-S fuzzy discrete-time systems with time-varying uncertainties. Additionally, the authors obtain the corresponding linear matrix inequality (LMI) conditions for designing the preview controller.

This paper discusses the preview tracking problem for nonlinear systems. First, considering the unmeasurable states of the systems and the previewed reference signal, a novel fuzzy observer-based preview controller, which is a mixed controller of the fuzzy observer-based controller, fuzzy integrator, and preview controller, is considered to address the tracking control problem. Then, using the fuzzy Lyapunov functional with the linear matrix inequality (LMI) technique, new sufficient conditions for the asymptotic stability of the augmented system are derived by applying the LMI technique. The preview controller and fuzzy observer can be designed in one step. Finally, a numerical example is used to illustrate the effectiveness of the results.

An augmented error system is successfully constructed by the state augmentation approach. A novel preview controller is designed to address the tracking control problem. The preview controller and fuzzy observer can be designed in one step.

This paper aims to propose a new linear parameter varying (LPV) controller for the robot tracking control problem. Using the identification of the robot dynamics in different work space points about modeling trajectory based on the least square of error algorithm, an LPV model for the robotic arm is extracted.

Parameter set mapping based on parameter component analysis results in a reduced polytopic LPV model that reduces the complexity of the implementation. An approximation of the required torque is computed based on the reduced LPV models. The state-feedback gain of each zone is computed by solving some linear matrix inequalities (LMIs) to sufficiently decrease the time derivative of a Lyapunov function. A novel smoothing method is used for the proposed controller to switch properly in the borders of the zones.

The polytopic set of the resulting gains creates the smooth switching polytopic LPV (SS-LPV) controller which is applied to the trajectory tracking problem of the six-degree-of-freedom PUMA 560 robotic arm. A sufficient condition ensures that the proposed controller stabilizes the polytopic LPV system against the torque estimation error.

Smoothing of the switching LPV controller is performed by defining some tolerances and creating some quasi-zones in the borders of the main zones leading to the compressed main zones. The proposed torque estimation is not a model-based technique; so the model variation and other disturbances cannot destroy the performance of the suggested controller. The proposed control scheme does not have any considerable computational load, because the control gains are obtained offline by solving some LMIs, and the torque computation is done online by a simple polytopic-based equation.

In this paper, a new SS-LPV controller is addressed for the trajectory tracking problem of robotic arms. Robot workspace is zoned into some main zones in such a way that the number of models in each zone is almost equal. Data obtained from the modeling trajectory is used to design the state-feedback control gain.

This paper aims to propose the automatic carrier landing system with the fault-tolerant ability for carrier-based aircraft in the presence of deck motion, external airwake disturbance and actuator fault, which consists of the reference trajectory generation module and flight control module.

The longitudinal and lateral basic controllers are designed based on the optimal preview control (OPC), which can ensure favorable tracking performance and anti-disturbance ability of system. Furthermore, based on the OPC, the robust fault-tolerant preview control scheme is proposed to attenuate the impact of actuator fault on system, which ensures the safe landing of carrier-based aircraft in case of actuator failure.

Both the Lyapunov method and simulations prove that the tracking errors can converge to zero and system states can be asymptotically stable both in normal and fault operations.

The fault-tolerant control strategy is introduced into preview control to deal with actuator fault, which combines feedforward control based on future previewable information and feedback control based on current information to improve the system performance.

The purpose of this article is to treat the nonlinear optimal control problem in EV traction systems which are based on 5-phase induction motors. Five-phase permanent magnet synchronous motors and five-phase asynchronous induction motors (IMs) are among the types of multiphase motors one can consider for the traction system of electric vehicles (EVs). By distributing the required power in a large number of phases, the power load of each individual phase is reduced. The cumulative rates of power in multiphase machines can be raised without stressing the connected converters. Multiphase motors are also fault tolerant because such machines remain functional even if failures affect certain phases.

A novel nonlinear optimal control approach has been developed for five-phase IMs. The dynamic model of the five-phase IM undergoes approximate linearization using Taylor series expansion and the computation of the associated Jacobian matrices. The linearization takes place at each sampling instance. For the linearized model of the motor, an H-infinity feedback controller is designed. This controller achieves the solution of the optimal control problem under model uncertainty and disturbances.

To select the feedback gains of the nonlinear optimal (H-infinity) controller, an algebraic Riccati equation has to be solved repetitively at each time-step of the control method. The global stability properties of the control loop are demonstrated through Lyapunov analysis. Under moderate conditions, the global asymptotic stability properties of the control scheme are proven. The proposed nonlinear optimal control method achieves fast and accurate tracking of reference setpoints under moderate variations of the control inputs.

Comparing to other nonlinear control methods that one could have considered for five-phase IMs, the presented nonlinear optimal (H-infinity) control approach avoids complicated state-space model transformations, is of proven global stability and its use does not require the model of the motor to be brought into a specific state-space form. The nonlinear optimal control method has clear implementation stages and moderate computational effort.

In the transportation sector, there is progressive transition to EVs. The use of five-phase IMs in EVs exhibits specific advantages, by achieving a more balanced distribution of power in the multiple phases of the motor and by providing fault tolerance. The study’s nonlinear optimal control method for five-phase IMs enables high performance for such motors and their efficient use in the traction system of EVs.

Nonlinear optimal control for five-phase IMs supports the deployment of their use in EVs. Therefore, it contributes to the net-zero objective that aims at eliminating the emission of harmful exhaust gases coming from human activities. Most known manufacturers of vehicles have shifted to the production of all-electric cars. The study’s findings can optimize the traction system of EVs thus also contributing to the growth of the EV industry.

The proposed nonlinear optimal control method is novel comparing to past attempts for solving the optimal control problem for nonlinear dynamical systems. It uses a novel approach for selecting the linearization points and a new Riccati equation for computing the feedback gains of the controller. The nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations.

The purpose of this paper is to investigate the fault estimation issue of nonlinear dynamical systems via distributed sensor networks. Furthermore, based on the communication topology of sensor networks, the nonfragile design strategy considering the gain fluctuation is also adopted for distributed fault estimators.

By means of intensive dynamical model transformation, sufficient conditions with disturbance attenuation performance are established to design desired fault estimator gains with the help of convex optimization.

A novel distributed fault estimation framework for a class of nonlinear dynamical systems is established over a set of distributed sensor networks, where sampled data of sensor nodes via local information exchanges can be used for more efficiency.

The proposed distributed fault estimator gain fluctuations are taken into account for the nonfragile strategy, such that the distributed fault estimators are more applicable for practical sensor networks implementations. In addition, an illustrative example with simulation results are provided to validate the effectiveness and applicableness of the developed distributed fault estimation technique.

The paper aims to study the constraint solutions of the periodic coupled operator matrix equations by the biconjugate residual algorithm. The new algorithm can solve a lot of constraint solutions including Hamiltonian solutions and symmetric solutions, as special cases. At the end of this paper, the new algorithm is applied to the pole assignment problem.

When the studied periodic coupled operator matrix equations are consistent, it is proved that constraint solutions can converge to exact solutions. It is demonstrated that the solutions of the equations can be obtained by the new algorithm with any arbitrary initial matrices without rounding error in a finite number of iterative steps. In addition, the least norm-constrained solutions can also be calculated by selecting any initial matrices when the equations of the periodic coupled operator matrix are inconsistent.

Numerical examples show that compared with some existing algorithms, the proposed method has higher convergence efficiency because less data are used in each iteration and the data is sufficient to complete an update. It not only has the best convergence accuracy but also requires the least running time for iteration, which greatly saves memory space.

Compared with previous algorithms, the main feature of this algorithm is that it can synthesize these equations together to get a coupled operator matrix equation. Although the equation of this paper contains multiple submatrix equations, the algorithm in this paper only needs to use the information of one submatrix equation in the equation of this paper in each iteration so that different constraint solutions of different (coupled) matrix equations can be studied for this class of equations. However, previous articles need to iterate on a specific constraint solution of a matrix equation separately.

This research aims to present a novel cooperative control architecture designed specifically for roads with variations in height and curvature. The primary objective is to enhance the longitudinal and lateral tracking accuracy of the vehicle.

In addressing the challenges posed by time-varying road information and vehicle dynamics parameters, a combination of model predictive control (MPC) and active disturbance rejection control (ADRC) is employed in this study. A coupled controller based on the authors’ model was developed by utilizing the capabilities of MPC and ADRC. Emphasis is placed on the ramifications of road undulations and changes in curvature concerning control effectiveness. Recognizing these factors as disturbances, measures are taken to offset their influences within the system. Load transfer due to variations in road parameters has been considered and integrated into the design of the authors’ synergistic architecture.

The framework's efficacy is validated through hardware-in-the-loop simulation. Experimental results show that the integrated controller is more robust than conventional MPC and PID controllers. Consequently, the integrated controller improves the vehicle's driving stability and safety.

The proposed coupled control strategy notably enhances vehicle stability and reduces slip concerns. A tailored model is introduced integrating a control strategy based on MPC and ADRC which takes into account vertical and longitudinal force variations and allowing it to effectively cope with complex scenarios and multifaceted constraints problems.

This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.

A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.

The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.

The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.

This paper aims to contribute to the current debate between the mainstream and the non-mainstream literature on the effect of the growth of finance on the level of income inequality, for which the empirical evidence has also been providing mixed results.

We estimate a linear model and a non-linear model by employing a panel autoregressive distributed lag approach and relying on the dynamic fixed-effects estimator because of the existence of variables that are stationary in levels and stationary in the first differences.

Our findings confirm that finance, economic growth, educational attainment and degree of trade openness have a positive long-term effect on the level of income inequality in the European Union countries, whilst government spending has a negative impact in the short term.

Our findings imply that policy makers should rethink the functioning of the financial system in order to restore a supportive relationship between finance and income inequality and adopt public policies that are more in favour of the poor in order to constrain the growth of income inequality in the European Union countries.

To the best of our knowledge, this is the first paper that, simultaneously, focuses on the European Union countries, assesses the nexus between finance and income inequality, uses three different variables as proxies for the level of income inequality (the Gini coefficient, the top 1% income share and the top 10% income share), measures the variables that are proxies for the level of income inequality in terms of pre-tax and pre-transfer values and as post-tax and post-transfer values, takes into account four different variables as proxies for the role of finance (credit, credit-to-deposit ratio, liquid liabilities and stock market capitalisation) and identifies the long-term and short-term determinants of income inequality.