Search results

This study analyzed Korea's relations table through network analysis. In particular, among the centralities, eigenvector centrality, PageRank centrality and degree were used. The author studied which network characteristics affected the value-added rate.

A network analysis method was used.

It is the inward relationship that affects the value-added ratio of Korea's industries and the outward relationship has less influence. In particular, the inward relationship not only acts as a cost but also has an effect on the rate of added value recently.

Since the three years of 2010, 2015 and 2019 are the target, the data are somewhat insufficient to generalize.

As for the value-added ratio of an industry, input is more important than output (sales). Therefore, where the input is received is very important.

It is possible to increase the understanding of the determinants of the value-added rate of Korean industries.

(1) It was clarified which side is inward or outward in determining the industry in Korea. (2) The relationship between PageRank, eigenvector centrality and degree was analyzed in Korean cases. (3) Input is a cost and acts to increase added value.

The purpose of this paper is to settle the methodological debate on the decomposition of value added in gross exports, proposing a standard, exposing the drawbacks of the alternatives and quantifying the differences.

This paper systematizes the analytical framework and assesses and quantifies the various methodologies and its main differences.

The decomposition method of Borin and Mancini (2023), using a source-based approach and an exporting country perspective, should be considered as the standard for decomposing the value added in gross exports. This study finds that alternative approaches and perspectives are methodologically inferior, and that tailored perspectives do not provide an increase in accuracy that compensates their drawbacks.

This paper’s contribution is fourfold: it rejects the alleged equivalence between approaches and perspectives, defending the superiority of a particular method, approach and perspective; it gives quantitative examples of the differences between them; it proves that the drawbacks of tailored perspectives do not compensate their alleged accuracy (as they do not result in big quantitative differences with the standard perspective); and it argues that no valid standard decomposition can forego the calculation of value added exported, which requires the expression of exports in terms of final demand.

This study aims to examine the effect of structural transformation on poverty alleviation in Sub-Saharan Africa (SSA) countries with a higher share of services as a percentage of gross domestic product (GDP). The study specifically focuses on the value-added share as a percentage of GDP in the agricultural, manufacturing, industrial, and service sectors using time series data from 1988 to 2019.

The study utilizes the autoregressive distributive lag (ARDL) bound test framework for estimation, based on the conclusions drawn from the augmented Dickey-Fuller and Phillips–Perron unit root tests, which provide evidence of a mixed order of integration.

The result reveals that agriculture value-added (AVA), manufacturing value-added (MVA), industrial value-added (IVA), and services value-added (SVA) have a positive and significant impact on poverty alleviation in both the short and long run. However, the agriculture sector is found to be more effective in reducing poverty compared to the other sectors examined in this study. Additionally, this study challenges the notion that SSA countries have undergone an immature structural transformation. Instead, it reveals a pattern of stagnant structural transformation, as indicated by the lack of growth in the industrial and manufacturing value-added shares of GDP.

To enhance productivity and reduce poverty, SSA economies should adopt a development strategy that prioritizes heavy manufacturing and industrial sectors, leading to a transition from the agricultural to the secondary and tertiary sectors.

The study contributes to the emerging literature on structural transformation by investigating which sector is more efficient in reducing poverty in SSA countries, using the value-added share as a percentage of GDP for agricultural, manufacturing, industrial, and service sectors. The study also aims to determine if SSA countries have experienced immature structural transformation due to the growing share in the service sector.

The main goal of this paper is to examine the evolution of Latin American productive integration in terms of the regional value added incorporated in intra-regional exports of Argentina, Brazil, Chile, Colombia, Mexico and Peru. In addition, the study traces the trade and productive integration trajectories for each of these countries from 1995 to 2015.

Based on the use of OECD’s global ICIO input-output tables, this paper applies the methodological framework by Wang et al. (2018) for the analysis of trade flows at the bilateral level, which allows breaking down the value of gross exports of each sector-country, depending on the origin of the value added contained in exports, as well as their use.

The estimates show very low shares of value added from regional partners in the intra-regional exports of the countries studied. Conversely, the weight of the value added incorporated in these exports by countries outside the region has increased in tandem with China’s expanding involvement in Latin America. This development, along with the downward trend in domestic value added incorporated in exports, indicates a lack of a regional integration process of any depth.

This article addresses an economic problem of conventional importance from a global value chain perspective using a novel methodology based on the use of global input–output tables.

The purpose of this paper is to provide an early assessment of India’s South-South cooperation for trade and technology (SSTT) with East Africa, focusing on Ethiopia, Rwanda, Kenya, Uganda and Tanzania. It aims to analyse the role of SSTT in providing support to targeted sectors.

The paper examines SSTT, focusing on India and East Africa over a specific period (2000–2016) of its emergence, and extends the public sponsorship literature in international business (IB) to better understand the relationship between SSTT and value addition – applying to a particular case study of SSTT interventions in spices.

The paper highlights SSTT as a pathway to support value addition in global value chains (GVCs). Trade between India and East African countries has grown, with three developments over the period of analysis in particular: shifting trade patterns, growing share of intermediate goods trade and differences in GVC insertion. However, East African exports are largely of lower value. Capacity building to support processing capability and thriving markets can encourage greater value addition. Preliminary findings suggest early gains at the margins, as SSTT interventions have been focusing on capacity boosting with buffering and bridging mechanisms for increased volume of trade. Moving up the value chain however requires that specific value-enhancing activities continue to be targeted, building on regional capacities. Our high-level case study for spices suggests that activities are starting to have a positive effect; however, more focus is needed to specifically target value creation before export and in particular higher levels of processing.

While findings are preliminary, policy implications emerge to guide SSTT interventions. There is capacity for building higher value-added supply chains as is evident among East African countries that trade with each other – future SSTT programmes could tap into this and help build capacity in these higher-value value chains. Future SSTT programmes can take a comprehensive approach by aiming at interventions at key points of the value chain, and especially at points that facilitate higher value addition than initial processing. An example is that Ethiopia and Rwanda are likely to benefit from an expanded spice industry, but the next phase should be towards building processing for value-addition components of the value chain, such as through trade policies, incentivising exporters to add value to items before export. From a development perspective, more analysis needs to be done on the value chain itself – for instance, trade facilitation measures to help processers engage in value chains and to access investments for increasing value add activities. (iv), Future research should examine more closely the development impacts of SSTT, namely, the connection between increased trade, local job creation and sustained innovation, as it is these tangible benefits that will help countries in the Global South realise the benefits of increased trade.

The paper underlines how the SSTT approach can contribute to the critical IB and GVCs literature using a theoretical grounded approach from public sponsorship theory, and with a unique lens of development cooperation between countries in the global south and its emerging impact on development outcomes in these countries.

In this paper, we evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

We employ a Dynamic GTAP-VA Model to quantitatively evaluate the economic repercussions of the “Chip Act” on the Chinese electronic industries' GVC participation from 2023 to 2040.

The findings depict a discernible contraction in China’s electronic sector by 2040, marked by a −2.95% change in output, a −3.50% alteration in exports and a 0.45% increment in imports. Concurrently, the U.S., EU and certain Asian economies exhibit expansions within the electronic sector, indicating a GVC realignment. The “Chip Act” implementation precipitates a significant divergence in GVC participation across different countries and industries, notably impacting the electronics sector.

Through a meticulous temporal analysis, this manuscript unveils the nuanced economic shifts within the GVC, substantially bridging the empirical void in existing literature. This narrative accentuates the profound implications of policy regulations on global trade dynamics, contributing to the discourse on international economic policy and industry evolution.

We evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

The interaction between policy regulations and global value chain (GVC) dynamics is pivotal in understanding the contemporary global trade framework, especially within technology-driven sectors. The US “Chips Act” represents a significant regulatory milestone with potential ramifications on the Chinese electronic industries' engagement in the GVC.

The significance of this paper is that it quantifies for the first time the impact of the US Chip Act on the GVC participation index of East Asian countries in the context of US-China decoupling. With careful consideration of strategic aspects, this paper substantially fills the empirical gap in the existing literature by presenting subtle economic changes within GVCs, highlighting the profound implications of policy regulation on global trade dynamics.

In Italy, worker cooperatives (WCs), whose workers hold major control rights over collectively-owned assets, are the leading vehicle for the promotion and development of employee ownership. Worker cooperatives are present in all regions and in most economic sectors, employing about 506,000 workers and generating a turnover of about €22 bn. Despite their history and diffusion, the high prevalence of WCs in Italy is under-researched and -thematised and requires new research.

The paper leverages unpublished primary and secondary data from Centro Studi Legacoop databank, the Aida-Bureau Van Dijk databank and the Cooperative Registry of the Ministry of Economic Development (CRMED) to explain the spread of WCs in Italy.

This paper reveals descriptive statistics of WCs and investigates their distribution across economic sectors and regions, their economic and financial performance and gives an overview of the relevant legislation. The paper indicates that older small- and medium-sized cooperatives located in central and north-eastern Italy perform best economically. However, in recent years, an increasing number of young cooperatives has emerged in South Italy thanks to favourable legislation, cooperative finance and the diffusion of cooperative know-how. Limitations to such results are reported in the conclusions.

The paper sheds light on past and recent development trends of WCs in Italy, highlights their growth in South Italy and revitalises the debate on the drivers, structures and rationales of employee-owned enterprises in Italy. Findings generate implications for research and practice. Given the tendency of WCs to better protect jobs than investor-owned enterprises, the spread of these enterprises may help workers find better and more stable jobs, counter-cyclically mitigating the dangerous effects of macro- and meso-economic fluctuations and instability.

Corporate real estate management (CREM) is complex due to an increasing number of real estate (RE) added values and the tensions between them. RE managers are faced with trade-offs: to choose a higher performance for one added value at the cost of another. CREM research mainly deals with trade-offs in a hypothetical sense, without looking at the characteristics of the RE portfolio nor the specific context in which trade-offs are made. The purpose of this paper is to further develop the concept of real estate value (REV) optimisation with regard to tensions between decreasing CO₂ emissions and supporting user activities.

Mixed method study. REV optimisation between user activities and energy efficiency for police stations in the Netherlands built between 2000 and 2020 is analysed. This is complemented by interviews with an RE manager and senior user of police stations and analysis of policy documents.

The characteristics of the police station portfolio indicate no correlation between user activities and energy efficiency for the case studied. This is complemented by interviews, from which it becomes clear that there was in fact little tension between supporting user activities and energy efficiency. The performances of these two different added values were optimised separately.

This study combines different scales (building and portfolio level) with different types of data: portfolio analysis, document analysis and interviews. This creates a comprehensive image of whether and how the Netherlands police optimised the two RE values.

This study investigates the effect of managerial ability on labor productivity by analyzing various methods in the firm-year panel data of listed firms in South Korea from 2002 to 2019. Managerial ability was analyzed using the measurement method of Demerjian et al. (2012), while labor productivity was analyzed using value-added and sales. The authors find that managerial ability has a positive effect on labor productivity. In other words, the productivity of employees improves with the appointment of a manager with higher abilities. The study’s findings suggest that firms should consider managerial ability as a means of improving labor productivity.

The purpose of this paper is to determine if there is a link between corporate shareholder value creation and economic growth. The first objective of this paper is to determine which specific shareholder value measurement best explains shareholder value creation for a particular industry. The next objective of the study is to establish, for each of nine different categories of firms examined, a set of value drivers that are unique and significant in expressing shareholder value for that particular category of firms. Lastly, the relationship between shareholder value creation and economic growth is tested.

To quantify and measure value creation, the paper investigates the various value creation measurements that are being applied. The next step is to ascertain whether various industries have different value creation measures that best explain value creation for the respective industries. Then, the value drivers of these specific value creation measures can be determined and their relationship with economic growth tested.

The results of this study indicate that each industry does have a specific shareholder value creation measurement that best explains shareholder value creation for that industry; for example, for five of the nine categories (industries) that were analyzed, market value added was found to be the best shareholder value creation measurement, but for capital-intensive firms and manufacturing firms, the Qratio is the best measure, while for the food and beverage industry, the market to book ratio was found to be a better measure of shareholder value creation than other measures tested. It was further found that an increase in corporate shareholder value creation is to the detriment of economic growth.

The contribution of the present study is its determination of a unique shareholder value creation measurement for particular industries. In addition, a specific set of variables per industry that create shareholder value is identified. Lastly, the important link between shareholder value creation and economic growth is exposed.