Search results
1 – 10 of 142Maheshwaran Gopalakrishnan, Anders Skoogh, Antti Salonen and Martin Asp
The purpose of this paper is to increase productivity through smart maintenance planning by including productivity as one of the objectives of the maintenance organization…
Abstract
Purpose
The purpose of this paper is to increase productivity through smart maintenance planning by including productivity as one of the objectives of the maintenance organization. Therefore, the goals of the paper are to investigate existing machine criticality assessment and identify components of the criticality assessment tool to increase productivity.
Design/methodology/approach
An embedded multiple case study research design was adopted in this paper. Six different cases were chosen from six different production sites operated by three multi-national manufacturing companies. Data collection was carried out in the form of interviews, focus groups and archival records. More than one source of data was collected in each of the cases. The cases included different production layouts such as machining, assembly and foundry, which ensured data variety.
Findings
The main finding of the paper is a deeper understanding of how manufacturing companies assess machine criticality and plan maintenance activities. The empirical findings showed that there is a lack of trust regarding existing criticality assessment tools. As a result, necessary changes within the maintenance organizations in order to increase productivity were identified. These are technological advancements, i.e. a dynamic and data-driven approach and organizational changes, i.e. approaching with a systems perspective when performing maintenance prioritization.
Originality/value
Machine criticality assessment studies are rare, especially empirical research. The originality of this paper lies in the empirical research conducted on smart maintenance planning for productivity improvement. In addition, identifying the components for machine criticality assessment is equally important for research and industries to efficient planning of maintenance activities.
Details
Keywords
People who experience mental illness often demonstrate limited help-seeking behaviours. There is evidence to suggest that media content can influence negative attitudes towards…
Abstract
Purpose
People who experience mental illness often demonstrate limited help-seeking behaviours. There is evidence to suggest that media content can influence negative attitudes towards mental illness; less is known about how media impacts help-seeking behaviours. The purpose of this study is to identify if media plays a role in people’s decisions to seek help for their mental health.
Design/methodology/approach
The databases Academic Search Complete, CINAHL Plus with Full Text, MEDLINE, APA PsycArticles, APA PsycInfo, Social Sciences Full Text [H.W. Wilson] and Soc Index were systemically searched for papers in the English language that investigated the link between media and help-seeking for mental illness.
Findings
Sixteen studies met eligibility criteria. There was some evidence to suggest that various forms of media – including video and online resources – can positively influence help-seeking for mental health. Print media had some limited effect on help-seeking behaviours but was weaker in comparison to other forms of media. There was no evidence to suggest that media discourages people from seeking help.
Originality/value
This review identified that, given the heterogeneity of the included papers, and the limited evidence available, there is a need for more focused research to determine how media impacts mental health-related help-seeking behaviours.
Details
Keywords
Islamic banks are obliged to carry out transactions that only comply with Islamic commercial laws. Malaysia has been championing the Sharīʿah-based banking system, and so…
Abstract
Purpose
Islamic banks are obliged to carry out transactions that only comply with Islamic commercial laws. Malaysia has been championing the Sharīʿah-based banking system, and so, continuous improvement on the compliance level of the institutions offering Islamic financial services is key to its global recognition in this industry. One of the issues that can affect deposit products is existence of a sale contract and loan facility in one transaction. Famous prophetic tradition prohibits this. Hence, this paper aims to examine the linkage between bayʿwa salaf (combination between a sale contract and loan in one transaction) and deposits accounts in Malaysia.
Design/methodology/approach
The subject matter of this paper is one that is researchable within library-based research. It is on this premise the research used the non-empirical qualitative research methodology. It used inductive method of analysis of both Islamic and policy documents on Islamic banking in Malaysia. Literature from Islamic jurisprudence, websites of some of the Islamic banks in Malaysia and relevant resolutions from the Shariah Advisory Council of Central Bank of Malaysia were consulted.
Findings
Based on the methodology mentioned above, the researchers arrived at the following findings: that, although there is no juristic disagreement about the prohibition of bayʿwa salaf, disagreement, however, occurs in results of some contracts. The most notable area of agreement on the existence of bayʿwa salaf is when there is express stipulation of sale or rendering of service and express or implied stipulation of loan alongside of the sale or service rendering. In an organized reversed tawarruq, the use of these deposits by the banks is regarded as loan from the depositors to the banks, who will soon put the money into sale that will generate profit to be divided between the banks and their depositors. However, this study finds that this is not bayʿwa salaf prohibited by the prophetic tradition.
Originality/value
The originality of this topic is proven by the new banking regulation regime of Malaysia, which compels Islamic banks to guarantee all deposits under them. As Islamic banks carry out their banking activities through trading, there is need to conduct a research such as this. This is to examine whether Islamic banks’ unilateral use of depositors’ funds in non-investment accounts which is translated, constructively, as loan from the depositors to Islamic banks amounts to bayʿwa salaf before the future tawarruq. Here there is loan and sale, which is the tawarruq. Hence, the need to do this research.
Details
Keywords
Agnieszka Chmielewska, Bartlomiej Adam Wysocki, Elżbieta Gadalińska, Eric MacDonald, Bogusława Adamczyk-Cieślak, David Dean and Wojciech Świeszkowski
The purpose of this paper is to investigate the effect of remelting each layer on the homogeneity of nickel-titanium (NiTi) parts fabricated from elemental nickel and titanium…
Abstract
Purpose
The purpose of this paper is to investigate the effect of remelting each layer on the homogeneity of nickel-titanium (NiTi) parts fabricated from elemental nickel and titanium powders using laser powder bed fusion (LPBF). In addition, the influence of manufacturing parameters and different melting strategies, including multiple cycles of remelting, on printability and macro defects, such as pore and crack formation, have been investigated.
Design/methodology/approach
An LPBF process was used to manufacture NiTi alloy from elementally blended powders and was evaluated with the use of a remelting scanning strategy to improve the homogeneity of fabricated specimens. Furthermore, both single melt and up to two remeltings were used.
Findings
The results indicate that remelting can be beneficial for density improvement as well as chemical and phase composition homogenization. Backscattered electron mode in scanning electron microscope showed a reduction in the presence of unmixed Ni and Ti elemental powders in response to increasing the number of remelts. The microhardness values of NiTi parts for the different numbers of melts studied were similar and ranged from 487 to 495 HV. Nevertheless, it was observed that measurement error decreases as the number of remelts increases, suggesting an increase in chemical and phase composition homogeneity. However, X-ray diffraction analysis revealed the presence of multiple phases regardless of the number of melt runs.
Originality/value
For the first time, to the best of the authors’ knowledge, elementally blended NiTi powders were fabricated via LPBF using remelting scanning strategies.
Details
Keywords
Jianing Wang, Jieshi Chen, Zhiyuan Zhang, Peilei Zhang, Zhishui Yu and Shuye Zhang
The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as…
Abstract
Purpose
The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment. Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni3Sn4 phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn4 phase. After the reflow process and thermal aging of different joints, the growth behavior of interfacial layer was different due to the different mechanism of element diffusion of the two substrates. The PC Ni substrate mainly provided Ni atoms through grain boundary diffusion. The Ni3Sn4 phase of the Sn0.05Ni/PC Ni joint was finer, and the diffusion flux of Sn and Ni elements increased, so the Ni3Sn4 layer of this joint was the thickest. The SC Ni substrate mainly provided Ni atoms through the lattice diffusion. The Sn0.1Ni/SC Ni joint increases the number of Ni atoms at the interface due to the doping of 0.1Ni (wt.%) elements, so the joint had the thickest NiSn4 layer.
Design/methodology/approach
The effects of doping minor Ni on the microstructure evolution of an Sn-xNi (x = 0, 0.05 and 0.1 Wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment was investigated in this study.
Findings
Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni3Sn4 phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn4 phase. After the reflow process and thermal aging of different joints, the growth behavior of the interfacial layer was different due to the different mechanisms of element diffusion of the two substrates.
Originality/value
In this study, the effect of doping Ni on the growth and formation mechanism of IMCs of the Sn-xNi/Ni (single-crystal) solder joints (x = 0, 0.05 and 0.1 Wt.%) was investigated.
Details
Keywords
Kiranmai Uppuluri and Dorota Szwagierczak
The purpose of this work was to characterize NiMn2O4 spinel-based thermistor powder, to use it in screen printing technology to fabricate temperature sensors, to study their…
Abstract
Purpose
The purpose of this work was to characterize NiMn2O4 spinel-based thermistor powder, to use it in screen printing technology to fabricate temperature sensors, to study their performance for different sintering temperatures of thermistor layer, with and without insulative cover, as well as to investigate stability of the fabricated thermistors and their applicability in water quality monitoring.
Design/methodology/approach
After the characterization of starting NiMn2O4 spinel-based thermistor powder, it was converted to thick film paste which was screen printed on alumina substrate. Thermistor layers were sintered at four different sintering temperatures: 980°C, 1050°C, 1150°C and 1290°C. An interdigitated pattern of Ag-Pd conductive layer was used to reduce the resistance. Temperature-resistance characteristics were investigated in air and water, with and without insulative cover atop the thermistor layer. Stability of the fabricated thermistors after aging at 120°C for 300 h was also examined.
Findings
Thick film NiMn2O4 spinel thermistors, prepared by screen printing and sintering in the temperature range 980°C–1290°C, exhibited good negative temperature coefficient (NTC) characteristics in the temperature range −30°C to 145°C, including high temperature coefficient of resistance, good stability and applicability in water.
Originality/value
This study explores the range of sintering temperature that can be applied for NiMn2O4 thermistor thick films without compromising on the temperature sensing performance in air and water, as well as stability of the thermistors after aging at elevated temperatures.
Details
Keywords
This study attempts to identify and analyze the pragmatic functions of religious expressions, that is, invocations that include the name of Allah (God), in naturally occurring…
Abstract
Purpose
This study attempts to identify and analyze the pragmatic functions of religious expressions, that is, invocations that include the name of Allah (God), in naturally occurring social interactions in Najdi Arabic, which is spoken in Central Saudi Arabia.
Design/methodology/approach
Drawing on the speech act theory and politeness model, an analysis of the data illustrates that religious expressions, in addition to their prototypical religious meanings and uses in everyday interactions, are employed to communicate a wide range of pragmatic functions.
Findings
These include signaling the end of a conversation, persuading, mitigating and hedging, showing agreement and approval, reinforcing emphasis, expressing emotions, seeking protection from the evil eye, conveying skepticism and ambiguity, expressing humor and sarcasm, and showing respect and honor. The embedded multifunctional dimension of religious expressions in the present data is interpreted as serving as a politeness marker with which speakers promote both positive politeness (by showing solidarity, claiming common grounds, and building rapport) and negative politeness (by reducing imposition and emphasizing personal autonomy).
Originality/value
This study further highlights the interplay between religion, culture, and language use in Najdi Arabic.
Details
Keywords
Prateek Kalia, Meenu Singla and Robin Kaushal
This study is the maiden attempt to understand the effect of specific human resource practices (HRPs) on employee retention (ER) with the mediation of job satisfaction (JS) and…
Abstract
Purpose
This study is the maiden attempt to understand the effect of specific human resource practices (HRPs) on employee retention (ER) with the mediation of job satisfaction (JS) and moderation of work experience (WE) and job hopping (JH) in the context of the textile industry.
Design/methodology/approach
This study adopted a quantitative methodology and applied quota sampling to gather data from employees (n = 365) of leading textile companies in India. The conceptual model and hypotheses were tested with the help of Partial Least Squares-Structural Equation Modelling (PLS-SEM).
Findings
The findings of a path analysis revealed that compensation and performance appraisal (CPA) have the highest impact on JS followed by employee work participation (EWP). On the other hand, EWP had the highest impact on ER followed by grievance handling (GRH). The study revealed that JS significantly mediates between HRPs like CPA and ER. During Multi-group analysis (MGA) it was found that the importance of EWP and health and safety (HAS) was more in employee groups with higher WE, but it was the opposite in the case of CPA. In the case of JH behavior, the study observed that EWP leads to JS in loyal employees. Similarly, JS led to ER, and the effect was more pronounced for loyal employees.
Originality/value
In the context of the Indian textile industry, this work is the first attempt to comprehend how HRPs affect ER. Secondly, it confirmed that JS is not a guaranteed mediator between HRPs and ER, it could act as an insignificant, partial or full mediator. Additionally, this study establishes the moderating effects of WE and JH in the model through multigroup analysis.
Details
Keywords
This paper introduces a new mathematical model for analyzing the economic benefits of incorporating the fourth party logistics (4PL), which is a contractor (i.e. agent) for the…
Abstract
This paper introduces a new mathematical model for analyzing the economic benefits of incorporating the fourth party logistics (4PL), which is a contractor (i.e. agent) for the supply chain coordination and construction based on the division of community and the outsourcing development. Based on the physical theory and the wave-particle duality, a supply chain is the special organization whose characteristic has wave-particle duality. The mathematical model enriches the connotation of 4PL and it broadens the thought for 4PL development. Secondly, the proposed mathematical model predicated on transaction costs, is supported by Transaction Cost Theory (TCT) and acts as the theoretical analysis tool of 4PL for coordinating 3-party generic supply chain. Through the model, some trendy conclusions can be drawn to provide theoretical support for 4PL’s practices. Finally, a case illustrates our conclusions.
Details
Keywords
Barbara Dziurdzia, Maciej Sobolewski, Janusz Mikołajek and Sebastian Wroński
This paper aims to investigate voiding phenomena in solder joints under thermal pads of light-emitting diodes (LEDs) assembled in mass production environment by reflow soldering…
Abstract
Purpose
This paper aims to investigate voiding phenomena in solder joints under thermal pads of light-emitting diodes (LEDs) assembled in mass production environment by reflow soldering by using seven low-voiding lead-free solder pastes.
Design/methodology/approach
The solder pastes investigated are of SAC305 type, Innolot type or they are especially formulated by the manufacturers on the base of (SnAgCu) alloys with addition of some alloying elements such as Bi, In, Sb and Ti to provide low-void contents. The SnPb solder paste – OM5100 – was used as a benchmark. The solder paste coverage of LED solder pads was chosen as a measure of void contents in solder joints because of common usage of this parameter in industry practice.
Findings
It was found that the highest coverage and, related to it, the least void contents are in solder joints formed with the pastes LMPA-Q and REL61, which are characterized by the coverage of mean value 93.13% [standard deviation (SD) = 2.72%] and 92.93% (SD = 2.77%), respectively. The void diameters reach the mean value equal to 0.061 mm (SD = 0.044 mm) for LMPA-Q and 0.074 mm (SD = 0.052 mm) for REL61. The results are presented in the form of histograms, plot boxes and X-ray images. Some selected solder joints were observed with 3D computer tomography.
Originality/value
The statistical analyses are carried out on the basis of 2D X-ray images with using Origin software. They enable to compare features of various solder pastes recommended by manufacturers as low voiding. The results might be useful for solder paste manufacturers or electronic manufacturing services.
Details