Modified macroporous adsorption resin (LX1180) used to adsorb flavonoid

Abstract

Purpose

The purpose of this paper is to prepare a higher chloromethylation degree (CD) modified macroporous adsorption resin (MAR, LX1180-Cl) and further study their adsorption performance.

Design/methodology/approach

CD and crosslinking degree were evaluated using stationary potential step and rotating-disk method, the adsorption performance of LX1180-Cl and LX1180 for flavonoids were studied using the UV-VIS spectrophotometry.

Findings

This research realized high CD (9.6 mass %) on high crosslinking MAR, LX1180. In tandem, the adsorption performance of them to flavonoids finds that the matching degree of polarity (presented with CD) and size were the critical factor to adsorption. It was also found that the reaction time had reduced to 24 h with the addition of iron particles into the zinc chloride (ZnCl₂) catalyst.

Research limitations/implications

The study on reaction mechanism and the function principle of hybrid catalyst were speculated, but not the rigid experimental result.

Practical implications

This contribution can provide a rule for the separation and purification of natural products with the aim to improve food additive removal or isolation and purification of flavonoids used for healthcare applications.

Originality/value

This contribution provided a novel way to obtain high degree of CD with high crosslinking MAR, CD of commercially available MAR was improved by 2.5 times to 9.6 percent under crosslinking degree at 58.2 percent, compared with reported CD value (ca. 4.2 percent under crosslinking degree at 20.0 percent), which will be useful in the following further systematically research about the adsorption and separation selectivity of MAR. Besides, the primitive chosen principle of MAR according to the substrate was also presented. Moreover, the chloromethylation mechanism, although speculative, was briefly presented, which will stimulate the related study.

Citation

Chen, Z., Long, J., Kang, L., Du, X., Di, D. and Liu, J. (2013), "Modified macroporous adsorption resin (LX1180) used to adsorb flavonoid", Pigment & Resin Technology, Vol. 42 No. 6, pp. 374-387. https://doi.org/10.1108/PRT-04-2012-0030