Pigment & Resin Technology
Issue(s) available: 429 – From Volume: 1 Issue: 1, to Volume: 51 Issue: 4
Strapline:
The international journal of colorants, polymers and colour applications
Volume 50
Volume 47
Volume 42
Volume 21
Volume 20
Volume 19
Volume 18
Volume 17
Volume 16
Volume 15
Volume 14
Volume 13
Volume 12
Volume 11
Volume 10
Volume 9
Volume 8
Volume 7
Volume 6
Volume 5
Volume 4
Volume 3
Volume 2
Differentiation of multilayered automotive coatings with Fourier transform infrared spectroscopy, Raman spectroscopy and scanning electron microscope/energy dispersive Xray spectrometer
Lan Chu, Chao Guo, Qing Zhang, Qing Wang, Yiwen Ge, Mingyang Hao, Jungang LvThis study aims to using Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy and scanning electron microscope/energy dispersive Xray spectrometer to…
Preparing and applying a poly(styrene-co-maleic anhydride)-g-polyetheramine hyperdispersant
Dongjun Lv, Xiaolei Zhang, Guocheng Gao, Jing Tang, Zilong Zhang, Yihui Liu, Ran Wang, LeiFang LiuThe purpose of this study was the preparation of a poly(styrene-co-maleic anhydride)-g-polyetheramine (SMA-g-PEA) hyperdispersant that reduces the viscosity of the system…
The role of chelating agent on the structure and up-conversion property of NaLuF4:Yb,Tm as security ink phosphor
Saeed Bastani, Mojtaba Jalili, Mehdi Ghahari, Parand BanihashemThis study aims to investigate the effect of trisodium nitrilotriacetic acid (NTA) on the physical and luminescence emission properties of NaLuF4:Yb, Tm Upconversion (UC…
Study on preparing of diallyl maleate modified acrylic resin
Zheqing Gong, Shusen Cao, Zhibin Cai, Lijun ChenThere are three double bonds in the chemical structure of diallyl maleate. The purpose of this study is that the acrylate is modified with diallyl maleic anhydride to make…
Comparison of life cycle assessment for laminating and glazing processes based on simapro
Qingbin Cui, Fenjuan ShaoBoth glazing and laminating play a certain role in finishing and protecting the surface of printed matter. This study makes a comparative analysis of the two through life…
Research and application of K/S value in stain identification
Qingbin Cui, Fenjuan ShaoThe intelligent identification of stains can quickly and accurately identify stains. At present, stains are identified subjectively by appearance, color, taste, feel…
Synthesis of nano-porous ZNO as pigment for white silicone thermal control coating and investigation of structure, optical and thermal properties
Vahid Heydari, Zaker Bahreini, Majid AbdoussThe harsh environment of space, especially radiation of direct solar rays, can potentially raise the temperature of the spacecraft to harmful levels. Thermal control…
Effects of different colorants on service performance for colored asphalt pavement in cold regions
Xinxin Fu, Yanjun Chen, Minggang Sun, Tengjiang YuThe service performance for colored asphalt pavement is inevitably affected by the addition of different colorants, especially the challenge of low temperature environment…
The effect of mordanting method on the absorption behavior of natural dyes
Ali Shams Nateri, Ehsan DehnaviThis work aims to study the effect of mordanting method as pre-mordanting (on-chrome), meta-mordanting (meta-chrome) and post-mordanting (after-chrome) on wool dyeing with…
Preparation and characterization of self-crosslinking acrylic emulsion with different fluorocarbon chain lengths
Wanting Zhao, Tantan Shao, Xiaolong Chen, Shusen Cao, Lijun ChenFluorine materials have received the keen attention of many researchers because of their water repellency and low surface free energy. The purpose of this paper is to…
Investigation of self-cleaning attributes of denim fabric modified with naturally synthesized ZnO nanoparticles
Fareha Asim, Farhana NaeemThe textile sector is moving towards new technologies, where the application of nanotechnology is offering fabrics with multifunctional properties making fabric odourless…
Yarn porosity and its relationship with the dyeing behavior
Sheraz Hussain Siddique Hussain Yousfani, Salma Farooq, Quratulain Mohtashim, Hugh GongPorosity is one of the most important properties of the textile substrate. It can influence the comfort of a garment by affecting its breathability and thermal…
Eco-friendly single bath dyeing of wool yarns with extracted cochineal dye: optimization and additives effect
Hooman Imani, Kamaladin Gharanjig, Zahra AhmadiThe purpose of this study is simultaneous dyeing and mordanting of wool yarns with extracted cochineal dye and aluminum sulfate to the reduction of consuming energy, water…
Sustainable exploration of coffee extracts (coffea arabica l.) for dyeing of microwave-treated bio-mordanted cotton fabric
Shahid Adeel, Fazal-Ur Rehman, Ayesha Amin, Nimra Amin, Fatima Batool, Atya Hassan, Meral OzomayThis study aims to observe the coloring efficacy of coffee-based natural brown colorant for cotton dyeing under microwave (MW) treatment.
The anti-corrosion performance of reinforcement behaviour of silica from different sources in bio-based paints
Mustafa EkenThe aim of this study is to investigate the usability of horsetail, sunflower stalk, wheat stalk and corn stalk ashes as additives in paints and their performance against…
Development of portable colorimeter for on-site determination of water quality in aquaculture
Kesavan Devarayan, Madhan Kathavarayan, Anand Theivasigamani, Monikandon Sukumaran, Sabariswaran KandasamyThis study aims to describe the development of a battery-operated portable colorimeter for on-site determination of water quality in aquaculture.
Preparation of new modified antimicrobial alkyd resin based on benzo[b]thiophene derivative as source of polyol for surface coating applications
H. Abd El-Wahab, Raafat A. El-EisawyThis paper aims to prepare new modified alkyd resins and use it as an antimicrobial binder for surface coating applications.
Optical properties of polymerization N-(3-methoxypropyl) acrylamide polymer gel dosimeters for radiotherapy
Khalid Rabaeh, Molham EyadehThe purpose of this paper is to evaluate the dosimetric properties of N-(3-methoxypropyl) acrylamide (NMPA) polymer gel dosimeter using UV-vis spectrophotometry as a…
Color difference of yarn-dyed fabrics woven from warp and weft yarns in different color depths
Xiaoyan Wang, Jiaxin Zhang, Yang Jiang, Jinmei Du, Dagang Miao, Changhai XuThis paper aims to determine the most practically applicable color-difference formula for yarn-dyed fabrics woven from warp and weft yarns in different color depths and to…
Investigation and optimisation of process parameters for the green chemistry colouration using banana bio-resources waste
Quratulain Mohtashim, Fareha Asim, Salma FarooqThe application of synthetic dyestuffs in the dyeing and printing industries has been criticized because of the introduction of contaminants into the environment. With…
Optimization of ink consumption in screen printing within color difference limits
Lutfi Özdemir, Mustafa Batuhan Kurt, Ahmet Akgül, Mehmet Oktav, Mujgan Nayci DumanThe purpose of this paper is to optimize the key parameters (mesh count, paper type and ink type) in screen printing, which are affecting the printed ink volume. The…
New out-performing structured pigments for anticorrosive practical applications
Nivin M. Ahmed, Mostafa G. Mohamed, Walaa M. Abd El-GawadLong time ago, multistructured materials showed great interest being considered as the bridge between bulk and atomic materials. Core-shell particles are kind of composite…
Restore lost properties of solidified leaves with hydroxypropyl cellulose
Walid Shaaban Abdelrasoul MohamedThis paper aims to find a suitable solution to treat the solidification paper by using hydroxypropyl cellulose (HPC) to improve the mechanical, physical and chemical…
Effective adsorption of U(VI) from aqueous solution using polystyrene grafted with zeolite
O.A. Elhefnawy, A.A. ElabdThe purpose of this study is to prepare Polystyrene grafted with Zeolite Y (Zeosty) for Uranyl ion [U(VI)] adsorption from aqueous solution. The adsorption mechanism has…
Drying and adhesive properties of novel surface coatings derived from peanut skin extract and cashew nutshell liquid
Sampson Kofi Kyei, William Iheanyi Eke, Godfred Darko, Onyewuchi AkarantaThis study aims to synthesize pigment and resin from agro-wastes and use them in the formulation of eco-friendly surface coatings.
Ecofriendly automobile base coats derived from castor oil: evaluation of nano silica reinforcements on the performance characteristics of coatings
Debasmita Mohanty, Krishnan Kanny, Smita Mohanty, Sanjay K. NayakThe purpose of this study is to reduce the application of petroleum in automobile paint industry by replacing it with bio-based castor oil along with nano fillers to…
Synthesis of eco-friendly cobalt doped willemite blue pigment from white sand for multi-applications in coatings and inks
Walaa M. Abd El-Gawad, Wael Mohamed AbdelmaksoudThis study aims to investigate the possibility of synthesizing cobalt doped willemite ceramic blue pigment by using Egyptian white sand as environmental and economical raw…
The removal of methylene blue and maxilon blue dyes using a polyvinyl alcohol/poly(acrylic acid-co-acrylamide) composite hydrogel from water
Hanieh ShakiIn this study, polyvinyl alcohol (PVA)/poly[acrylic acid (AAc)-co-acrylamide (AM)] composite hydrogel was prepared by radical copolymerization in the presence of Fe3+…
Studies on swelling behavior, mechanical and thermal properties of ternary rubber blend composites in the presence of compatibilizers
Amir A. Abdelsalam, Salwa H. El-Sabbagh, Wael S. Mohamed, Mohsen A. KhozamiThis study aims to investigate the swelling behavior, mechanical and thermal properties of ternary rubber blend composites prepared by melt blending based on carbon black…
Enhancing the properties of petrified paper with cellulose nanocrystal
Walid Shaaban Abdelrasoul MohamedThe purpose of this study is to find an applicable solution for the consolidation of petrified paper after disassembling it to complete other stages of treatment.
Synthesis, characterization, spectroscopic properties and computational studies of some new azo dyes derived from 5-chloro-8-hydroxy quinoline
Fatemeh Ashouri Mirsadeghi, Enayatollah Moradi Rufchahi, Saeid ZarrabiThe purpose of this study, 3-aminopyridine, 8-aminoquinoline and some new synthesized 2-aminobenzothiazoles were diazotized with nitrosyl sulfuric acid and subsequently…
Low viscosity & high-performance resorcinol epoxy acrylate preparation & application in stereolithography 3D printing
Prashil Desai, R.N. JagtapThere is a rising demand for high-performance 3D printed objects that have established potential applications in the sector of dental, automotive, electronics, aerospace…
Synthesis, spectroscopic and physico-chemical studies of novel pigments derived from Lithol Rubine
Wael Mohamed Abdelmaksoud, Mohamed Aboaly, Said Teleb, Adel Mohy-Eldin Gabr, Mostafa Abdellah SayedThe pursuit of manufacturing new inks with low financial cost is an urgent economic demand. Thus, the purpose of this paper is to synthesize some new pigments derived from…
Turmeric as eco-friendly corrosion inhibitor for electron beam-curable steel coating in 3.5% sodium chloride solution
I.M. Mousaa, M.A. ElhadyThis study aims is to evaluate the environmentally friendly turmeric as a corrosion inhibitor for mild steel in a simulated seawater corrosion medium such as a 3.5% NaCl…
Study on the dyeing process of fast-growing fir veneer with reactive dyes
Xuemei Guan, Wenfeng Li, Jingyi HuangThe purpose of this paper is to improve the dyeing effect of fast-growing fir wood dyed with reactive dyes.
Highly sensitive electrochemical sensor based on novel Ag Nps/Ppti films for detection of hydrazine
Jing Xu, Xiaoju Long, Jiaojing Zhang, Song WuA novel semiconducting macromolecule-polyperylene tetraamide (PPTI) was first synthesized with a simple method using 3, 4, 9, 10-perylene tetracarboxylic acid (PTCA) and…
Effect of microcrystalline cellulose on mechanical property and shape memory property of water-borne epoxy
Xinyu Chen, Wenjun Wang, Shuaijie Chen, Yubing DongThis paper aims to study the effect of microcrystalline cellulose (MCC) on the mechanical property and shape memory property of water-borne epoxy (WEP).
Creating antique effects on silk fabric
Longfei Sun, Yingchun Le, Junling Wu, Long LinThe purpose of this study is to reduce the gloss of the surface of silk fabrics, by treating the fabrics with tea and matting agent, to imitate the aging and retro effects…
A new strategy to integrate silver nanowires with waterborne coating to improve their antimicrobial and antiviral properties
Mohamed H. Sharaf, Adham M. Nagiub, Salem S. Salem, Mohamed H. Kalaba, Esmail M. El Fakharany, Hamada Abd El-WahabThis study aims to focus on the preparation and characterization of the silver nanowire (AgNWs), as well as their application as antimicrobial and antivirus activities…
A comparative study of corrosion resistance of epoxy-based coating incorporated chitosan, silica and hybrid compound of chitosan/silica on mild steel
Iling Aema Wonnie Ma, Sachin Sharma Ashok Kumar, Ramesh Kasi, Ammar Shafaamri, Ramesh SubramaniamThis study aims to propose that the corrosion resistance of the neat epoxy coating can be further enhanced by incorporating reinforcing agents.
Nano-dispersible azo pigments from lignin: a new synthetic approach and epoxy-polyamine composite coating
Rahul Patil, Lina Jadhav, Nikhil Borane, Satyendra Mishra, Vikas PatilHere, diazo coupling reaction was imparted on chemically inert lignin isolated from natural resources. Activated lignin was coupled with the diazotised aniline…
Eco-friendly polymer composite films based on waste polyvinyl chloride/sunflower seed cake for antimicrobial and antistatic applications
Mona Saied, Abeer Reffaee, Shimaa Hamieda, Salwa L. Abd- El- Messieh, Emad S. ShafikThis study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in…
Evaluation of wood gap fillers composed of microcrystalline cellulose, paper pulp, and glass microballoons
Ebtehal Mahmoud Montaser, Nesrin M.N. El Hadidi, Enas Abo Elenen AminThis paper aims to provide a deeper understanding of using filling materials that are used to fill gaps in wooden objects, and their response to changes in the surrounding…
Fabrication of poly(AA)-chitosan nanoparticles graft copolymer via microwave irradiation system for enhancing water solubility and antimicrobial properties
Khaled MostafaThis paper aims to study previously prepared and fully characterized chitosan nanoparticles (CNPs) as a starting substrate and microwave initiation technique for grafting…
Development and characterization of biodegradable film from marine red seaweed (Kappaphycus alvarezii)
Veeramani Rajasekar, Paramasivan Karthickumar, Ashokkumar Hozen Richhie Rose, Nagarajan Manimmehalai, Dharmaraj SubhasriThe purpose of this study was carried out to explore the potential use of carrageenan extracted from marine red seaweed (Kappaphycus alvarezii) collected from Munaikadu…
Mechanical, barrier, thermal, surface hydrophobicity, optical and antibacterial properties of PBAT biopolymer after addition of natural plasticizer and silica nanoparticles
T. Thendral ThiyakuThe purpose of this study is to develop active package films using clove essential oil (CEO) and biodegradable polybutylene adipate terephthalate (PBAT) with varying…
Facile preparation of robust superhydrophobic coating on concrete surface through “all-covalent” strategy
Pingping Hou, HongYan Huang, Yong Wang, Jun Zhang, Dewen SunThe purpose of this study is to prepare a robust superhydrophobic coating on concrete substrate with remarkable chemical and mechanical durability through “all-covalent” strategy.
Preparation and characterization of strontium aluminate/urea-formaldehyde composite: a solution for oxidation-induced darkening problem
Gözde Koçak, Seçil Çelik ErbaşThis study aims to produce homogenously prepared polymer composites by adding two different strontium aluminate derivatives (Sr4Al14O25 and SrAl2O4) to urea-formaldehyde…
ZnO-based nanocomposites for removal of lead (Pb2+) from water/wastewater: a review
Maryam Khashij, Mohammad Hossein Salmani, Arash Dalvand, Hossien Fallahzadeh, Fatemeh Haghirosadat, Mehdi MokhtariThis paper aims to investigation of processes for Pb2+ elimination from water/wastewater as a significant public health issue in many parts of world. The removal of Pb2+…
Evaluation of optical properties of fluorescent nanofiber using image-processing technique
Ali Shams Nateri, Laleh AsadiThe purpose of this study is evaluate the optical properties of polyacrylonitrile (PAN) nanofibers containing fluorescent agents such as fluorescent dye and carbon quantum…
Environmentally benign rare earth pigments: effect of calcium dopant and tuning of bandgaps for different color hues
Divya V., Divya Jayan, Asoka KumarAs there is a strong inducement to develop new colored inorganic materials to substitute the current industrial pigments that are based on toxic metals hazardous to health…
Hibiscus sabdariffa L. calyces’ and argon DBD plasma: potential eco-friendly cleaners for fire-damaged silver gelatin prints
Laila M. Elattar, Sawsan S. Darwish, Usama M. Rashed, Maha Ahmed Ali, Shaimaa M. EldeighdyeThis paper aims at examining the potentiality of using Hibiscus sabdariffa L. calyces’ (Hs) aqueous extract to remove soot stains from the surface of fire-damaged silver…
Optimization and analysis of dry sliding wear process parameters on cellulose reinforced ABS polymer composite material
Ponsuriyaprakash S., Udhayakumar P., Pandiyarajan R.This study aims to the optimization using three factors and three-level parameters (sliding speed [rpm], sliding distance [m/s] and load [N]) of design matrix were adapted…
Effect of addition of compatibilizer on mechanical, thermal and thermo-mechanical behavior of a polymer blend (PBT/ PBT(G)/ PTT) composite
Sundaram R.K., Senthil Kumaran S., Edwin Samson P.This study aims to reduce the interfacial tension by increasing the better adhesion between different immiscible polymers phases and also to evaluate the mechanical…
Effects of green technology plasma pre-treatment on the wettability and ink adhesion of paper
Samed Ayhan Özsoy, Safiye Meriç Acıkel, Cem AydemirThe surface energy of the printing material can be increased to desired levels with different chemicals or methods. However, the important thing is that the surface…
The prediction of optimal conditions for the surface grafting of β-cyclodextrin onto silk fabrics by an artificial neural network (ANN)
Abolfazl Zare, Pedram PayvandyThe purpose of this study is the chemical grafting of β-Cyclodextrin (β-CD) onto silk fabrics by the use of butane tetracarboxylic acid (BTCA) as a crosslinking agent and…
A fabrication and characterization of luffa/PANI/PEO biocomposite nanofibers by means of electrospinning
Gözde Konuk Ege, Hüseyin Yüce, Özge Akay, Hasbi Öner, Garip GençThis paper aims to address the production of biocomposite nanofibers using luffa natural fibers and polyaniline conductive polymer/polyethylene oxides (PANI/PEO).
Synthesis of metal organic framework modified with carboxylated attapulgite and adsorption properties for organic dye
Fanhua Wu, Yuyu Zhang, Tao Li, Yongfeng Liu, Yi Liu, Zhiang Yuan, Rongjun QuThe purpose of this study was to prepare carboxylated attapulgite (APT-COOH) and then be used as one of the ligands to prepare metal organic framework (MOF) hybrid…
Evaluation of mechanical and thermal properties of fabricated Sansevieria and Kaans fiber/Egg shell powder reinforced with polyester matrices
Rajkumar Devapiriam, Karthik S., Santhy K.The purpose of this study is to fabricate and compare the mechanical and thermal properties of Sansevieria and Kaans fiber reinforced polyester matrices composites.
Dispersive interactions in the adsorption and corrosion inhibition effects of Alstonia boonei on mild steel in acidic environments
Anthony Ikechukwu Obike, Wilfred Emori, Hitler Louis, Godwin Ifeanyi Ogbuehi, Paul Chukwuleke Okonkwo, Victoria Mfon BasseyThe purpose of this paper is to study the adsorption properties of a proven traditional medicine of West Africa origin, Alstonia boonei with an attempt to evaluate its…
Preparation and selectivity evaluation of grafted temperature-responsive imprinted composite polyvinylidene fluoride resin membranes for selective adsorption of ReO4−
Jun Zhang, Xiaojian Ou, Lin Li, Qianqian Chen, Zifan Zhang, Ting Huo, Xiaoyu Lin, Fangfang Niu, Shengyuan Zhao, Fang We, Hui Li, Chunli Liu, Zhenbin Chen, Sujun Lu, Peng Zhang, Jinian ZhuA novel grafted temperature-responsive ReO4− Imprinted composite membranes (Re-ICMs) was successfully prepared by using polyvinylidene fluoride (PVDF) resin membranes as…
Fire-retardant and smoke-suppressant rigid polyurethane foam composites
Ahmet Akar, Berrin Değirmenci, Nesrin KökenThe purpose of this paper is the production of fire retardant and smoke suppressant rigid polyurethane foam (RPUF) with lower toxicity by using several fire-retardant combinations.
Rendering viscose fabric dye-able with anionic dyes using plasma treatment technique and chitosan nanoparticles as an eco-friendly approach
Khaled MostafaThis paper aims at studying the oxygen plasma treatment and the previously prepared and fully characterized chitosan nanoparticles (CNPs) as a green and eco-friendly…
Selective route for enhancing liquid crystal-based hydroxylpropyl cellulose by esterification
Altaf A.H. Basta, Vivian Lotfy, Jehane Micky, Aya M. SalemThis paper aims to study the effect of hydrolysis route of hydroxypropyl cellulose (HPC) on its esterification performance as liquid crystal material. The assessment was…
Design and synthesis of thermosensitive block resin as carrier for immobilization of penicillin G acylase
Hongyi Tu, Donglei Liu, Zhenbin Chen, Chunli LiuUsing a reversible addition fragmentation chain transfer reaction, a series of resins were prepared by using N, N-diethyl acrylamide (DEA), poly (ß-hydroxyethyl…
Physical and mechanical investigation for polyionic liquid/poly(vinyl alcohol) blends
Nehad N. Rozik, Emad Saad Shafik, Salwa L. Abd-El-MessiehThis study aims to polymerize of 1-butyl-3-vinylimidazolium bromide (PIL). PIL was embedded into PVA with a different content ratio by casting method. This research also…
Analysis of the color properties of papers subjected to different recycling numbers in electrophotographic (toner) printing
Ufuk YılmazIn this present study, electrophotographic printing is made on papers which are subjected to different recycling numbers, and this paper aims to examine the colour changes…
Effect of compatibilisers on the cure characteristics and mechanical properties of ternary rubber blend composites
Amir A. Abdelsalam, Salwa H. El-Sabbagh, Wael S. Mohamed, Jian Li, Lihua Wang, Hanafi Ismail, Ahmed Abdelmoneim, Mohsen A. KhozamiThis paper aims to study the effects of various compatibilisers (maleic anhydride (MAH), methyl methacrylate/butyl acrylate emulsion lattice, and adhesion system (HRH)) on…
Investigation into the effect of resin finish on the functional characteristics of plain fabrics using different curing methods
Farhana Naeem, Fareha Asim, Muhammad TufailCellulosic fabric and plain weave are the most commonly used material in home textiles. The poor wrinkling, dimensional stability and pilling are some of the problems…
Optimization and characterization of surface treated Lagenaria siceraria fiber and its reinforcement effect on epoxy composites
Saravanan N., Navin Kumar B., Bharathiraja G., Pandiyarajan R.This paper aims to investigate the resultant optimal ultimate tensile strength, elongation, flexural strength and modulus, compression strength and impact strength of…
Evaluation of thermal and physical properties of PMMA/PMVEMA-ES blends as organic coating
Shameer Hisham, Hairul Anuar Tajuddin, Norazilawati Muhamad Sarih, Nur Zarith Diana Diana Zakaria, Zul Hazrin Zainal Abidin, Norhana Abdul HalimIn this work, the blends of poly(methyl methacrylate), PMMA and poly(methyl vinyl ether-alt-maleic acid monoethyl ester), PMVEMA-ES are studied as organic coatings to…
A scientific approach for evaluating extremely caked paper manuscript kept in Al-Azhar Library in Cairo
Walid Shaaban Abdelrasoul Mohamed, Mostafa Attia MohiePaper aims to determinate caking paper manuscript cause through studying of the manuscript components, bio-deterioration and physio-chemical deterioration factor. It will…
Comparison of the usage of fines and PCC pigment in handsheets
Merve EnginThis paper aims to investigate the influences of fines and precipitated calcium carbonate (PCC) pigment and their contents on the fundamental properties of handsheets and…
Impact of some mineral-based nanoparticles versus carbon nanoallotropes on properties of liquid crystal hydroxypropyl cellulose nanocomposite films
Altaf H. Basta, Vivian F. Lotfy, Aya M. SalemThis study aims to motivate the application of some low-cost minerals in synthesizing nanoparticles as effective additives on the performance of liquid crystal (LC…
Optimisation of the process of dyeing cotton fabric with natural dyes from jackfruit wood by immersion without heating
Ainur Rosyida, Suranto Suranto, Mohammad Masykuri, Margono MargonoThis paper aims to examine the recipe for and standard methods of dyeing cotton fabric with natural dyes from jackfruit wood extract. The dyeing of the fabric was…
New coating formulation based on synthesized benzodiazepine derivatives as double function additives for industrial application
Nashwa Mostafa Saleh, Maha Mohammed Elsawy, Hamada Abd El-Wahab, Salem Salah Salem, Nour El-Din Abd El-SattarThe purpose of this study is to develop a new protective coating formulation for industrial use, using benzodiazepine derivatives as double function additives.
Formulation and characterization of pigmented inkjet inks containing aminopropyl/vinyl/silsesquioxane for jet printing onto polyester fabrics
Osama A. Hakeim, Samah A. Rashed, Hanan DiabThe present research aims to manage the formulations of pigment-based inks containing aminopropyl/vinyl/silsesquioxane (APSV) as a pigment binding agent for inkjet…
Waterborne nano-emulsions of polyvinyl acetate-polyurethane coatings containing different types of vinyl monomers: synthesis and characterization
Walid S. Abdel-Wakil, Tarek M. Salama, Elbadawy A. Kamoun, Farag Abd El Hai Ahmed, Wassem Hassan, Yaser A. El-Badry, Alaa FahmyThis paper aims to synthesize new terpolymers by the emulsion polymerization technique composed of acrylamide-based polyurethane monomers (TPM and MPM) with different…
Evaluation of the condition of a Mamluk-illuminated paper manuscript at Al-Azhar Library, Egypt
Gomaa Abdel-Maksoud, Mostafa Abdel-Hamied, Ahmed A.M. AbdelhafezThis paper aims to present the components' characterization and condition assessment of an important deteriorated Mamluk-illuminated paper manuscript housed in Al-Azhar…
Characterization and evaluation of novel sustainable polymers derived from renewable rosin
Amal A. Soliman, Noha A. Alian, Maha Mohammed Elsawy, Nihal O. ShakerThis study aims to prepare low-cost biomaterials from renewable natural resources (rosin).
Novel study of using chitosan in gamma dose monitoring applications
Mohamad Bekhit, Essam Fahim, Asmaa SobhyThe purpose of this paper is to fall light on the possibility of using the biopolymer chitosan in gamma dose monitoring.
Medium optimization and downstream process design for the augmented yield of β-Carotene using fungi Blakeslea trispora
Umesh Luthra, Prabhakar Babu, Remya R.R., Angeline Julius, Yogesh Patel, Ramesh Jajula Veera, Ilma Majeedβ-Carotene is the most appropriate and significant precursor of vitamin A. Synthetic carotene supplements have been known to pose a threat to human health, making natural…
Damage caused by black inks to the chemical properties of archaeological papyrus – analytical study
Bataa Sayed Mohamed Mazen, Badawi Mohamed Ismail, Rushdya Rabee Ali Hassan, Mahmoud AliThe purpose of this study is to determine the nature of archaeological papyrus damage and monitoring the mechanics of damage caused by black inks to the chemical…
Preparation of metal organic framework hybridizing with poly(p-phenylene terephthalamide) fiber and adsorption properties for anionic dye
Yi Liu, Guangyao Qiu, Tao Li, Ang Yan, Yongfeng Liu, Rongjun Qu, Changmei SunTo treat water pollution, especially the contamination resulted from organic dyes has aroused significant attention around the world, this study aims to prepare the metal…
Removal of Congo red from aqueous solution in single and binary mixture systems using Argan nutshell wood
Mohammed El Khomri, Noureddine El Messaoudi, Abdellah Dbik, Safae Bentahar, Abdellah Lacherai, Zahra Goodarzvand Chegini, Amal BouichArgan nutshell wood (ANW) has been used in this study as an agricultural solid waste to remove Congo red (CR) from an aqueous solution in single and mixture binary in the…
An investigation of the tensile characteristics of printed handsheets
Merve Engin, Sinan Sönmez, Mustafa Batuhan KurtThe purpose of this paper is to investigate the influences of fibre lengths and a given range of paper grammages on the fundamental properties of unprinted and printed…
Removal of reactive orange 16 with nZVI-activated carbon/Ni: optimization by Box-Behnken design and performance prediction using artificial neural networks
Maryam Sadat Seyedi, Mahmoud Reza Sohrabi, Fereshteh Motiee, Saeid MortazavinikThe purpose of this paper is to analyze nano zero-valent iron (nZVI)-activated carbon/Nickel (nZVI-AC/Ni) by a novel method. The synthesized adsorbent was used to degrade…
Synthesis of pyrene-based materials with third-order nonlinearity optical property by click chemistry modification
Shuchen Tian, Hui Cao, Zhou Yang, Yuzhen Zhao, Wanli He, Hong GaoCurrently, conjugated nonlinear optical (NLO) materials suffer from the drawbacks of complex manufacturing process and high cost. To further study the NLO materials with…
Printability of bio-composite sheets made from paper mill and cardboard mill waste sludge
Hüseyin Yüce, Garip Genç, Sinan Sönmez, Öznur Özden, Ahmet Akgül, Burcu Nilgün ÇetinerThe purpose of this study is to reveal the usability of waste paper sludge on the production of composite materials and the printability of their surfaces were investigated.
Preparation and evaluation of antimicrobial thiadiazol azo disperse dyes as colored materials in digital transfer printing ink for printing onto polyester fabric
Ali A. Ali, Maha Mohammed Elsawy, Salem S. Salem, Ahmed A. El-Henawy, Hamada Abd El-WahabPaper aims to preparation of new acid disperse dyes based on thiadiazol derivatives and evaluation of their use as antimicrobial colorants in digital transfer-printing ink…
Fabrication of temperature-regulating functional fabric based on n-octadecane/SWCNTs composite phase change material
Wei Zhang, Jiali Weng, Shang Hao, Yuan Xie, Yonggui LiFabrics with photothermal conversion functions were developed based on the introduction of shape stable composite phase change materials (CPCMs).
The effects of coating colours on base papers
Merve Engin, Sinan Sönmez, Öznur ÖzdenThe purpose of this paper is to investigate the influences of coating colours and their contents on the fundamental properties of base papers and also evaluate these…
Utility of copper (lignin/silica/fatty acids) complex derived from rice straw as antioxidant/hardening and fluid resistant agent in nitrile-butadiene rubber composites (PART IV)
Hoda Sabry Othman, Salwa H. El-Sabbagh, Galal A. NawwarIn continuation to the previous work on copper (lignin/silica/fatty acids) (Cu-LSF) complex as a natural antioxidant/electrical conductivity agent for nitrile-butadiene…
Phthalonitrile-etherified cardanol-phenol-formaldehyde resin: synthesis, characterization and properties
Dayong Zhang, Xiaohui Liu, Xuefeng Bai, Gang Wang, Liping Rong, Ying Zhao, Xin Li, Jinhua Zhu, Changhong MiThe purpose of this study is to investigate the heat resistance and heat-resistant oxygen aging of 4-nitrophthalonitrile-etherified cardanol-phenol-formaldehyde (PPCF) to…
The effect of mineralizer addition and temperature on synthesis of malayaitepink pigment
Romina Mehrabi, Hamid Reza Rezaie, Bijan Eftekhari YektaThis study aims to the effect of NaF, Li2CO3 and H3BO3 minerals was investigated, and the best mineralizer was found to be H3BO3. Furthermore, the effect of temperature…
Novel insecticide waterborne coating based on isoxazole benzene sulfonamide derivatives as insecticide agents
M. M. Elsawy, Mohamed A. Awad, Nashwa M. Saleh, H. Abd El-WahabPaper aims to Preparation and evaluation of isoxazole benzene sulfonamide derivatives and incorporated it with waterborne household paints to develop coating compositions…
Organic-inorganic composite nanocoatings with superhydrophobicity and thermal stability
A. Syafiq, A.K. Pandey, Vengadaesvaran Balakrishnan, Syed Shahabuddin, Nasrudin Abd RahimThis paper aims to investigate the thermal stability and hydrophobicity of difference alkyl chain of silanes with silicon (Si) micro- and nanoparticles.
Study on self-cleaning performance and hydrophobicity of TiO2/silane coatings
A. Syafiq, A.K. Pandey, Vengadaesvaran Balakrishnan, Nasrudin Abd RahimThe paper aims to investigate the effect of Degussa P-25 Titanium Dioxide (TiO2) nanoparticles on hydrophobicity and self-cleaning ability as a single organic coating on…
ISSN:
0369-9420Online date, start – end:
1972Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Long Lin