Numerical solutions of the second-order dual-phase-lag equation using the explicit and implicit schemes of the finite difference method

Abstract

Purpose

The purpose of this paper is the application of the finite difference method (FDM) for numerical modeling of the microscale heat transfer processes occurring in the domain of thin metal film subjected to a laser pulse. The problem discussed is described by the different variants of the second-order dual-phase-lag equation (DPLE). The laser action is taken into account by the introduction of internal volumetric heat source to the governing equation. The capacity of the source is dependent on the geometrical co-ordinates and duration of the laser beam. The modified forms of DPLE presented in the paper, resulting from the certain substitutions introduced to the basic equation.

Design/methodology/approach

At the stage of numerical computations, the different variants of the FDM are applied. Both the explicit and implicit FDM schemes are used. The formula determining the capacity of the internal heat source suggests the formulation of the task discussed using the cylindrical co-ordinate system. The in-house programs realizing the numerical computations concern the axially-symmetrical tasks. In this paper, the metal films made of the nickel and gold are considered.

Findings

The algorithms presented make possible to analyze the heating/cooling processes occurring in the domain of metal film having a thickness Z for the different laser parameters (laser intensity, characteristic time of laser pulse and laser beam radius) and the different materials (optical penetration depth, reflectivity of irradiated surface, lag times, thermal conductivity and volumetric specific heat).

Research limitations/implications

Not for all metals, one can find information on lag times. In the literature, analytical formulas can be found to calculate these values, but they are strongly approximated. It should be pointed out that there are some limitations concerning the delay times of material considered, which assure the physical correctness of the second-order DPLE.

Originality/value

The FDM algorithm concerns the three-dimensional cylindrical domain while a large majority of the second-order DPLE numerical solutions have been obtained for the one-dimensional tasks. Both the implicit and explicit numerical schemes are proposed and the testing computations confirm the correctness and effectiveness of the algorithms presented.

Citation

Majchrzak, E. and Mochnacki, B. (2020), "Numerical solutions of the second-order dual-phase-lag equation using the explicit and implicit schemes of the finite difference method", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 30 No. 4, pp. 2099-2120. https://doi.org/10.1108/HFF-11-2018-0640