To read this content please select one of the options below:

A new compact dual band printed monopole antenna using electromagnetic band gap structures

El Amjed Hajlaoui (College of Engineering, Qassim University, Buraidah, Saudi Arabia and Faculty of Sciences, ElMANAR University, Tunis, Tunisia)

Circuit World

ISSN: 0305-6120

Article publication date: 2 May 2017

114

Abstract

Purpose

The purpose of this paper is to present a new dual-band printed monopole antenna with a partial ground with two notched bands based on electromagnetic band gap (EBG) structures. A new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed.

Design/methodology/approach

The proposed antenna consists of a pair of EBG structures using a transmission line model. The proposed antenna is designed on an FR4 substrate with a thickness of 1 mm and permittivity (er) = 4.3.

Findings

The measured results show good dual-band operations with −10 dB impedance bandwidths of 9.1 and 36.2 per cent centered at 2.45 and 6.364 GHz, respectively, which covers the wireless local area network (WLAN) operating bands.

Originality/value

A new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed.

Keywords

Citation

Hajlaoui, E.A. (2017), "A new compact dual band printed monopole antenna using electromagnetic band gap structures", Circuit World, Vol. 43 No. 2, pp. 56-62. https://doi.org/10.1108/CW-11-2016-0061

Publisher

:

Emerald Publishing Limited

Copyright © 2017, Emerald Publishing Limited

Related articles