Numerical modeling of hybrid laser welding taking into account phase change of material
ISSN: 0332-1649
Article publication date: 6 March 2017
Abstract
Purpose
This paper aims to present a three-dimensional (3D) model of hybrid laser welding of a steel plate. Before welding, the plate is pre- and/or post-heated by induction to avoid mechanical stresses in material due to high gradients of temperature. Welding itself is realized by laser beam without welding rod. The model takes into account existence of both solid and liquid phases in the weld.
Design/methodology/approach
Presented is the complete mathematical model of the above heat treatment process, taking into account all relevant nonlinearities (saturation curve of the processed steel material and temperature dependences of its physical parameters). Its numerical solution is realized by the finite element method. Some important results are compared with experimental data.
Findings
In comparison with the former model developed by the authors that did not take into account the phase change, the results are more realistic and exhibit a better accordance with measurements. On the other hand, they strongly depend on sufficiently accurate knowledge of material parameters in both solid and liquid levels (that represent the input data).
Research limitations/implications
The quality of calculated results strongly depends on the material properties and their temperature dependencies. In case of alloys (whose chemical composition may vary in some range), such data are often unavailable and must be estimated on the basis of experiments. Another quantity that has to be calibrated is the time dependence of power delivered by the laser beam, which is due to the production of a plasma cloud above the exposed spot.
Practical implications
The presented model and methodology of its solution may represent a basis for design of the complete technology of laser welding with induction pre-heating and/or post-heating.
Originality/value
Fully 3D model of hybrid laser welding (supplemented with pre- and/or post-heating by magnetic induction) taking into account both solid and liquid phases of welded metal and influence of the plasma cloud is presented.
Keywords
Acknowledgements
This research has been supported by the Ministry of Education, Youth and Sports of the Czech Republic under the RICE New Technologies and Concepts for Smart Industrial Systems, project No. LO1607 and project TACR No. TA03010354.
Citation
Doležel, I., Kotlan, V., Hamar, R. and Pánek, D. (2017), "Numerical modeling of hybrid laser welding taking into account phase change of material", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 36 No. 2, pp. 417-426. https://doi.org/10.1108/COMPEL-05-2016-0225
Publisher
:Emerald Publishing Limited
Copyright © 2017, Emerald Publishing Limited