COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Issue(s) available: 196 – From Volume: 1 Issue: 1, to Volume: 42 Issue: 2

Volume 42
-
Issue 2 2023
Volume 41
Volume 39
Volume 38
Volume 37
Volume 36
Volume 35
Volume 34
-
Issue 4 2015
Volume 33
-
Issue 6 2014 Selected papers of the 17th International Symposium on Theoretical Electrical Engineering - ISTET 2013 (Pilsen, Czech Republic)
Volume 32
Volume 31
Volume 30
-
Issue 4 2011 Selected papers from the 15th International Symposium on Theoretical Electrical Engineering, ISTET09
-
Issue 3 2011 Selected papers from the 21st Symposium on Electromagnetic Phenomena in Nonlinear Circuits
-
Issue 2 2011
-
Issue 1 2011 Selected papers from the 4th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER09
Volume 29
-
Issue 5 2010 Selected papers from the 18th International Conference on Electrical Machines, ICEM 2008
-
Issue 4 2010 Selected Papers from the 14th International Symposium on Electromagnetic Fields in Electrical Engineering ISEF2009
-
Issue 3 2010
-
Issue 2 2010 Selected papers from the International Conference on Wireless Systems Computation, Assembling and Compatibility CAC 2008
-
Issue 1 2010 Selected papers from the 13th Power Electronics and Motion Control Conference, EPEPEMC 2008
Volume 28
-
Issue 4 2009 Selected papers from the 13th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering
-
Issue 3 2009 Selected Papers from XX Symposium in Electromagnetic Phenomena in Nonlinear Circuits EPNC 2008
-
Issue 2 2009
-
Issue 1 2009 Selected papers from the 14th International Symposium on Theoretical Electrical Engineering ISTET 2007
Volume 27
-
Issue 6 2008 Special Section on the Third Edition of the Italian Workshop on Finite Element Method as Applied to Electrical and Information Engineering
-
Issue 5 2008 Papers from the International Conference on Power Electrical Systems, organized within the Fourth IEEE Multiconference on Systems, Signals and Devices
-
Issue 3 2008
-
Issue 2 2008 SPECIAL SECTION Selected Papers from the International Conference on Heating by Electromagnetic Sources
-
Issue 1 2008 Selected papers from the 7th International Symposium on Electric and Magnetic Fields, June 2006
Volume 26
-
Issue 5 2007
-
Issue 4 2007 Selected papers from the 19th Symposium on Electromagnetic Phenomena in Nonlinear Circuits 2006
-
Issue 3 2007 Selected papers from the 12th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, September 2006
-
Issue 2 2007 Selected papers from the 9th Workshop on Optimization and Inverse Problems in Electromagnetism, Sorrento 2006
-
Issue 1 2007 Selected papers from the 3rd International Conference on Systems, Signals and Devices, March 2005
Volume 25
Design and dimensioning of a test bench for investigating the relationship between critical temperature and axial mechanical stress of GdBaCuO tape conductors
Johannes Liebrich, Christian KreischerSuperconductors offer several advantages compared with conventional conductors. However, it is not clear at this stage whether these types of conductors provide the same…
An augmented multiphase rail launcher with a modular design: theoretical considerations and development
Florian Zellmer, Markus Löffler, Markus Schneider, Christian KreischerThe purpose of this paper is to investigate a novel approach toward electromagnetic launch.
Comparison of population-based algorithms for parameter identification for induction machine modeling
Moritz Benninger, Marcus Liebschner, Christian KreischerMonitoring and diagnosis of fault cases for squirrel cage induction motors can be implemented using the multiple coupled circuit model. However, the identification of the…
Lagrange multiplier optimization method for high current–low frequency inductor design
Hugo dos Santos Marques, Maria Beatriz BorgesThis paper aims to overcome the lack of methodologies for optimizing the volume of bulky low-frequency inductors that the authors came across with when working on the…
Heuristic design and modelling of modified interleaved boost converter for E-mobility control
Suresh Sampath, Zahira Rahiman, Shafeeque Ahmed Kalavai, Bharanigha Veerasamy, Saad MekhilefThis study aims to present a modified interleaved boost converter (MIBC) topology for improving the reliability and efficiency of power electronic systems.
Optimal design of a yoke-less axial flux switching PM motor based on multi-objective PSO
Javad Rahmani Fard, Saadat Jamali Arand, Siroos HemmatiIn this paper, an improved multiobjective particle swarm optimization (PSO) algorithm is proposed to optimize a three-phase, 12-slot, 19-pole, yokeless axial-field…
Parameter identification for MTPA control based on a nonlinear d-q dynamic IPMSM model
Mitja Garmut, Simon Steentjes, Martin PetrunSmall highly saturated interior permanent magnet- synchronous machines (IPMSMs) show a very nonlinear behaviour. Such machines are mostly controlled with a closed-loop…
Sensorless DTC-SVM applied to an induction motor controlled by a three-level inverter using SMSFO
Salma Jnayah, Adel KhedherThe direct torque control (DTC) of induction motor (IM) drive is featured by high ripples in the electromagnetic torque and stator flux profiles because they are…
Efficient high-resolution electric and magnetic field simulations inside the human body in the vicinity of wireless power transfer systems with varying models
Norman Haussmann, Robin Mease, Martin Zang, Steven Stroka, Hendrik Hensel, Markus ClemensMagneto-quasi-static fields emanated by inductive charging systems can be potentially harmful to the human body. Recent projects, such as TALAKO and MILAS, use the…
A new structure for line-start non-slotted axial-flux permanent magnet motor, proposing a novel 3D FEA-based demagnetization reduction approach
Hadi Karimi Aliabad, Mohammadreza BaghayipourThis paper aims to propose a novel simple and efficient structure for line-start axial-flux permanent magnet (LSAFPM) synchronous motor, especially regarding the permanent…
Novel approach to stability analysis of DC drive with parameter uncertainty and perturbation in feedback system
Pasala GopiThe purpose of this study is to analyze direct current (DC) drive stability, including parameter uncertainty and perturbation in the feedback loop, by computing disk margins.
Sliding mode speed control of permanent magnet synchronous motor based on improved reaching law
Xinhong Zou, Hongchang Ding, Jinhong LiThis paper aims to present a sliding mode control method based on disturbance observer (DO) for improving the reaching law of permanent magnet synchronous motor (PMSM).
Double-wall pipe-type power-frequency electromagnetic heating device with diversion ring and its heating mode optimization
Feng Zhou, Zixuan Wang, Yuxiang ZhaoThe purpose of this paper is to study the pipe-type electromagnetic induction heating device under power frequency condition.
ISSN:
0332-1649Online date, start – end:
1982Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Prof Jan Sykulski