Assembling textile structures: wear simulation
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 1 March 1997
Abstract
Plans a wear simulation of assembled textile structures by sewing, basing the study on the submission of standardized seams carried out on 40 wool fabrics and blends containing wool to a series of 20 cycles of fatigue, including: washing, drying and submission to a static mechanical load under determined characteristics and steam ironing. Seams in the warp and weft directions were performed on. Examines the following parameters: fabric strength and elongation to break; seam strength and slippage; seam efficiency; seams’ opening limit and both the modulus at 1mm and at break, along the fatigue cycles. Analyses results obtained in function of the seam directions and fatigue cycles.
Keywords
Citation
Domingues, J.P., Manich, A.M., Sauri, R.M. and Barella, A. (1997), "Assembling textile structures: wear simulation", International Journal of Clothing Science and Technology, Vol. 9 No. 1, pp. 75-87. https://doi.org/10.1108/09556229710157894
Publisher
:MCB UP Ltd
Copyright © 1997, MCB UP Limited