Inter‐turn short‐circuit effect on induction machine iron losses
ISSN: 0332-1649
Article publication date: 13 July 2010
Abstract
Purpose
The aim of this paper is to estimate the iron losses for an induction machine in the healthy case taking the slotting effect into account and to study the effect of an inter‐turn short‐circuit on these losses. Theoretical results are then compared with experimental ones.
Design/methodology/approach
A simple analytical model of iron losses allows one to calculate and to appreciate the contribution of the slotting effect on induction machine iron losses without and with an inter‐turn stator short‐circuit. This semi‐analytical approach is based on the iron stator and rotor flux density repartition which is deduced from the air‐gap flux density.
Findings
The iron losses are not only due to the fundamental air‐gap flux density, but also to the slotting harmonics. In fact, the slotting effect generates harmonic flux density waves with very low magnitudes but with high‐angular velocities, leading to non‐negligible harmonic iron dynamic losses which have similar values on both the stator and the rotor. The inter‐turn short‐circuit generates an iron losses and a slotting harmonic contribution increase.
Research limitations/implications
Experimental measurements give the total iron losses. They do not allow separating the fundamental and the slotting harmonics contribution.
Practical implications
The knowledge of the iron losses behaviour in the healthy machine taking into account the slotting effect is important to optimize the design. The fault contribution on these losses allows one to estimate the damage which can be engendered by the fault.
Originality/value
Generally, iron losses studies and calculations are performed numerically using finite element software. The analytical approach can be interesting because it allows one to make faster calculations and to analyze the influence of the machine geometric parameters.
Keywords
Citation
Jelassi, S., Romary, R. and Brudny, J.F. (2010), "Inter‐turn short‐circuit effect on induction machine iron losses", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 29 No. 4, pp. 1070-1080. https://doi.org/10.1108/03321641011044488
Publisher
:Emerald Group Publishing Limited
Copyright © 2010, Emerald Group Publishing Limited