To read this content please select one of the options below:

Cable‐crawler – robot for the inspection of high‐voltage power lines that can passively roll over mast tops

Maleachi Bühringer (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Jan Berchtold (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Melanie Büchel (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Claus Dold (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Michael Bütikofer (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Mevina Feuerstein (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Wolfgang Fischer (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Christian Bermes (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)
Roland Siegwart (Autonomous System Lab, ETH Zürich, Zürich, Switzerland)

Industrial Robot

ISSN: 0143-991x

Article publication date: 3 May 2010

713

Abstract

Purpose

The purpose of this paper is to describe the design and prototype implementation of the “Cable Crawler”, a mobile teleoperated robot for the inspection of high‐voltage power lines which rides on the topmost ground cable. By not being limited to just moving from mast to mast, it implements an innovative mechanism that allows for crossing a set of mast tops as well as smaller obstacles autonomously.

Design/methodology/approach

After a brief overview of the state‐of‐the‐art for this application, the basic concept of the robot is presented – which basically consists of a chassis and six motorized rubber‐coated rollers, two in a horizontal position to take the weight and four vertical ones. The four vertical rollers are pressed onto the wire by springs, which guarantees slip‐less propulsion in difficult situations. The detailed design of the most challenging components is presented, as well as the successful tests with the prototype.

Findings

The feasibility of the concept is proven with a prototype implementation and successful test results.

Practical implications

With a mass of 58 kg and only six drives, it consequently follows the industry's wish to have a robust, easy to maintain and rather cheap solution. Regarding the fields examined by the robot, the project concentrated on the detection of trees growing into proximity of the wires. Future work will mainly stress in further reducing the robot's mass and in facilitating its transport to the mast by the workers.

Originality/value

The presented prototype allows for moving on the topmost ground cable of high‐voltage power‐lines and to passively roll over mast tops and smaller obstacles. With these properties, it is able to inspect long distances of cables in an autonomous way and by using a relatively low‐cost and robust robot.

Keywords

Citation

Bühringer, M., Berchtold, J., Büchel, M., Dold, C., Bütikofer, M., Feuerstein, M., Fischer, W., Bermes, C. and Siegwart, R. (2010), "Cable‐crawler – robot for the inspection of high‐voltage power lines that can passively roll over mast tops", Industrial Robot, Vol. 37 No. 3, pp. 256-262. https://doi.org/10.1108/01439911011037659

Publisher

:

Emerald Group Publishing Limited

Copyright © 2010, Emerald Group Publishing Limited

Related articles