To read the full version of this content please select one of the options below:

The impact of crankcase oil containing phosphorus on catalytic converters and engine exhaust emissions

Hakan Kaleli (Associate Professor Doctor at Yildiz Teknik Universitesi, Istanbul, Turkey)

Industrial Lubrication and Tribology

ISSN: 0036-8792

Article publication date: 1 December 2001

Downloads
1032

Abstract

Two 10W30 mineral‐base phosphorus containing (commercial) and phosphorus‐free (P‐Free) crankcase oils were tested in the engine dynamometer for the poisoning effects on a catalytic converter and emission‐engine’s performance. The emission results of the two oils were compared with and without a catalytic converter, including the light‐off temperature of the catalyst. Surface characterisation was used to determine accumulated catalyst poisoning from the oil additives. The performance analysis shows that the catalytic converter lowers the torque and power for the commercial and P‐Free oils, whereas the specific fuel consumption increases for both oils in the presence of the catalytic converter. In both cases of the presence and the absence of catalytic converter the torque, power and specific fuel consumption remain the same for phosphorus containing and P‐Free oils. The presence of the catalytic converter shows lower HC and CO and higher CO2 emissions for both P‐Free and commercial oils. Surface characterisation using x‐ray microanalysis techniques of Scanning Electron Microscopy and indicated residual amounts of poisons, predominantly P, Ca, S and Zn deposited on the catalyst.

Keywords

Citation

Kaleli, H. (2001), "The impact of crankcase oil containing phosphorus on catalytic converters and engine exhaust emissions", Industrial Lubrication and Tribology, Vol. 53 No. 6, pp. 237-255. https://doi.org/10.1108/00368790110408337

Publisher

:

MCB UP Ltd

Copyright © 2001, MCB UP Limited