Search results

This study analyzed Korea's relations table through network analysis. In particular, among the centralities, eigenvector centrality, PageRank centrality and degree were used. The author studied which network characteristics affected the value-added rate.

A network analysis method was used.

It is the inward relationship that affects the value-added ratio of Korea's industries and the outward relationship has less influence. In particular, the inward relationship not only acts as a cost but also has an effect on the rate of added value recently.

Since the three years of 2010, 2015 and 2019 are the target, the data are somewhat insufficient to generalize.

As for the value-added ratio of an industry, input is more important than output (sales). Therefore, where the input is received is very important.

It is possible to increase the understanding of the determinants of the value-added rate of Korean industries.

(1) It was clarified which side is inward or outward in determining the industry in Korea. (2) The relationship between PageRank, eigenvector centrality and degree was analyzed in Korean cases. (3) Input is a cost and acts to increase added value.

The purpose of this paper is to settle the methodological debate on the decomposition of value added in gross exports, proposing a standard, exposing the drawbacks of the alternatives and quantifying the differences.

This paper systematizes the analytical framework and assesses and quantifies the various methodologies and its main differences.

The decomposition method of Borin and Mancini (2023), using a source-based approach and an exporting country perspective, should be considered as the standard for decomposing the value added in gross exports. This study finds that alternative approaches and perspectives are methodologically inferior, and that tailored perspectives do not provide an increase in accuracy that compensates their drawbacks.

This paper’s contribution is fourfold: it rejects the alleged equivalence between approaches and perspectives, defending the superiority of a particular method, approach and perspective; it gives quantitative examples of the differences between them; it proves that the drawbacks of tailored perspectives do not compensate their alleged accuracy (as they do not result in big quantitative differences with the standard perspective); and it argues that no valid standard decomposition can forego the calculation of value added exported, which requires the expression of exports in terms of final demand.

This study aims to investigate the mediating role of lean management on the relationship between workforce management and value-added time in private hospitals. This study also investigates the direct influences of workforce management and lean management on the value-added time of the hospitals.

This study applied a quantitative approach to obtain data from the private hospitals’ staff in Peninsular Malaysia. A self-administered survey questionnaire was used to collect data from 287 hospital staff using a stratified random sampling method. The partial least squares structural equation modeling (PLS-SEM) approach was used to determine the internal consistency, reliability, validity of the constructs. The PLS-SEM method was also used to test the hypothesised research model via SmartPLS 3.3.4 version.

The findings of the study indicate that lean management has a direct and significant effect on the value-added time of private hospitals. The findings also revealed that lean management significantly mediates the relationship between workforce management and value-added time in private hospitals. The analysis of the results indicates that both workforce and lean management have a significant impact on the value-added time of the hospitals.

This study provides empirical contributions to enhance the quality of workforce management, lean management and value-added time. The findings of this study provide valuable insights into how effectively managing the workforce and providing guidelines to augment the lean management practices can ensure value-added time in Malaysian hospitals and the overall health-care industry. The lean management framework provides useful insights for the policymakers to understand the significance of workforce management, lean management on ensuring value-added time through reducing waiting times, unnecessary delays, generating a higher degree of patient safety, satisfaction and loyalty.

The research findings provide some essential indications for the health-care service providers to understand how the lean management approach can be implemented to enhance value-added time and how lean management can play a mediating role in creating a link between workforce management and value-added time in hospitals. This study also contributes to the theoretical and practical perspectives. The present study contributes to a better understanding of workforce management and lean management in health-care sectors from theoretical and practical perspectives.

This study aims to provide an empirical investigation into rising capital flight and the role of institutional quality to mitigate its effect on the real sector in sub-Saharan Africa (SSA).

The study uses the system generalized method of moments and uses data spanning from 1989 to 2020 from 26 SSA countries.

The findings show that capital flight has no direct impact on the real sector while institutional quality adversely impacted the agricultural and industrial sectors. The study also found that institutional quality is unable to mitigate the effect of capital flight on the industrial sector.

This study investigates if institutional quality mitigates the impact of capital flight on the real sector proxied by industrial value-added and agriculture value-added.

This study aims to examine the effect of structural transformation on poverty alleviation in Sub-Saharan Africa (SSA) countries with a higher share of services as a percentage of gross domestic product (GDP). The study specifically focuses on the value-added share as a percentage of GDP in the agricultural, manufacturing, industrial, and service sectors using time series data from 1988 to 2019.

The study utilizes the autoregressive distributive lag (ARDL) bound test framework for estimation, based on the conclusions drawn from the augmented Dickey-Fuller and Phillips–Perron unit root tests, which provide evidence of a mixed order of integration.

The result reveals that agriculture value-added (AVA), manufacturing value-added (MVA), industrial value-added (IVA), and services value-added (SVA) have a positive and significant impact on poverty alleviation in both the short and long run. However, the agriculture sector is found to be more effective in reducing poverty compared to the other sectors examined in this study. Additionally, this study challenges the notion that SSA countries have undergone an immature structural transformation. Instead, it reveals a pattern of stagnant structural transformation, as indicated by the lack of growth in the industrial and manufacturing value-added shares of GDP.

To enhance productivity and reduce poverty, SSA economies should adopt a development strategy that prioritizes heavy manufacturing and industrial sectors, leading to a transition from the agricultural to the secondary and tertiary sectors.

The study contributes to the emerging literature on structural transformation by investigating which sector is more efficient in reducing poverty in SSA countries, using the value-added share as a percentage of GDP for agricultural, manufacturing, industrial, and service sectors. The study also aims to determine if SSA countries have experienced immature structural transformation due to the growing share in the service sector.

The main goal of this paper is to examine the evolution of Latin American productive integration in terms of the regional value added incorporated in intra-regional exports of Argentina, Brazil, Chile, Colombia, Mexico and Peru. In addition, the study traces the trade and productive integration trajectories for each of these countries from 1995 to 2015.

Based on the use of OECD’s global ICIO input-output tables, this paper applies the methodological framework by Wang et al. (2018) for the analysis of trade flows at the bilateral level, which allows breaking down the value of gross exports of each sector-country, depending on the origin of the value added contained in exports, as well as their use.

The estimates show very low shares of value added from regional partners in the intra-regional exports of the countries studied. Conversely, the weight of the value added incorporated in these exports by countries outside the region has increased in tandem with China’s expanding involvement in Latin America. This development, along with the downward trend in domestic value added incorporated in exports, indicates a lack of a regional integration process of any depth.

This article addresses an economic problem of conventional importance from a global value chain perspective using a novel methodology based on the use of global input–output tables.

With the continuous improvement of public–private partnership (PPP) projects, the participants' value creation goals are not only limited to achieving the basic performance objectives but also to realising value added. However, the effect of traditional contract management on realising the value creation objectives of PPP projects is limited. According to the view of multifunctional contract, joint-contract functions that integrate contract control and flexibility are likely to be effective in enhancing the value creation of PPP projects. This study aims to explore the effects of joint-contract functions on PPP project value creation and relevant influencing mechanism by investigating the mediating effect of in-role behaviour and extra-role behaviour.

After collecting 258 valid questionnaires from PPP professionals in China, this study used structural equation modelling to validate the hypotheses.

Contract control and flexibility can improve PPP project value creation. Specifically, contract control improves the achievement of the basic contract objectives of PPP projects, whereas contract flexibility enhances the achievement of the value-added of PPP projects. Moreover, only in-role behaviour mediates the effect of contract control on value creation. In addition, the mediating effect of extra-role behaviour on the impact of contract flexibility on value creation is stronger than that of in-role behaviour. The mediating effect of in- and extra-role behaviour is mainly reflected in the realisation of basic and value-added performance, respectively.

The findings of this study can help realise value creation in three ways. Firstly, new perspectives for PPP project value creation should be proposed by combining the improvement of contract objectives and the realisation of the participants' implicit demands. Secondly, the effects of different contract functions on value creation should be analysed instead of a single dimension of contractual governance. Thirdly, the mediating effects of different types of cooperation behaviour that may influence the relationship between contractual governance and value creation should be evaluated.

This study verifies the impacts of different contract functions on PPP project value creation. In addition, cooperative behaviour is embedded as a mediating variable, and the mediated transmission path from contract function to cooperative behaviour and further to PPP project value creation is systematically analysed.

The authors investigate the impact of standards compliance on the participation in the global value chain and labour value-added of Vietnam’s small and medium-sized enterprises (SMEs).

The authors use a three-period panel dataset of SMEs combined with Vietnam’s Provincial Competitiveness Index. The authors also use multiple econometric models; and with each model, the authors include all independent variables that are available from the study's data and that are suggested by the literature.

The authors find that standards compliance by Vietnam’s SMEs improved their participation in the global value chain via subcontracts with FDI multinational firms. The authors also find that standards compliance improved the value-added of labour in Vietnam’s SMEs, which is robust to the choice of econometric models.

The study's results suggest that better outcomes for firms and society will be possible if standards are recognised and respected.

This paper complements scant literature on the impact of standards compliance on global value chain participation via subcontracting work and labour value-added, especially in developing countries.

Economic ties and formation of trade blocks escalates the movement of goods among the participants and bring different economic and structural changes. Therefore, the current research emphasises on the distribution of market structure and industrial value added among the participant countries of China–Pakistan economic corridor project while focussing on pre and post FTA status.

This study utilises the footloose capital model for analysing whether China or Pakistan is more suitable for attracting factors of production to increase their share of industrial value added. For econometric analyses the current research utilises data from 1995 to 2018 and maximum likelihood effect method to assess factors that affect regional value-added distribution.

Results show that both countries owe different level of economic developments. Effect of capital is, comparatively, similar for both countries while Pakistan supports trade openness which points towards the fact of positive utilisation of abundant labour resources in Pakistan by establishing industrial structure either through domestic capital formation or foreign investment. Whereas, share of labour and trade openness of China positively affect value added production of China.

This is one of the unique studies that studies the regional economic treaties usefulness for any developing country across Asia. Where this study uses the footloose capital model and maximum likelihood method for its analysis which is not previously done, while for detailed analyses the study further divides the timeframe into two parts as pre-FTA ranges from 1995 to 2006, post-FTA from 2007 to 2018 while overall results consist of whole-time frame.

In Italy, worker cooperatives (WCs), whose workers hold major control rights over collectively-owned assets, are the leading vehicle for the promotion and development of employee ownership. Worker cooperatives are present in all regions and in most economic sectors, employing about 506,000 workers and generating a turnover of about €22 bn. Despite their history and diffusion, the high prevalence of WCs in Italy is under-researched and -thematised and requires new research.

The paper leverages unpublished primary and secondary data from Centro Studi Legacoop databank, the Aida-Bureau Van Dijk databank and the Cooperative Registry of the Ministry of Economic Development (CRMED) to explain the spread of WCs in Italy.

This paper reveals descriptive statistics of WCs and investigates their distribution across economic sectors and regions, their economic and financial performance and gives an overview of the relevant legislation. The paper indicates that older small- and medium-sized cooperatives located in central and north-eastern Italy perform best economically. However, in recent years, an increasing number of young cooperatives has emerged in South Italy thanks to favourable legislation, cooperative finance and the diffusion of cooperative know-how. Limitations to such results are reported in the conclusions.

The paper sheds light on past and recent development trends of WCs in Italy, highlights their growth in South Italy and revitalises the debate on the drivers, structures and rationales of employee-owned enterprises in Italy. Findings generate implications for research and practice. Given the tendency of WCs to better protect jobs than investor-owned enterprises, the spread of these enterprises may help workers find better and more stable jobs, counter-cyclically mitigating the dangerous effects of macro- and meso-economic fluctuations and instability.