Search results

Using a combination of the geographical information system (GIS) and the Canadian water quality index (WQI), the current study sought to provide a long-term general assessment of the water quality of the Shatt Al-Arab River (SAAR), focusing on its suitability for living organisms. Likewise, SPSS statistics was used to develop a nonlinear WQI regression model for the study area.

The study required four decades of data collection on some environmental characteristics of river water. After that, calculate the WQI and conduct the spatial analysis. Eight variables in total, including water temperature, dissolved oxygen, potential hydrogen ions, electrical conductivity (EC), biological oxygen demand, turbidity, nitrate and phosphate, were chosen to calculate the WQI.

Throughout the study periods, the WQI values varied from 55.2 to 79.83, falling into the categories of four (marginal) and three (fair), with the sixth period (2007–2008) showing the most decline. The present research demonstrated that the high concentration of phosphates, the high EC values, and minor changes in the other environmental factors are the major causes of the decline in water quality. The variations in ecological variables' overlap are a senior contributor to changes in water quality in general. Notably, using GIS in conjunction with the WQI has shown to be very effective in reducing the time and effort spent on investigating water quality while obtaining precise findings and information at the lowest possible expense. Calibration and validation of the developed model showed that this model had a perfect estimate of the WQI value. Due to its flexibility and impartiality, this study recommends using the proposed model to estimate and predict the WQI in the study area.

Even though the water quality of the SAAR has been the subject of numerous studies, this is the only long-term investigation that has been done to evaluate and predict its water quality.

Previous research suggests that the compensation offered to customers after a service failure has to be substantial to make customer satisfaction surpass that of an error-free service. However, with the right service recovery strategy, it might be possible to reduce compensation size while maintaining happy customers. The aim of the current study is to test whether an anchoring technique can be used to achieve this goal.

After experiencing a service failure, participants were told that there is a standard size of the compensation for service failures. The size of this standard was different depending on condition. Thereafter, participants were asked how much they would demand to be satisfied with their customer experience.

The compensation demand was relatively high on average (1,000–1,400 SEK, ≈ $120). However, telling the participants that customers typically receive 200 SEK as compensation reduced their demand to about 800 SEK (Experiment 1)—an anchoring effect. Moreover, a precise anchoring point (a typical compensation of 247 SEK) generated a lower demand than rounded anchoring points, even when the rounded anchoring point was lower (200 SEK) than the precise counterpart (Experiment 2)—a precision effect.

Setting a low compensation standard—yet allowing customers to actually receive compensations above the standard—can make customers more satisfied while also saving resources in demand-what-you-want service recovery situations, in particular when the compensation standard is a precise value.

Faced with contradictory outcomes in empirical studies on the relation between democracy and income inequality, this paper attempts to provide empirical relations between democracy and income inequality. In particular, the authors seek to find if any curvilinear relation exists as in the Kuznets hypothesis.

Given elusiveness in empirical relations, the authors will consider several specifications using different estimation methods such as ordinary least squares (OLS), panel data estimation and performing statistical tests to determine the best specification for the relation between income inequality and democracy. Once the authors choose the specification, then the authors will apply this specification to the different groups of data to find any meaningful implications.

Using the unbalanced panel of 136 countries spanning from 1980 to 2018, the authors found an inverse U-shaped relation, called a political Kuznets curve – income inequality increases first and then decreases later as more democracy is achieved. By quantifying the curve, the authors find that the direct impact of democracy on income inequality is small and that the incremental impact of democracy on income inequality is smaller in a semi-democracy while relatively larger in a full democracy and autocracy.

From the study’s findings, the following policy implications can be considered. First, any change in income inequality caused by democratization should not be concerning as the impact of democracy on income inequality is measured to be very small. Second, the largest factor reducing income inequality is real GDP per capita. Third, the authors find that an impact of government expenditure on income inequality is also inversely U-shaped.

This paper aims to automatically obtain the implant parameter from the CBCT images to improve the outcome of implant planning.

This paper proposes automatic simulated dental implant positioning on CBCT images, which can significantly improve the efficiency of implant planning. The authors introduce the fusion point calculation method for the missing tooth's long axis and root axis based on the dental arch line used to obtain the optimal fusion position. In addition, the authors proposed a semi-interactive visualization method of implant parameters that be automatically simulated by the authors' method. If the plan does not meet the doctor's requirements, the final implant plan can be fine-tuned to achieve the optimal effect.

A series of experimental results show that the method proposed in this paper greatly improves the feasibility and accuracy of the implant planning scheme, and the visualization method of planting parameters improves the planning efficiency and the friendliness of system use.

The proposed method can be applied to dental implant planning software to improve the communication efficiency between doctors, patients and technicians.

This study examines the impact of university science parks’ (USPs) capabilities on revenue generation and introduces regional innovation as a moderating variable. This study aims to provide insights into enhancing revenue generation and fully leveraging the role of USPs in promoting revenue generation.

This study employs system generalized method of moments (GMM) estimation for 116 universities in China from 2008 to 2020, using hierarchical regression analysis to examine the relationships between variables.

The findings suggest that USPs play a beneficial role in fostering revenue generation. Specifically, the provision of incubation funding demonstrates a positive correlation, while USPs size exhibits an inverted U-shaped pattern, with a threshold at 3.037 and a mean value of 3.712, highlighting the prevalent issue of suboptimal personnel allocation in the majority of USPs. Moreover, the analysis underscores the critical moderating influence of regional innovation, affecting the intricate interplay between USPs size, incubation funding and revenue generation.

The single country (China) analysis relied solely on the use of secondary data. Future studies could expand the scope to include other countries and employ primary data collection. For instance, future research can further examine how regional development and USPs strategic plan impact revenue generation.

The study recommends that USPs managers and policymakers recognize the importance of incubation funding and determine the optimal quantity of USPs size to effectively foster revenue generation in USPs. Policymakers can use regional innovation as a moderating variable to reinforce the relationship between USPs size and incubation funding on revenue generation.

The study’s findings can contribute to the strategic industry growth and economic development of nations by promoting revenue generation. Leveraging the role of USPs and implementing the study’s recommendations can strengthen innovation and technology capabilities, driving strategic industry growth and economic development. This can enhance global competitiveness and promote sustainable economic growth.

This study introduces regional innovation as a moderating variable and provides empirical evidence of its influence on the relationship between USPs size and incubation funding on revenue generation. This adds value to research to the existing literature on USPs and revenue generation by showcasing the importance of examining the regional impact in research and innovation.

The safety management of construction machines is of primary importance. Considering that traditional construction machine safety monitoring and evaluation methods cannot adapt to the complex construction environment, and the monitoring methods based on sensor equipment cost too much. This paper aims to introduce computer vision and deep learning technologies to propose the YOLOv5-FastPose (YFP) model to realize the pose estimation of construction machines by improving the AlphaPose human pose model.

This model introduced the object detection module YOLOv5m to improve the recognition accuracy for detecting construction machines. Meanwhile, to better capture the pose characteristics, the FastPose network optimized feature extraction was introduced into the Single-Machine Pose Estimation Module (SMPE) of AlphaPose. This study used Alberta Construction Image Dataset (ACID) and Construction Equipment Poses Dataset (CEPD) to establish the dataset of object detection and pose estimation of construction machines through data augmentation technology and Labelme image annotation software for training and testing the YFP model.

The experimental results show that the improved model YFP achieves an average normalization error (NE) of 12.94 × 10^–3, an average Percentage of Correct Keypoints (PCK) of 98.48% and an average Area Under the PCK Curve (AUC) of 37.50 × 10^–3. Compared with existing methods, this model has higher accuracy in the pose estimation of the construction machine.

This study extends and optimizes the human pose estimation model AlphaPose to make it suitable for construction machines, improving the performance of pose estimation for construction machines.

This paper investigates the relationship between the sustainable finance disclosure regulation (SFDR) and the performance of unlisted real estate funds.

While existing literature has primarily focused on the impact of voluntary sustainability disclosure, such as certifications or reporting standards, this study addresses a significant research gap by constructing and analyzing the financial J-Curve of 40 funds under the SFDR. The authors employ a panel regression analysis to examine the effects of different SFDR categories on fund performance.

The findings reveal that funds categorized under Article 8 of the SFDR do not exhibit significantly poorer performance compared to funds categorized under Article 6 during the initial phase after launch. On average, Article 8 funds even demonstrate positive returns earlier than their peers. However, the panel regression analysis suggests that Article 8 funds slightly underperform when compared to Article 6 funds over time.

While investors may not anticipate lower initial returns when opting for higher SFDR categories, they should nevertheless be aware of the limitations inherent in the existing SFDR labeling system within the unlisted real estate sector.

To the best of our knowledge, this study represents the first quantitative examination of unlisted real estate fund performance under the SFDR. By providing unique insights into the J-Curves of funds, our research contributes to the existing body of knowledge on the impact of sustainability regulations in the financial sector.

This purpose of this study is to explore the impact of global trend of economic integration and interconnectedness which has drawn the attention of world economies and their implications on trade inflow. This trajectory has its impact, either positive/negative, on key macroeconomic indicators, to say the least on environmental sustainability, especially emerging economies. To this end, the need to explore the connection between foreign direct investment (FDI) inflow and energy consumption amidst the wave of economic globalisation is timely and pertinent for the case of Turkey.

This study seeks to explore the interaction between the outlined variables in a carbon-income framework for annual time series data from 1970 to 2016. A series of econometrics strategies was used consisting of unit root tests to examine the stationarity properties of the highlighted series. Subsequently, Pesaran’s Bounds testing technique is used to explore the long-run equilibrium relationship between the highlighted variables in conjunction with the Johansen cointegration test. For long-run regression coefficients, Pesaran’s autoregressive distributed lag and dynamic ordinary least squares methodology are used, and innovative accounting approaches are used to explore the responsiveness of each variable on another.

Empirical results validate the pollution haven hypothesis (PHH) in the long run for the case of Turkey. Thus suggesting that FDI inflow induced environmental degradation in Turkey. Additionally, this study observed that renewable energy, on the contrary, improves the quality of the environment. This study also affirms the presence of the environmental Kuznets curve phenomenon, indicating that Turkey, at its early stage of economic trajectory, emphasis is on economic growth rather than environmental quality. This suggests a need for more deliberate action(s) by the government administrators to pursue cleaner FDI inflow and energy technologies and strategies to foster a clean environment in Turkey and a cleaner ecosystem at large.

This study is unique in its choice of variables which is in line with the United Nations Sustainable Development Goals (SDGs) agenda to be achieved by 2030 and is very limited in the extant literature. From the economic perspective, the effect of the PHH is of interest especially to ascertain the extent the interplay among the variables has on the economy of Turkey. The empirical insights on PHH hypothesis have received less documentation in the extant literature especially for emerging economy like Turkey. Thus, this study seeks to revisit this theme for Turkey with aim to presents environmentally sustainable strategies without compromise for economic growth. Thus, this study seeks to revisit this theme.

Prefabricated columns connected by grouted sleeves are increasingly used in practical projects. However, seismic fragility analyses of such structures are rarely conducted. Seismic fragility analysis has an important role in seismic hazard evaluation. In this paper, the seismic fragility of sleeve connected prefabricated column is analyzed.

A model for predicting the seismic demand on sleeve connected prefabricated columns has been created by incorporating engineering demand parameters (EDP) and probabilities of seismic failure. The incremental dynamics analysis (IDA) curve clusters of this type of column were obtained using finite element analysis. The seismic fragility curve is obtained by regression of Exponential and Logical Function Model.

The IDA curve cluster gradually increased the dispersion after a peak ground acceleration (PGA) of 0.3 g was reached. For both columns, the relative displacement of the top of the column significantly changed after reaching 50 mm. The seismic fragility of the prefabricated column with the sleeve placed in the cap (SPCA) was inadequate.

The sleeve was placed in the column to overcome the seismic fragility of prefabricated columns effectively. In practical engineering, it is advisable to utilize these columns in regions susceptible to earthquakes and characterized by high seismic intensity levels in order to mitigate the risk of structural damage resulting from ground motion.

Sub-Saharan Africa is a region that is highly vulnerable to the effects of climate change. Renewable energy consumption could play a major role in mitigating the effects of climate change by improving environmental quality in the region. The purpose of this paper is to examine the effect of renewable energy consumption on environmental quality in sub-Saharan African countries.

The empirical investigation is based on the estimation of an augmented Green Solow model through the defactored instrumental variables approach on a sample of 34 countries over the period 1996 to 2018.

The results of two-stage defactored instrumental variables estimator show that renewable energy consumption improves environmental quality. Indeed, renewable energies have a significant negative influence on CO₂ emissions. This result is robust when using the ecological footprint as an indicator of environmental quality.

In terms of implications, governments in Sub-Saharan Africa need to pursue policies to encourage investment in the renewable energy sector. This will promote renewable energy consumption, change the structure of the energy mix in favour of renewable energy, improve environmental quality and effectively combat climate change.

The originality of this research in relation to the existing literature lies at several levels. Firstly, the analysis is carried out using a unified framework combining the environmental Kuznets curve and the environmental convergence hypotheses. Secondly, this research uses a very recent econometric method. Finally, environmental quality is measured using two indicators.