Search results

The purpose of this paper is to analyze the influence of different types of winding configurations on the distribution of leakage field and branch currents for a 330-kVA high-temperature superconducting (HTS) transformer winding.

A three-dimensional electromagnetic model coupled with a circuit model validated by an experiment is developed to calculate the leakage field and current uniformity under four different types of secondary winding configurations. The four types of gaps between secondary windings are uniform gap, arithmetic progression (AP) gap, six sections with three different gaps and eight sections with four different gaps. A coefficient named as uneven degree is used to define the current nonuniformity.

The simulation results show that the currents and leakage field of double pancakes (DPs) on both sides are larger than those of the other DPs, and the currents of several middle DPs are smaller than the average rated current with an ISOB gap and larger than the average rated current with an IBOS gap. For any one of the four types of winding configurations, the type with the ISOB gap can prohibit the current nonuniformity more effectively, whereas the IBOS gap can decrease the leakage field more. The AP with the ISOB gap is a wise choice for decreasing the uneven degree and leakage field.

There is an optimal winding configuration for decreasing the leakage field and uneven degree of branch currents. The results and numerical model are very useful for the design of a HTS transformer.

The leakage field distribution and branch currents nonuniformity for 25 parallel DPs are investigated and optimized.

The purpose of this paper is to propose a hybrid driving system that couples a motor and flywheel energy storage (FES) for a megawatt-scale superconducting direct current (DC) induction heater. Previous studies have proven that a superconducting DC induction heater has great advantages in relation to its energy efficiency and heating quality. In this heater, a motor rotates an aluminium billet in a DC magnetic field and the induced eddy current causes it to be heated. When the aluminium billet begins to rotate, a high peak load torque appears at a low rotation speed. Therefore, driving the billet economically has been a great challenge when designing the driving system, which is the focus of this paper.

A hybrid driving system based on FES is designed to provide extra torque when the peak load torque occurs at a low rotation speed, which allows the successful start-up of the aluminium billet and the operation of the motor at its rated capacity. The mechanical structure of this hybrid driving system is introduced. A simulation model was constructed using Matlab/Simulink and the dynamic start-up process is analysed. The influence of the flywheel’s inertia and required minimum engagement speed are investigated.

The results of this paper show that the hybrid driving system that couples FES and a motor can successfully be used to start the aluminium billet rotating. The flywheel’s inertia and engagement speed are the most important parameters. The inertia of the flywheel decreases with an increase in its engagement speed.

The cost of the driving system is significantly reduced, which is very important in relation to the commercial potential of this apparatus.

A novel start-up strategy for driving the aluminium billet of a superconducting DC induction heater at low speed is proposed based on FES.

The purpose of this study is to propose a modeling method of the equivalent circuit for a new type of high-temperature superconducting partial-core transformer (HTS-PCT) made of ReBCO-coated conductors.

The modeling process is based on the “Steinmetz” equivalent circuit. The impedance components in the circuit are obtained by the calculations of the core losses and AC losses of the HTS windings by using theoretical methods. An iterative computation is also used to decide the equivalent resistances of the AC losses of the primary and secondary HTS windings. The reactance components in the circuit are calculated from the energy stored in the magnetic fields by finite element method. The validation of the modeling method is verified by experimental results

The modeling method of the equivalent circuit of HTS-PCT is valid, and an equivalent circuit for HTS-PCT is presented.

The equivalent circuit of HTS-PCT could be obtained by the suggested modeling method. Then, it is easy to analyze the characteristics of the HTS-PCT by its equivalent circuit. Moreover, the modeling method could also be useful for the design of a specific HTS-PCT.

The study proposes a modeling method of the HTS-PCT made of the second-generation HTS tapes, i.e. ReBCO-coated conductors.

The purpose of this paper is to analyse and improve the temperature uniformity of aluminium billets heated by superconducting DC induction heaters.

A 3D electromagnetic model coupled with a heat transfer model is developed to calculate the heating process of the billets which are rotated in uniform transverse DC magnetic field. A laboratory-scale DC induction heater prototype has been built to validate the model. The results from simulation and measurement have a good agreement. The model is used to investigate the factors affecting the temperature uniformity of aluminium billets.

The results from simulation show that lower rotation speeds always mean better temperature uniformity along the radial direction, due to the increase in power penetration. However, the situation is very different for the temperature distribution along the axial direction. When the rotation speed is low, the temperature at the ends is lower than other parts. The situation reverses as the rotation speeds increase. This phenomenon is referred to as the “ending effect” in this paper.

Because of the ending effect, a lower rotation speed does not always result in better overall temperature uniformity, especially for billets of smaller sizes.

There is an optimal rotation speed that yields the best overall temperature uniformity. Lower rotation speeds are not always preferred. The results and numerical model developed are very useful in the design of a superconducting DC induction heater.

The temperature uniformity of aluminium billets heated by DC induction heaters is investigated and optimized.