Search results
1 – 10 of 250Yanmin Zhou, Zheng Yan, Ye Yang, Zhipeng Wang, Ping Lu, Philip F. Yuan and Bin He
Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing…
Abstract
Purpose
Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.
Design/methodology/approach
This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.
Findings
This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.
Originality/value
The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.
Details
Keywords
Sarah Marschlich and Laura Bernet
Corporations are confronted with growing demands to take a stand on socio-political issues, i.e. corporate social advocacy (CSA), which affects their reputation in the public…
Abstract
Purpose
Corporations are confronted with growing demands to take a stand on socio-political issues, i.e. corporate social advocacy (CSA), which affects their reputation in the public. Companies use different CSA message strategies, including calling the public to support and act on the issue they advocate. Using reactance theory, the authors investigate the impact of CSA messages with a call to action on corporate reputation in the case of a company's gender equality initiative.
Design/methodology/approach
A one-factorial (CSA message with or without a call to action) between-subjects experiment was conducted by surveying 172 individuals living in Switzerland. The CSA messages were created in the context of gender equality.
Findings
The authors' study indicates that CSA messages with a call to action compared to those without overall harmed corporate reputation due to individuals' reactance, which is higher for CSA messages with a call to action, negatively affecting corporate reputation. The impact of the CSA message strategy with a call to action on corporate reputation remains significant after controlling for issue alignment and political leaning.
Originality/value
Communicating about socio-political issues, especially taking a stand, is a significant challenge for corporations in an increasingly polarized society and has often led to backlash, boycotts and damage to corporate reputation. This study shows that the possible adverse effects of advocating for socio-political issues can be related to reactance. It emphasizes that companies advocating for contested issues must be more cautious about the message strategy than the issue itself.
Details
Keywords
Rongsheng Wang, Tao Zhang, Zhiming Yuan, Shuxin Ding and Qi Zhang
This paper aims to propose a train timetable rescheduling (TTR) approach from the perspective of multi-train tracking optimization based on the mutual spatiotemporal information…
Abstract
Purpose
This paper aims to propose a train timetable rescheduling (TTR) approach from the perspective of multi-train tracking optimization based on the mutual spatiotemporal information in the high-speed railway signaling system.
Design/methodology/approach
Firstly, a single-train trajectory optimization (STTO) model is constructed based on train dynamics and operating conditions. The train kinematics parameters, including acceleration, speed and time at each position, are calculated to predict the arrival times in the train timetable. A STTO algorithm is developed to optimize a single-train time-efficient driving strategy. Then, a TTR approach based on multi-train tracking optimization (TTR-MTTO) is proposed with mutual information. The constraints of temporary speed restriction (TSR) and end of authority are decoupled to calculate the tracking trajectory of the backward tracking train. The multi-train trajectories at each position are optimized to generate a time-efficient train timetable.
Findings
The numerical experiment is performed on the Beijing-Tianjin high-speed railway line and CR400AF. The STTO algorithm predicts the train’s planned arrival time to calculate the total train delay (TTD). As for the TSR scenario, the proposed TTR-MTTO can reduce TTD by 60.60% compared with the traditional TTR approach with dispatchers’ experience. Moreover, TTR-MTTO can optimize a time-efficient train timetable to help dispatchers reschedule trains more reasonably.
Originality/value
With the cooperative relationship and mutual information between train rescheduling and control, the proposed TTR-MTTO approach can automatically generate a time-efficient train timetable to reduce the total train delay and the work intensity of dispatchers.
Details
Keywords
Nadeem Rais, Akash Ved, Mohd. Shadab, Rizwan Ahmad and Mohammad Shahid
Taurine (2-aminoethane sulfonic acid; C2H7NO3S) is a nonprotein sulfur-containing β-amino acid present in nearly all mammalian tissues and the most ubiquitous free endogenous…
Abstract
Purpose
Taurine (2-aminoethane sulfonic acid; C2H7NO3S) is a nonprotein sulfur-containing β-amino acid present in nearly all mammalian tissues and the most ubiquitous free endogenous biomolecule in human cells. Taurine is commonly known as a conditionally essential amino acid because taurine is one of the few amino acids that are not incorporated in protein synthesis. The purpose of this study is to review the existing articles related to taurine and to give an account how useful is taurine to the different body systems. In this thorough overview, taurine is covered in terms of its essentiality, sources, advantages for neonates and the elderly, the effects of taurine deficiency, and the safety and toxicity of taurine supplements.
Design/methodology/approach
This is a narrative review into the subject matter. Published articles were searched on different portals like PubMed, EMBASE, Scopus, Google Scholar, PubChem etc. The authors also evaluated the availability of taurine in commercially available energy drinks.
Findings
This comprehensive review, presents the potential clinical benefits and functional properties of taurine as a conditionally essential amino acid. Energy drinks containing taurine (and their concentration) are also reported in this review.
Originality/value
This is the first data that the authors are aware of that shows taurine content in a variety of energy drinks on the market.
Details
Keywords
Modupeola Dada, Patricia Popoola, Ntombi Mathe, Sisa Pityana and Samson Adeosun
In this study, AlCoCrFeNi–Cu (Cu-based) and AlCoCrFeNi–Ti (Ti-based) high entropy alloys (HEAs) were fabricated using a direct blown powder technique via laser additive…
Abstract
Purpose
In this study, AlCoCrFeNi–Cu (Cu-based) and AlCoCrFeNi–Ti (Ti-based) high entropy alloys (HEAs) were fabricated using a direct blown powder technique via laser additive manufacturing on an A301 steel baseplate for aerospace applications. The purpose of this research is to investigate the electrical resistivity and oxidation behavior of the as-built copper (Cu)- and titanium (Ti)-based alloys and to understand the alloying effect, the HEAs core effects and the influence of laser parameters on the physical properties of the alloys.
Design/methodology/approach
The as-received AlCoCrFeNiCu and AlCoCrFeNiTi powders were used to fabricate HEA clads on an A301 steel baseplate preheated at 400°C using a 3 kW Rofin Sinar dY044 continuous-wave laser-deposition system fitted with a KUKA robotic arm. The deposits were sectioned using an electric cutting machine and prepared by standard metallographic methods to investigate the electrical and oxidation properties of the alloys.
Findings
The results showed that the laser power had the most influence on the physical properties of the alloys. The Ti-based alloy had better resistivity than the Cu-based alloy, whereas the Cu-based alloy had better oxidation residence than the Ti-based alloy which attributed to the compositional alloying effect (Cu, aluminum and nickel) and the orderliness of the lattice, which is significantly associated with the electron transportation; consequently, the more distorted the lattice, the easier the transportation of electrons and the better the properties of the HEAs.
Originality/value
It is evident from the studies that the composition of HEAs and the laser processing parameters are two significant factors that influence the physical properties of laser deposited HEAs for aerospace applications.
Details
Keywords
Lorenzo Lynberg and Ahmed Deif
This paper addresses a gap in research literature in the fields of blockchain technology (BC), supply chain network dynamics (SC) and network effect phenomena (NE). Extant BC and…
Abstract
Purpose
This paper addresses a gap in research literature in the fields of blockchain technology (BC), supply chain network dynamics (SC) and network effect phenomena (NE). Extant BC and SC literature describes the potential benefits to be reaped through the adoption of BC technology. While BC technology does not yet meet the researched expectations of adoption, performance and efficacy, the authors analyze the three inter-related fields (BC, SC and NE) to bridge this gap in theory.
Design/methodology/approach
This paper begins with a research review correlating the technological fundamentals of BC technology into fundamental value propositions for SC logistics contexts. The authors review the gap between these theoretical technological functions and the current ecosystem of BC applications. With an overarching understanding of BC in SC contexts, this paper then explores the phenomena of NE and attempts to synthesize various interrelated aspects of the three fields (BC, SC and NE). Research frameworks from extant literature are used for cross-comparing legacy software/information system solutions with potential and existing BC-based solutions. Case studies are utilized to support this analysis.
Findings
Several key considerations and themes are identified to better inform practitioner and researcher decision-making. Novel insights pertain to BC platform architecture and application modularity, integrated governance and decision-making capabilities, and the automation capabilities that arise from a healthy application and smart contract ecosystem.
Originality/value
The core contribution is the synthesis of network effect theory with SC phenomena and BC theory and the exploration of how these three fields are inter-related in the maturation of BC technology. Specifically, the authors deepen insights from extant literature by contextualizing findings with relevant interdisciplinary theoretical frameworks.
Details
Keywords
Melanie Wiese and Liezl-Marié Van Der Westhuizen
This study aims to explore public coping strategies with government-imposed lockdown restrictions (i.e. forced compliance) due to a health crisis (i.e. COVID-19). This directly…
Abstract
Purpose
This study aims to explore public coping strategies with government-imposed lockdown restrictions (i.e. forced compliance) due to a health crisis (i.e. COVID-19). This directly impacts the public's power, as they may feel alienated from their environment and from others. Consequently, this study explores the relationships between the public's power, quality of life and crisis-coping strategies. This is important to help governments understand public discourse surrounding perceived government health crisis communication, which aids effective policy development.
Design/methodology/approach
An online questionnaire distributed via Qualtrics received 371 responses from the South African public and structural equation modelling was used to test the hypotheses.
Findings
The results indicate the public's experience of powerlessness and resulting information-sharing, negative word-of-mouth and support-seeking as crisis coping strategies in response to government-imposed lockdown restrictions.
Originality/value
The public's perspective on health crisis communication used in this study sheds light on adaptive and maladaptive coping strategies that the public employs due to the alienation they feel during a health crisis with government-forced compliance. The findings add to the sparse research on crisis communication from the public perspective in a developing country context and provide insights for governments in developing health crisis communication strategies. The results give insight into developing policies related to community engagement and citizen participation during a pandemic.
Details
Keywords
Johnson Okoro, Ambrose Ekeroku, Benedicta Nweze, Tobechukwu Odionye, Joel Nkire, Martins Onuoha, Chinenye Ezeonwuka and Jude Owoh
COVID-19 remains a public health emergency of international concern. Efforts at the global and national levels are being made to control its spread. The Nigerian Correctional…
Abstract
COVID-19 remains a public health emergency of international concern. Efforts at the global and national levels are being made to control its spread. The Nigerian Correctional Service is also proactive in the fight against the disease by organizing COVID-19 awareness training for correctional officers. We conducted a pre- and post-test assessment of COVID-19 knowledge among correctional officers in Enugu State Command to determine the impact of awareness training on their knowledge level. The study also assessed correctional officers’ attitude and preventive practices towards the disease.
The mean knowledge score was 19.34 out of 25, and the awareness training significantly improved the participants’ COVID-19 knowledge. We found a significant moderate, positive correlation between knowledge and attitude/practice, and a significantly higher knowledge level among those with higher educational qualifications.
Regular hand washing with soap and water (87.9%), wearing face masks (84.4%), and social distancing (83%) were practiced by the majority of the participants. The majority of the participants (53.2%) received COVID-19 information from multiple sources including the Nigeria Centre for Disease Control and the World Health Organization.
Details
Keywords
Anton Wiberg, Johan Persson and Johan Ölvander
This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM…
Abstract
Purpose
This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.
Design/methodology/approach
The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.
Findings
Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.
Originality/value
The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.
Details
Keywords
The purpose of this study is to examine the direct impact of social intelligence and collective self- efficacy on two components of service providers’ performance: extra-role…
Abstract
Purpose
The purpose of this study is to examine the direct impact of social intelligence and collective self- efficacy on two components of service providers’ performance: extra-role performance and intra-role one. The study also investigates the indirect effect of social intelligence on service providers’ performance and its components via the mediating role of collective self-efficacy.
Design/methodology/approach
This study was undertaken to develop a conceptual framework that integrates social intelligence, collective self-efficacy and service provider’s performance constructs in one framework. Data was collected from 220 physicians in the Egyptian governmental hospitals. Confirmatory factor analysis explored the latent structure of the research constructs. The current study used structural equation modelling to test the research model hypotheses.
Findings
The study finds that social intelligence was positively associated with service providers’ performance. The results also support the significant effect of social intelligence on the two main dimensions of service provider’s performance: extra-role (contextual) performance and intra-role (task) performance. Moreover, the results indicate that social intelligence competences provide a basis for collective self-efficacy and service providers’ performance for physicians in the Egyptian governmental hospitals.
Research limitations/implications
This study collected data based on a cross-sectional design, so further studies could test the theoretical model by using longitudinal studies’ data, which give the study results more accuracy of results and support generalizing the results. This study considers the synergistic effects between social intelligence and collective self-efficacy on service providers’ performance and sheds new light on bringing new drivers for developing extra- and intra-role dimensions of service provider performance in service literature.
Originality/value
This study is one of the first studies that integrate social intelligence and collective self-efficacy with service providers’ performance and its dimensions in one framework. This study contributes to knowledge by integrating the social exchange theory with the cognitive theory in one study.
Details