Search results

The purpose of this paper is to accurately capture the risks which are caused by each road user in time.

The authors proposed a novel risk assessment approach based on the multi-sensor fusion algorithm in the real traffic environment. Firstly, they proposed a novel detection-level fusion approach for multi-object perception in dense traffic environment based on evidence theory. This approach integrated four states of track life into a generic fusion framework to improve the performance of multi-object perception. The information of object type, position and velocity was accurately obtained. Then, they conducted several experiments in real dense traffic environment on highways and urban roads, which enabled them to propose a novel road traffic risk modeling approach based on the dynamic analysis of vehicles in a variety of driving scenarios. By analyzing the generation process of traffic risks between vehicles and the road environment, the equivalent forces of vehicle–vehicle and vehicle–road were presented and theoretically calculated. The prediction steering angle and trajectory were considered in the determination of traffic risk influence area.

The results of multi-object perception in the experiments showed that the proposed fusion approach achieved low false and missing tracking, and the road traffic risk was described as a field of equivalent force. The results extend the understanding of the traffic risk, which supported that the traffic risk from the front and back of the vehicle can be perceived in advance.

This approach integrated four states of track life into a generic fusion framework to improve the performance of multi-object perception. The information of object type, position and velocity was used to reduce erroneous data association between tracks and detections. Then, the authors conducted several experiments in real dense traffic environment on highways and urban roads, which enabled them to propose a novel road traffic risk modeling approach based on the dynamic analysis of vehicles in a variety of driving scenarios. By analyzing the generation process of traffic risks between vehicles and the road environment, the equivalent forces of vehicle–vehicle and vehicle–road were presented and theoretically calculated.

The purpose of this paper is to develop a proof-of-concept (POC) Forward Collision Warning (FWC) system for the motorcyclist, which determines a potential clash based on time-to-collision and trajectory of both the detected and ego vehicle (motorcycle).

This comes in three approaches. First, time-to-collision value is to be calculated based on low-cost camera video input. Second, the trajectory of the detected vehicle is predicted based on video data in the 2 D pixel coordinate. Third, the trajectory of the ego vehicle is predicted via the lean direction of the motorcycle from a low-cost inertial measurement unit sensor.

This encompasses a comprehensive Advanced FWC system which is an amalgamation of the three approaches mentioned above. First, to predict time-to-collision, nested Kalman filter and vehicle detection is used to convert image pixel matrix to relative distance, velocity and time-to-collision data. Next, for trajectory prediction of detected vehicles, a few algorithms were compared, and it was found that long short-term memory performs the best on the data set. The last finding is that to determine the leaning direction of the ego vehicle, it is better to use lean angle measurement compared to riding pattern classification.

The value of this paper is that it provides a POC FWC system that considers time-to-collision and trajectory of both detected and ego vehicle (motorcycle).

The paper aims to solve the problem of personnel intrusion identification within the limits of high-speed railways. It adopts the fusion method of millimeter wave radar and camera to improve the accuracy of object recognition in dark and harsh weather conditions.

This paper adopts the fusion strategy of radar and camera linkage to achieve focus amplification of long-distance targets and solves the problem of low illumination by laser light filling of the focus point. In order to improve the recognition effect, this paper adopts the YOLOv8 algorithm for multi-scale target recognition. In addition, for the image distortion caused by bad weather, this paper proposes a linkage and tracking fusion strategy to output the correct alarm results.

Simulated intrusion tests show that the proposed method can effectively detect human intrusion within 0–200 m during the day and night in sunny weather and can achieve more than 80% recognition accuracy for extreme severe weather conditions.

(1) The authors propose a personnel intrusion monitoring scheme based on the fusion of millimeter wave radar and camera, achieving all-weather intrusion monitoring; (2) The authors propose a new multi-level fusion algorithm based on linkage and tracking to achieve intrusion target monitoring under adverse weather conditions; (3) The authors have conducted a large number of innovative simulation experiments to verify the effectiveness of the method proposed in this article.

Automated driving systems (ADSs) are being developed to avoid human error and improve driving safety. However, limited focus has been given to the fallback behavior of automated vehicles, which act as a fail-safe mechanism to deal with safety issues resulting from sensor failure. Therefore, this study aims to establish a fallback control approach aimed at driving an automated vehicle to a safe parking lane under perceptive sensor malfunction.

Owing to an undetected area resulting from a front sensor malfunction, the proposed ADS first creates virtual vehicles to replace existing vehicles in the undetected area. Afterward, the virtual vehicles are assumed to perform the most hazardous driving behavior toward the host vehicle; an adaptive model predictive control algorithm is then presented to optimize the control task during the fallback procedure, avoiding potential collisions with surrounding vehicles. This fallback approach was tested in typical cases related to car-following and lane changes.

It is confirmed that the host vehicle avoid collision with the surrounding vehicles during the fallback procedure, revealing that the proposed method is effective for the test scenarios.

This study presents a model for the path-planning problem regarding an automated vehicle under perceptive sensor failure, and it proposes an original path-planning approach based on virtual vehicle scheme to improve the safety of an automated vehicle during a fallback procedure. This proposal gives a different view on the fallback safety problem from the normal strategy, in which the mode is switched to manual if a driver is available or the vehicle is instantly stopped.

The presentation of in-vehicle warnings information at risky driving scenarios is aimed to improve the collision avoidance ability of drivers. Existing studies have found that driver’s collision avoidance performance is affected by both warning information and driver’s workload. However, whether moderation and mediation effects exist among warning information, driver’s cognition, behavior and risky avoidance performance is unclear.

This purpose of this study is to examine whether the warning information type modifies the relationship between the forward collision risk and collision avoidance behavior. A driving simulator experiment was conducted with waring and command information.

Results of 30 participants indicated that command information improves collision avoidance behavior more than notification warning under the forward collision risky driving scenario. The primary reason for this is that collision avoidance behavior can be negatively affected by the forward collision risk. At the same time, command information can weaken this negative effect. Moreover, improved collision avoidance behavior can be achieved through increasing drivers’ mental workload.

The proposed model provides a comprehensive understanding of the factors influencing collision avoidance behavior, thus contributing to improved in-vehicle information system design.

The significant moderation effects evoke the fact that information types and mental workloads are critical in improving drivers’ collision avoidance ability. Through further calibration with larger sample size, the proposed structural model can be used to predict the effect of in-vehicle warnings in different risky driving scenarios.

In this paper, we present a new hybrid binary version of bat and enhanced particle swarm optimization algorithm in order to solve feature selection problems. The proposed algorithm is called Hybrid Binary Bat Enhanced Particle Swarm Optimization Algorithm (HBBEPSO). In the proposed HBBEPSO algorithm, we combine the bat algorithm with its capacity for echolocation helping explore the feature space and enhanced version of the particle swarm optimization with its ability to converge to the best global solution in the search space. In order to investigate the general performance of the proposed HBBEPSO algorithm, the proposed algorithm is compared with the original optimizers and other optimizers that have been used for feature selection in the past. A set of assessment indicators are used to evaluate and compare the different optimizers over 20 standard data sets obtained from the UCI repository. Results prove the ability of the proposed HBBEPSO algorithm to search the feature space for optimal feature combinations.

With the increasing requirements for intelligence in the field of aviation manufacturing, manual assembly can hardly adapt to the trend of future production. The purpose of this study is to realize the semi-automatic assembly of the movable airfoil by proposing a human-robot collaborative assembly strategy based on adaptive admittance control.

A logical judgment system for operating intentions is introduced in terms of different situations of the movements; hence, a human cognition-based adaptive admittance control method is developed to curb the damage of inertia; then virtual limit walls are raised on the periphery of the control model to ensure safety; finally, simulated and experimental comparisons with other admittance control methods are conducted to validate the proposed method.

The proposed method can save at least 28.8% of the time in the stopping phase which effectively compensates for inertia during the assembly process and has high robustness concerning data disturbances.

Due to the human-robot collaboration to achieve compliant assembly of movable airfoils can preserve human subjectivity while overcoming the physical limits of humans, which is of great significance to the investigation of intelligent aircraft assembly, the proposed method that reflects the user's naturalness and intuitiveness can not only enhance the stability and the flexibility of the manipulation, but also contribute to applications of industrial robots in the field of human-robot collaboration.

Deployment of deep neural networks on embedded devices is becoming increasingly popular because it can reduce latency and energy consumption for data communication. This paper aims to give out a method for deployment the deep neural networks on a quad-rotor aircraft for further expanding its application scope.

In this paper, a design scheme is proposed to implement the flight mission of the quad-rotor aircraft based on multi-sensor fusion. It integrates attitude acquisition module, global positioning system position acquisition module, optical flow sensor, ultrasonic sensor and Bluetooth communication module, etc. A 32-bit microcontroller is adopted as the main controller for the quad-rotor aircraft. To make the quad-rotor aircraft be more intelligent, the study also proposes a method to deploy the pre-trained deep neural networks model on the microcontroller based on the software packages of the RT-Thread internet of things operating system.

This design provides a simple and efficient design scheme to further integrate artificial intelligence (AI) algorithm for the control system design of quad-rotor aircraft.

This method provides an application example and a design reference for the implementation of AI algorithms on unmanned aerial vehicle or terminal robots.

Joule heating effect is a pervasive phenomenon in electro-osmotic flow because of the applied electric field and fluid electrical resistivity across the microchannels. Its effect in electro-osmotic flow field is an important mechanism to control the flow inside the microchannels and it includes numerous applications.

This research article details the numerical investigation on alterations in the profile of stream wise velocity of simple Couette-electroosmotic flow and pressure driven electro-osmotic Couette flow by the dynamic viscosity variations happened due to the Joule heating effect throughout the dielectric fluid usually observed in various microfluidic devices.

The advantages of the Joule heating effect are not only to control the velocity in microchannels but also to act as an active method to enhance the mixing efficiency. The results of numerical investigations reveal that the thermal field due to Joule heating effect causes considerable variation of dynamic viscosity across the microchannel to initiate a shear flow when EDL (Electrical Double Layer) thickness is increased and is being varied across the channel.

This research work suggest how joule heating can be used as en effective mechanism for flow control in microfluidic devices.