Search results

Low back disorders are more predominant among construction trade workers than their counterparts in other industry sectors. Floor layers are among the top artisans that are severely affected by low back disorders. Exoskeletons are increasingly being perceived as ergonomic solutions. This study aims to compare the efficacy of passive and active back-support exoskeletons by measuring range of motion, perceived discomfort, usability, perceived rate of exertion and cognitive load during a simulated flooring task experiment.

In this study eight participants were engaged in a repetitive timber flooring task performed with passive and active back-support exoskeletons. Subjective and objective data were collected to assess the risks associated with using both exoskeletons. Descriptive statistics were used for analysis. Scheirer-Ray-Hare test and Wilcoxon signed-rank test were adopted to compare the exoskeleton conditions.

The results show no significant differences in the range of motion (except for a lifting cycle), perceived level of discomfort and perceived level of exertion between the two exoskeletons. Significant difference in overall cognitive load was observed. The usability results show that the active back-support exoskeleton made task execution easier with less restriction on movement.

The flooring task is simulated in a laboratory environment with only eight male participants.

This study contributes to the scarce body of knowledge on the usage comparison of passive and active exoskeletons for construction work.

Set-based design (SBD) is a lean tool widely adopted for improving design processes and providing value maximization to clients. The purpose of this paper is to present the development and testing of a lean simulation game that incorporated point-based and SBD principles. The objective of the game was to enhance learning of lean design management among construction students.

After a thorough and comprehensive literature review consisting of secondary data in journal papers, books, thesis references and primary data in the form of interviews with lean practitioners, the simulation game prototype was developed. The testing of the game was carried out with a study group. Data were collected during the gameplay with the help of a questionnaire survey on a confidence scale and Likert scale and assessed using the Wilcoxon signed-rank test, histogram, one-sample t-test and false discovery rate (Benjamini–Hochberg) correction method.

The data collected both pre- and post-simulation showed an increase in average confidence in understanding from 3.33 to 3.89, a 16.7% rise. The data was further interpreted by using Wilcoxon signed-rank test, indicating that the post-simulation learning experience was significantly better than the pre-simulation one. Promising positive results were obtained for the questions on game design, engagement and understanding of point-based design and SBD concepts.

The simulation game helps bridge the gap between knowledge building and real-life by effectively imitating the process. The game facilitates a dynamic and critical approach toward developing new educational simulation games and their successful incorporation in propagating lean principles in the construction industry.

COVID-19 continues to spread, and cause increasing deaths. Physicians diagnose COVID-19 using not only real-time polymerase chain reaction but also the computed tomography (CT) and chest x-ray (CXR) modalities, depending on the stage of infection. However, with so many patients and so few doctors, it has become difficult to keep abreast of the disease. Deep learning models have been developed in order to assist in this respect, and vision transformers are currently state-of-the-art methods, but most techniques currently focus only on one modality (CXR).

This work aims to leverage the benefits of both CT and CXR to improve COVID-19 diagnosis. This paper studies the differences between using convolutional MobileNetV2, ViT DeiT and Swin Transformer models when training from scratch and pretraining on the MedNIST medical dataset rather than the ImageNet dataset of natural images. The comparison is made by reporting six performance metrics, the Scott–Knott Effect Size Difference, Wilcoxon statistical test and the Borda Count method. We also use the Grad-CAM algorithm to study the model's interpretability. Finally, the model's robustness is tested by evaluating it on Gaussian noised images.

Although pretrained MobileNetV2 was the best model in terms of performance, the best model in terms of performance, interpretability, and robustness to noise is the trained from scratch Swin Transformer using the CXR (accuracy = 93.21 per cent) and CT (accuracy = 94.14 per cent) modalities.

Models compared are pretrained on MedNIST and leverage both the CT and CXR modalities.

Within the context of the nonprofit resiliency framework, the authors use nonprofit functional expenses and contribution revenue to explore how the COVID-19 pandemic affected the ability of nonprofits in different subsectors to carry out their mission, as well as their ability to “pivot” fundraising strategies to integrate social media and digital engagement.

The authors use IRS form 990 return data for organizations with a year-end return that includes at least six months of COVID-19 impact (“Wave 1 Effects” period) and also have a prior-year return (“Business as Usual” period). The authors use Wilcoxon signed rank tests to examine whether there are differences in our variables of interest between the two periods.

While the majority of nonprofits in most subsectors experienced a significant decrease in program spending, fundraising spending and fundraising efficiency ratios between the two time periods, the authors found variation in the change in contribution revenue and fundraising ratio between the two periods between subsectors. The authors also find that the percentage of nonprofits able to “pivot” their fundraising strategies varies by subsector between 13.33 and 31.23%.

This paper provides new information regarding the pandemic's initial effect on nonprofit program and fundraising spending, the related contribution revenue and the ability of nonprofits to “pivot” fundraising to remote strategies. The authors propose a more robust fundraising efficiency measure and a new measure indicating a nonprofit's “ability to pivot” their fundraising strategy. The authors encourage future researchers to conduct further longitudinal studies to understand how these effects may continue or change.

The purpose of this paper is to use Bourdieu’s Theory of Capital–Field–Habitus to explore how refugees, asylum seekers and migrants accumulate and mobilise social, cultural, symbolic and economic capital to find meaningful work in the Australian construction industry.

The paper reports the results of a survey of refugees, asylum seekers and migrants who have either successfully or unsuccessfully searched for employment in the Australian construction industry.

The findings dispel widely held negative stereotypes of about this group by describing a highly capable workforce which could address significant skills shortages in the industry, while concurrently diversifying the workforce. However, it is found that refugees, asylum seekers and migrants face considerable barriers to finding meaningful employment in the construction industry. In circumventing these barriers, education institutions, charities and community-based organisations play an especially important role, alongside friends and family networks. They do this by helping refugees, asylum seekers and migrants accumulate and deploy the necessary capital to secure meaningful work in the construction industry. Disappointingly, it is also found that the construction industry does little to help facilitate capital accumulation and deployment for this group, despite the urgent need to address diversity and critical skills shortages.

Employing Pierre Bourdieu’s Theory of Capital–Field–Habitus, the findings make a number of new theoretical and practical contributions to the limited body of international research relating to the employment of refugees, asylum seekers and migrant workers in the construction. The results are important because meaningful employment is widely accepted to be the single most factor in the successful integration of refugees, asylum seekers and migrants into a host society and the construction industry represents an important source of potential employment for them.

This study proposes an analysis of the performance of companies that have assumed the responsibility of facilitating the digitalization of economic activities. Because of their potential to accelerate digitization, these companies have been financially supported. The monitoring of the performances recorded by these companies, including the evaluation of the impact of different determining factors, meets both the needs of the financiers (concerned with the evaluation of the efficiency of the use of nonreimbursable financing) and the needs of continuous improvement of the activities of the companies in the field.

The study assesses performance dynamics and the impact of its determinants. The model allows achieving a simplified vision of performance and its determinants, supporting decision-makers in the management process. The construction of an estimation model based on the multiple regression method was considered. Robustness tests were performed on the results, using parametric and nonparametric tests.

The results of the analysis at the level of the extended sample indicated that, during the analyzed period, the economic and commercial performances decreased, and significant influences in this respect include the financing structure, sales dynamics and volume of receivables. The analysis at the level of the restricted sample confirmed these interdependencies and provided additional evidence of the impact of other determinants.

The study contributes both to performance research and to the assessment of the prospects for accelerating digitalization in support of economic activities. Since the empirical research was carried out on a sample of Romanian companies that provide services in information technology, which accessed nonreimbursable financing, the representativeness of the results is limited to this sector. For the analyzed sample, the study provides support for improving performance.

The results of the study prove to be useful from a microeconomic and macroeconomic perspective as well, as they provide evidence on the performance of companies that have implemented information and communication technology (ICT) projects and on the efficiency of the use of non-reimbursable funding dedicated to business support.

The study fills the literature gap regarding the performance of companies that have developed ICT projects and received grant funding for the implementation of these projects. The literature review indicated that there are few studies conducted on these companies, which did not include Romanian companies.

The ultimate objective of this study is to compare the impact of face-to-face and online flipped learning on students' academic achievements and their perspectives on learning and teaching, offering valuable insights to the field.

The study utilized a quasi-experimental research method that involves pre-test and post-test control groups.

The results indicated that face-to-face and online flipped learning positively impacted learning, with comparable contributions to academic achievement. However, we found that online flipped learning did not affect students' beliefs about learning and teaching, while face-to-face flipped learning positively influenced them.

As distance learning becomes increasingly important in our modern era, this research aims to explore the use of active learning methods, including discussion, writing, animation, drawing, association, analysis, knowledge measurement and games, in virtual learning environments, such as online flipped learning. The study seeks to enhance the existing literature on the impact of face-to-face and online flipped learning models on student success. Additionally, it aims to address a significant gap in the literature by determining the effect of these models on students' epistemological and pedagogical beliefs, which can impact their motivation, learning outcomes, academic achievements and decision-making processes.

Despite endeavors to alleviate construction and demolition waste and the indications that the process of deconstruction has the potential to steer waste reduction initiatives, there has not been a progressive increase in the adoption of Design for Deconstruction (DfD) in the global south, especially Ghana. This paper aims to identify and analyze the barriers to implementing DfD in developing countries.

A structured questionnaire survey was used to solicit the views of 240 design professionals in the Ghanaian construction industry (GCI). The questionnaire was developed by reviewing pertinent literature and complemented with a pilot review. Data were analyzed using descriptive and nonparametric statistics.

The findings revealed ten (10) significant impediments to implementing DfD within the construction industries in developing economies. These impediments revolve around cost, legal matters, storage, incentive and design-related matters. Key among these barriers is “For recovered materials, there are little performance guarantees,” “The absence of strict regulations regarding design for deconstruction,” “Lack of a large market enough for components that have been recovered,” “The need for building codes that address how to design with reused materials” and “Lack of effective design for deconstruction tools.”

The results of this research shed light on a relatively unexplored area within the construction sector, particularly in a developing country like Ghana. Furthermore, to the best of the authors’ knowledge, the study contributes fresh and supplementary knowledge and perspectives regarding the challenges in implementing DfD practices.

The decisions of contractors could impact the reduction of construction carbon footprint. These decisions are linked to the belief of contractors which equally affects how they behave while delivering projects. This study aims to investigate the behavioural tendencies of contractors that could lead to carbon minimisation during the execution of construction projects.

An industry survey was performed amongst 41 UK construction professionals. Spearman’s correlation and factor analysis were used to analyse the data.

The result of the Spearman’s correlation gave rise to 14 contractors’ carbon reduction behaviour (CCRB) variables and their factor analysis yielded two distinct factors, namely, contractors’ consummate carbon reduction behaviour and contractors’ pragmatic carbon reduction behaviour. The findings suggest that in the UK, contractors are willing to take voluntary practical steps to decrease the carbon footprint of construction projects.

This finding might be unexpected to construction stakeholders, especially construction clients who may believe that infusing strict carbon reduction obligations in contracts is sufficient in nudging contractors to lessen the carbon impact of projects.

The study attempted to quantitatively derive CCRB, thereby extending the breadth of knowledge in the construction carbon reduction domain.

Research internships are integral components of undergraduate programs that nurture students' skill sets. However, the current trend of these internships adopting a direct apprenticeship model, often termed “cookbook” laboratory sessions, falls short of cultivating 21st-century skills. Therefore, this study proposes an innovative Outcomes-directed Research Internship Model (ODRIM) designed to enhance research competencies.

This study introduces a pioneering research internship model by integrating the course-based undergraduate research experience (CURE) framework with principles rooted in outcomes-based education (OBE). To evaluate its effectiveness and compare it with traditional research internship models (TRIMs), a two-group pretest-posttest design was utilized. Statistical analysis was performed on data collected from 66 participants to assess their research competencies.

The results revealed a significant positive difference in utilizing the tailored innovative ODRIM track (pre-mean = 17.525, post-mean = 19.875; p = 0.009) compared to the TRIM track (pre-mean = 19.769, post-mean = 19.615; p = 1.000) in enhancing overall student research competency. Specifically, this innovative internship model notably enhanced students’ abilities in conducting research, showcasing technical skills, collaborating within teams, and disseminating research outcomes, encompassing the composition of research articles and reports.

This tailored approach to the “Research Internship” encourages a harmonious blend of hands-on, inquiry-based learning and clear, measurable learning goals. It not only cultivates an immersive and thorough research experience to improve students’ research competencies, but also guarantees a concentrated alignment with predetermined research learning objectives.