Search results

The purpose of this study is to optimize and improve conventional welding using EMF assisted technology. Current industrial production has put forward higher requirements for welding technology, so the optimization and improvement of traditional welding methods become urgent needs.

External magnetic field assisted welding is an emerging technology in recent years, acting in a non-contact manner on the welding. The action of electromagnetic forces on the arc plasma leads to significant changes in the arc behavior, which affects the droplet transfer and molten pool formation and ultimately improve the weld seam formation and joint quality.

In this paper, different types of external magnetic fields are analyzed and summarized, which mainly include external transverse magnetic field, external longitudinal magnetic field and external cusp magnetic field. The research progress of welding behavior under the effect of external magnetic field is described, including the effect of external magnetic field on arc morphology, droplet transfer and weld seam formation law.

However, due to the extremely complex physical processes under the action of the external magnetic field, the mechanism of physical fields such as heat, force and electromagnetism in the welding has not been thoroughly analyzed, in-depth theoretical and numerical studies become urgent.

Wire arc additive manufacturing (WAAM) is one of the most researched and fastest-growing AM technique because of its capability to produce larger components with medium complexity. In recent times, the use of WAAM process has been increased because of its ability to produce complex components economically when compared with other AM techniques. The purpose of this study is to investigate the capabilities of wire arc additive manufacturing (WAAM), which has emerged as a recognized method for fabricating larger components with complex geometries.

This paper provides a review of process parameters for optimizing and analyzing mechanical properties, hardness, microstructure and corrosion behavior achieved through various WAAM-based techniques.

Limited analysis exists regarding the mechanical properties of various orientations of Inconel 625 alloy. Moreover, there is a lack of studies concerning the corrosion behavior of Inconel 625 alloy fabricated using WAAM.

The review identifies that the formation of intermetallic phases reduces the desirability of mechanical properties and corrosion resistance of WAAM-fabricated Inconel 625 alloy. Additionally, the study reported notable results obtained by various research studies and the improvements to be achieved in the future.

This study aims to develop a holistic method that integrates finite element modeling, machine learning, and experimental validation to propose processing windows for optimizing the laser powder bed fusion (LPBF) process specific to the Al-357 alloy.

Validation of a 3D heat transfer simulation model was conducted to forecast melt pool dimensions, involving variations in laser power, laser scanning speed, powder bed thickness (PBT) and powder bed pre-heating (PHB). Using the validated model, a data set was compiled to establish a back-propagation-based machine learning capable of predicting melt pool dimensional ratios indicative of printing defects.

The study revealed that, apart from process parameters, PBT and PHB significantly influenced defect formation. Elevated PHBs were identified as contributors to increased lack of fusion and keyhole defects. Optimal combinations were pinpointed, such as 30.0 µm PBT with 90.0 and 120.0 °C PHBs and 50.0 µm PBT with 120.0 °C PHB.

The integrated process mapping approach showcased the potential to expedite the qualification of LPBF parameters for Al-357 alloy by minimizing the need for iterative physical testing.

For the purpose of saving nickel, this study aims to develop new duplex stainless steel cored wires suitable for wire arc additive manufacturing (WAAM) with the addition of nitrogen.

The effect of nitrogen content on the microstructure and mechanical properties of the thin-walled deposits is investigated in detail.

The microstructure of thin-walled deposits mainly consists of austenite, ferrite and secondary austenite. With increasing nitrogen content, the austenite in the deposited metals increases. The austenite proportion in the bottom region is more than that in the top region of the deposited metals. The χ phase is randomly distributed at the grain boundaries and within ferrite. The σ phase is mainly precipitated at ferrite and austenite grain boundaries. With increasing nitrogen content, the tensile strength of the deposited metals increases, but the impact toughness of the deposited metals deteriorates.

This study proposes new duplex stainless steel cored wires for WAAM, which realizes the objective of saving nickel.

Material selection, driven by wide and often conflicting objectives, is an important, sometimes difficult problem in material engineering. In this context, multi-criteria decision-making (MCDM) methodologies are effective. An approach of MCDM is needed to cater to criteria of material assortment simultaneously. More firms are now concerned about increasing their productivity using mathematical tools. To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material. In addition, by using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), the inherent ambiguities of decision-makers in paired evaluations are considered in this research. It goes on to construct a mathematical bi-objective model for determining the best item to purchase.

The entropy perspective is implemented in this paper to evaluate the weight parameters, while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system. The intermediate pipes are used to join the components of the exhaust systems. The materials usually used to manufacture intermediate pipe are SUS 436LM, SUS 430, SUS 304, SUS 436L, SUH 409 L, SUS 441 L and SUS 439L. These seven materials are evaluated based on tensile strength (TS), hardness (H), elongation (E), yield strength (YS) and cost (C). A hybrid methodology combining entropy-based criteria weighting, with the TOPSIS for alternative ranking, is pursued to identify the optimal design material for an engineered application in this paper. This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes. After that, the authors searched for and considered eight materials and evaluated them on the following five criteria: (1) TS, (2) YS, (3) H, (4) E and (5) C. The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes, on their performance and on the cost. In this structure, the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment. This essentially measures the quantity of information each criterion contribution, indicating the relative importance of these criteria better. Subsequently, the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative. The results show that SUS 309, SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.

The material matrix of the decision presented in Table 3 was normalized through Equation 5, as shown in Table 5, and the matrix was multiplied with weighting criteria ß_j. The obtained weighted normalized matrix V_ij is presented in Table 6. However, the ideal, worst and best value was ascertained by employing Equation 7. This study is based on the selection of material for the development of intermediate pipe using MCDM, and it involves four basic stages, i.e. method of translation criteria, screening process, method of ranking and search for methods. The selection was done through the TOPSIS method, and the criteria weight was obtained by the entropy method. The result showed that the top three materials are SUS 309, SUS 432L and SUS 436 LM, respectively. For the future work, it is suggested to select more alternatives and criteria. The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality (ELECTRE), Decision-Making Trial and Evaluation Laboratory (DEMATEL) and Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE).

The results provide important conclusions for material selection in this targeted application, verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.