Search results

The paper aims to study the constraint solutions of the periodic coupled operator matrix equations by the biconjugate residual algorithm. The new algorithm can solve a lot of constraint solutions including Hamiltonian solutions and symmetric solutions, as special cases. At the end of this paper, the new algorithm is applied to the pole assignment problem.

When the studied periodic coupled operator matrix equations are consistent, it is proved that constraint solutions can converge to exact solutions. It is demonstrated that the solutions of the equations can be obtained by the new algorithm with any arbitrary initial matrices without rounding error in a finite number of iterative steps. In addition, the least norm-constrained solutions can also be calculated by selecting any initial matrices when the equations of the periodic coupled operator matrix are inconsistent.

Numerical examples show that compared with some existing algorithms, the proposed method has higher convergence efficiency because less data are used in each iteration and the data is sufficient to complete an update. It not only has the best convergence accuracy but also requires the least running time for iteration, which greatly saves memory space.

Compared with previous algorithms, the main feature of this algorithm is that it can synthesize these equations together to get a coupled operator matrix equation. Although the equation of this paper contains multiple submatrix equations, the algorithm in this paper only needs to use the information of one submatrix equation in the equation of this paper in each iteration so that different constraint solutions of different (coupled) matrix equations can be studied for this class of equations. However, previous articles need to iterate on a specific constraint solution of a matrix equation separately.

To provide high torques needed to move a robot’s links, electric actuators are followed by a transmission system with a high transmission rate. For instance, gear ratios of 100:1 are often used in the joints of a robotic manipulator. This results into an actuator with large mechanical impedance (also known as nonback-drivable actuator). This in turn generates high contact forces when collision of the robotic mechanism occur and can cause humans’ injury. Another disadvantage of electric actuators is that they can exhibit overheating when constant torques have to be provided. Comparing to electric actuators, pneumatic actuators have promising properties for robotic applications, due to their low weight, simple mechanical design, low cost and good power-to-weight ratio. Electropneumatically actuated robots usually have better friction properties. Moreover, because of low mechanical impedance, pneumatic robots can provide moderate interaction forces which is important for robotic surgery and rehabilitation tasks. Pneumatic actuators are also well suited for exoskeleton robots. Actuation in exoskeletons should have a fast and accurate response. While electric motors come against high mechanical impedance and the risk of causing injuries, pneumatic actuators exhibit forces and torques which stay within moderate variation ranges. Besides, unlike direct current electric motors, pneumatic actuators have an improved weight-to-power ratio and avoid overheating problems.

The aim of this paper is to analyze a nonlinear optimal control method for electropneumatically actuated robots. A two-link robotic exoskeleton with electropneumatic actuators is considered as a case study. The associated nonlinear and multivariable state-space model is formulated and its differential flatness properties are proven. The dynamic model of the electropneumatic robot is linearized at each sampling instance with the use of first-order Taylor series expansion and through the computation of the associated Jacobian matrices. Within each sampling period, the time-varying linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. An H-infinity controller is designed for the linearized model of the robot aiming at solving the related optimal control problem under model uncertainties and external perturbations. An algebraic Riccati equation is solved at each time-step of the control method to obtain the stabilizing feedback gains of the H-infinity controller. Through Lyapunov stability analysis, it is proven that the robot’s control scheme satisfies the H-infinity tracking performance conditions which indicate the robustness properties of the control method. Moreover, global asymptotic stability is proven for the control loop. The method achieves fast convergence of the robot’s state variables to the associated reference trajectories, and despite strong nonlinearities in the robot’s dynamics, it keeps moderate the variations of the control inputs.

In this paper, a novel solution has been proposed for the nonlinear optimal control problem of robotic exoskeletons with electropneumatic actuators. As a case study, the dynamic model of a two-link lower-limb robotic exoskeleton with electropneumatic actuators has been considered. The dynamic model of this robotic system undergoes first approximate linearization at each iteration of the control algorithm around a temporary operating point. Within each sampling period, this linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. The linearization process relies on first-order Taylor series expansion and on the computation of the associated Jacobian matrices. The modeling error which is due to the truncation of higher-order terms from the Taylor series is considered to be a perturbation which is asymptotically compensated by the robustness of the control algorithm. To stabilize the dynamics of the electropneumatically actuated robot and to achieve precise tracking of reference setpoints, an H-infinity (optimal) feedback controller is designed. Actually, the proposed H-infinity controller for the model of the two-link electropneumatically actuated exoskeleton achieves the solution of the associated optimal control problem under model uncertainty and external disturbances. This controller implements a min-max differential game taking place between: (i) the control inputs which try to minimize a cost function which comprises a quadratic term of the state vector’s tracking error and (ii) the model uncertainty and perturbation inputs which try to maximize this cost function. To select the stabilizing feedback gains of this H-infinity controller, an algebraic Riccati equation is being repetitively solved at each time-step of the control method. The global stability properties of the H-infinity control scheme are proven through Lyapunov analysis.

Pneumatic actuators are characterized by high nonlinearities which are due to air compressibility, thermodynamics and valves behavior and thus pneumatic robots require elaborated nonlinear control schemes to ensure their fast and precise positioning. Among the control methods which have been applied to pneumatic robots, one can distinguish differential geometric approaches (Lie algebra-based control, differential flatness theory-based control, nonlinear model predictive control [NMPC], sliding-mode control, backstepping control and multiple models-based fuzzy control). Treating nonlinearities and fault tolerance issues in the control problem of robotic manipulators with electropneumatic actuators has been a nontrivial task.

The novelty of the proposed control method is outlined as follows: preceding results on the use of H-infinity control to nonlinear dynamical systems were limited to the case of affine-in-the-input systems with drift-only dynamics. These results considered that the control inputs gain matrix is not dependent on the values of the system’s state vector. Moreover, in these approaches the linearization was performed around points of the desirable trajectory, whereas in the present paper’s control method the linearization points are related with the value of the state vector at each sampling instance as well as with the last sampled value of the control inputs vector. The Riccati equation which has been proposed for computing the feedback gains of the controller is novel, so is the presented global stability proof through Lyapunov analysis. This paper’s scientific contribution is summarized as follows: (i) the presented nonlinear optimal control method has improved or equally satisfactory performance when compared against other nonlinear control schemes that one can consider for the dynamic model of robots with electropneumatic actuators (such as Lie algebra-based control, differential flatness theory-based control, nonlinear model-based predictive control, sliding-mode control and backstepping control), (ii) it achieves fast and accurate tracking of all reference setpoints, (iii) despite strong nonlinearities in the dynamic model of the robot, it keeps moderate the variations of the control inputs and (iv) unlike the aforementioned alternative control approaches, this paper’s method is the only one that achieves solution of the optimal control problem for electropneumatic robots.

The use of electropneumatic actuation in robots exhibits certain advantages. These can be the improved weight-to-power ratio, the lower mechanical impedance and the avoidance of overheating. At the same time, precise positioning and accurate execution of tasks by electropneumatic robots requires the application of elaborated nonlinear control methods. In this paper, a new nonlinear optimal control method has been developed for electropneumatically actuated robots and has been specifically applied to the dynamic model of a two-link robotic exoskeleton. The benefit from using this paper’s results in industrial and biomedical applications is apparent.

A comparison of the proposed nonlinear optimal (H-infinity) control method against other linear and nonlinear control schemes for electropneumatically actuated robots shows the following: (1) Unlike global linearization-based control approaches, such as Lie algebra-based control and differential flatness theory-based control, the optimal control approach does not rely on complicated transformations (diffeomorphisms) of the system’s state variables. Besides, the computed control inputs are applied directly on the initial nonlinear model of the electropneumatic robot and not on its linearized equivalent. The inverse transformations which are met in global linearization-based control are avoided and consequently one does not come against the related singularity problems. (2) Unlike model predictive control (MPC) and NMPC, the proposed control method is of proven global stability. It is known that MPC is a linear control approach that if applied to the nonlinear dynamics of the electropneumatic robot, the stability of the control loop will be lost. Besides, in NMPC the convergence of its iterative search for an optimum depends on initialization and parameter values selection and consequently the global stability of this control method cannot be always assured. (3) Unlike sliding-mode control and backstepping control, the proposed optimal control method does not require the state-space description of the system to be found in a specific form. About sliding-mode control, it is known that when the controlled system is not found in the input-output linearized form the definition of the sliding surface can be an intuitive procedure. About backstepping control, it is known that it cannot be directly applied to a dynamical system if the related state-space model is not found in the triangular (backstepping integral) form. (4) Unlike PID control, the proposed nonlinear optimal control method is of proven global stability, the selection of the controller’s parameters does not rely on a heuristic tuning procedure, and the stability of the control loop is assured in the case of changes of operating points. (5) Unlike multiple local models-based control, the nonlinear optimal control method uses only one linearization point and needs the solution of only one Riccati equation so as to compute the stabilizing feedback gains of the controller. Consequently, in terms of computation load the proposed control method for the electropneumatic actuator’s dynamics is much more efficient.

This study investigates the flow and heat transfer in a magnetohydrodynamic (MHD) ternary hybrid nanofluid (HNF), considering the effects of viscous dissipation and radiation.

The transport equations are transformed into nondimensional partial differential equations. The local nonsimilarity (LNS) technique is implemented to truncate nonsimilar dimensionless system. The LNS truncated equation can be treated as ordinary differential equations. The numerical results of the equation are accomplished through the implementation of the bvp4c solver, which leverages the fourth-order three-stage Lobatto IIIa formula as a finite difference scheme.

The findings of a comparative investigation carried out under diverse physical limitations demonstrate that ternary HNFs exhibit remarkably elevated thermal efficiency in contrast to conventional nanofluids.

The LNS approach (Mahesh et al., 2023; Khan et al., 20223; Farooq et al., 2023) that we have proposed is not currently being used to clarify the dynamical issue of HNF via porous media. The LNS method, in conjunction with the bvp4c up to its second truncation level, yields numerical solutions to nonlinear-coupled PDEs. Relevant results of the topic at hand, obtained by adjusting the appropriate parameters, are explained and shown visually via tables and diagrams.

The purpose of this study is to develop a novel general mathematical model to find the optimal product mix of commercial graphite products, which has a complex production process with alternative sub-processes in the graphite mining production process.

The network optimization was adopted to model the complex graphite mining production process through the optimal allocation of raw graphite, byproducts, and saleable products with comparable sub-processes, which has different processing capacities and costs. The model was tested on a selected graphite manufacturing company, and the optimal graphite product mix was determined through the selection of the optimal production process. In addition, sensitivity and scenario analyses were carried out to accommodate uncertainties and to facilitate further managerial decisions.

The selected graphite mining company mines approximately 400 metric tons of raw graphite per month to produce ten types of graphite products. According to the optimum solution obtained, the company should produce only six graphite products to maximize its total profit. In addition, the study demonstrated how to reveal optimum managerial decisions based on optimum solutions.

This study has made a significant contribution to the graphite manufacturing industry by modeling the complex graphite mining production process with a network optimization technique that has yet to be addressed at this level of detail. The sensitivity and scenario analyses support for further managerial decisions.

The purpose of the present work is to improve the industry performance by identifying and quantifying the risks faced by the Indian pharmaceutical industry (IPI). The risk values for the prominent risks and overall industry are determined based on the four risk parameters, which would help determine the most contributive risks for mitigation.

An extensive literature survey was done to identify the risks, which were also validated by industry experts. The finalized risks were then evaluated using the fuzzy synthetic evaluation (FSE) method, which is the most suitable approach for the risk assessment with parameters having a set of different risk levels.

The three most contributive sub-risks are counterfeit drugs, demand fluctuations and loss of customers due to partners' poor service performance, while the main risks obtained are demand, financial and logistics. Also, the overall risk value indicates that the industry faces medium to high risk.

The study identifies the critical risks which need to be mitigated for an efficient industry. The industry is most vulnerable to the demand risk category. Therefore, the managers should minimize this risk by mitigating its sub-risks, like demand fluctuations, bullwhip effect, etc. Another critical sub-risk, the counterfeit risk, should be managed by adopting advanced technologies like blockchain, artificial intelligence, etc.

There is insufficient literature focusing on risk quantification. Therefore, this work addresses this gap and obtains the industry's most critical risks. It also discusses suitable mitigation strategies for better industry performance.

This study aims to derive a novel spatial numerical method based on multidimensional local Taylor series representations for solving high-order advection-diffusion (AD) equations.

The parabolic AD equations are reduced to the nonhomogeneous elliptic system of partial differential equations by utilizing the Chebyshev spectral collocation method (ChSCM) in the temporal variable. The implicit-explicit local differential transform method (IELDTM) is constructed over two- and three-dimensional meshes using continuity equations of the neighbor representations with either explicit or implicit forms in related directions. The IELDTM yields an overdetermined or underdetermined system of algebraic equations solved in the least square sense.

The IELDTM has proven to have excellent convergence properties by experimentally illustrating both h-refinement and p-refinement outcomes. A distinctive feature of the IELDTM over the existing numerical techniques is optimizing the local spatial degrees of freedom. It has been proven that the IELDTM provides more accurate results with far fewer degrees of freedom than the finite difference, finite element and spectral methods.

This study shows the derivation, applicability and performance of the IELDTM for solving 2D and 3D advection-diffusion equations. It has been demonstrated that the IELDTM can be a competitive numerical method for addressing high-space dimensional-parabolic partial differential equations (PDEs) arising in various fields of science and engineering. The novel ChSCM-IELDTM hybridization has been proven to have distinct advantages, such as continuous utilization of time integration and optimized formulation of spatial approximations. Furthermore, the novel ChSCM-IELDTM hybridization can be adapted to address various other types of PDEs by modifying the theoretical derivation accordingly.

One of the challenges encountered in the design of guided projectiles is their prohibitive cost. To diminish it, an appropriate avenue many researchers have explored is the use of the non-actuator method for guiding the projectile to the target. In this method, biologically inspired by the flying concept of the single-winged seed, for instance, that of maple and ash trees, the projectile undergoes a helical motion to scan the region and meet the target in the descent phase. Indeed, the projectile is a decelerator device based on the autorotation flight while it attempts to resemble the seed’s motion using two wings of different spans. There exists a wealth of studies on the stability of the decelerators (e.g. the mono-wing, samara and pararotor), but all of them have assumed the body (exclusive of the wing) to be symmetric and paid no particular attention to the scanning quality of the region. In practice, however, the non-actuator-guided projectiles are asymmetric owing to the presence of detection sensors. This paper aims to present an analytical solution for stability analysis of asymmetric decelerators and apprise the effects of design parameters to improve the scanning quality.

The approach of this study is to develop a theoretical model consisting of Euler equations and apply a set of non-dimensionalized equations to reduce the number of involved parameters. The obtained governing equations are readily applicable to other decelerator devices, such as the mono-wing, samara and pararotor.

The results show that the stability of the body can be preserved under certain conditions. Moreover, pertinent conclusions are outlined on the sensitivity of flight behavior to the variation of design parameters.

The analytical solution and sensitivity analysis presented here can efficiently reduce the design cost of the asymmetric decelerator.

The purpose of this study is to analyze the two-dimensional blood flow in the artery slant from the axis at an angle with mild stenosis under the joint effects of the electro-osmotic, magnetic field, chemical reaction and porosity using a new analytical method. In addition, the mathematical model presented by the researchers Tripathi and Sharma (2018c) was successfully developed by adding the effect of electro-osmosis and studying the impact of the new addition in the developed model on blood flow.

A new analytical method was used to find the analytical approximate solutions of two-dimensional blood flow in artery slant from the axis at an angle with mild stenosis. This technique is based on integrating the Akbari-Ganji and the homotopy perturbation methods.

The results of axial velocity, concentration, temperature and the wall shear stress for blood flow were analyzed in the cases of the absence and presence of electro-osmosis. Furthermore, in these two states of electro-osmosis, a contour plot was created to show the difference in the profile of velocity to the flow of blood when the magnetic field was increased and the altitude of stenosis was increased. The results showed that the new technique is effective and has high accuracy to determine the analytical approximate solutions of two-dimensional blood flow in artery slant from the axis at an angle with mild stenosis. The validity, utility and necessity of the new method were illustrated from the graphs of the new solutions; in addition, there is an excellent agreement with the results of previous studies.

This paper focuses on developing the mathematical model which was presented by the researchers Tripathi and Sharma (2018c), by adding the effect of the electro-osmosis to it, which has been successfully developed. According to the authors’ modest information, the new system has not been studied before. This current problem is solved by using an innovative approach known as the Akbari-Ganji homotopy perturbation method (AGHPM) which has not been used before in two cases: the presence and absence of the effect of electro-osmosis. This new technique afford new with effective and has high accuracy results. Furthermore, the new study (i.e. adding effect of electro-osmosis) with the applications of (variable viscosity, magnetic field, chemical reaction and porosity) illustrated the importance of applying electro-osmosis and how doctors can benefit from it during surgeries through proper use.

A semiparametric stochastic frontier model is proposed for panel data, incorporating several flexible features. First, a constant elasticity of substitution (CES) production frontier is considered without log-transformation to prevent induced non-negligible estimation bias. Second, the model flexibility is improved via semiparameterization, where the technology is an unknown function of a set of environment variables. The technology function accounts for latent heterogeneity across individual units, which can be freely correlated with inputs, environment variables, and/or inefficiency determinants. Furthermore, the technology function incorporates a single-index structure to circumvent the curse of dimensionality. Third, distributional assumptions are eschewed on both stochastic noise and inefficiency for model identification. Instead, only the conditional mean of the inefficiency is assumed, which depends on related determinants with a wide range of choice, via a positive parametric function. As a result, technical efficiency is constructed without relying on an assumed distribution on composite error. The model provides flexible structures on both the production frontier and inefficiency, thereby alleviating the risk of model misspecification in production and efficiency analysis. The estimator involves a series based nonlinear least squares estimation for the unknown parameters and a kernel based local estimation for the technology function. Promising finite-sample performance is demonstrated through simulations, and the model is applied to investigate productive efficiency among OECD countries from 1970–2019.

This paper aims to develop a dynamic two-sided stable matching method based on preference information of the matching objects in uncertain environments, so as to solve the matching problem of cloud manufacturing tasks and services with load balancing.

For dynamic two-sided matching, due to the complexity of social environment and the limitation of human cognition, hesitation and fuzziness always exist in the process of multi-criteria assessment. First, in order to obtain the accurate preference information of each matching object, uncertain linguistic variables, uncertain preference ordinal and incomplete complementary matrices are used to evaluate multi-criteria preference information. This process is undertaken by considering the probability of each possible matching pair. Second, the preference information at different times is integrated by using the time-series weight to obtain the comprehensive satisfaction degree matrices of the matching objects. Further, the load adjustment parameter is used to increase the satisfaction degree of the matching objects. Afterward, a dynamic two-sided stable matching optimization model is constructed by considering stable matching conditions. The model aims to maximize the satisfaction degree and minimizes the difference in the satisfaction degree of matching objects. The optimal stable matching results can be obtained by solving the optimization model. Finally, a numerical example and comparative analysis are presented to demonstrate the characteristics of the proposed method.

Uncertain linguistic variables, uncertain preference orders and incomplete complementary matrices are used to describe multi-criteria preference information of the matching objects in uncertain environments. A dynamic two-sided stable matching method is proposed, based on which a DTSMDM (dynamic two-sided matching decision-making) model of cloud manufacturing with load balancing can be constructed. The study proved that the authors can use the proposed method to obtain stable matching pairs and higher matching objective value through comparative analysis and the sensitivity analysis.

A new method for the two-sided matching decision-making problem of cloud manufacturing with load balancing is proposed in this paper, which allows the matching objects to elicit language evaluation under uncertain environment more flexibly to implement dynamic two-sided matching based on preference information at different times. This method is suitable for dealing with a variety of TSMDM (two-sided matching decision-making) problems.