Search results

The existing three-stage network Data Envelopment Analysis (DEA) models with shared input are self-assessment model that are prone to extreme efficiency scores in pursuit of decision-making units (DMUs) efficiency maximization. This study aims to solve the sorting failure problem of the three-stage network DEA model with shared input and applies the proposed model to evaluate innovation resource allocation efficiency of Chinese industrial enterprises.

A three-stage network cross-DEA model considering shared input is proposed by incorporating the cross-efficiency model into the three-stage network DEA model. An application of the proposed model in the innovation resource allocation of industrial enterprise is implemented in 30 provinces of China during 2015–2019.

The efficiency of DMU would be overestimated if the decision-maker preference is overlooked. Moreover, the innovation resource allocation performance of Chinese industrial enterprises had a different spatial distribution, with high in eastern and central China and low in western China. Eastern China was good at knowledge production and technology development but not good at commercial transformation. Northeast China performed well in technology development and commercial conversion but not in knowledge production. The central China did not perform well in terms of technology development.

A three-stage network DEA model with shared input is proposed for the first time, which makes up for the problem of sorting failure of the general three-stage network model.

This study aims at evaluating the technical efficiency (TE) of healthcare systems in the Arab region and exploring the key factors that affect the efficiency performance.

The study applies a two-stage Data Envelopment Analysis (DEA) approach to a sample of 20 Arab countries. In the first stage, a DEA model is used to calculate the TE scores of the examined healthcare systems in 2019 and 2010, following both the output and input orientations of efficiency. In the second stage, a censored Tobit model is estimated to investigate the determinants of healthcare efficiency.

DEA results of 2019 indicate that achievable efficiency gains of the Arab countries range from 0.4% to 16% under the output and input orientations, respectively. Six countries are efficient under both orientations. Although the average efficiency scores of the Arab countries have deteriorated between 2010 and 2019, Djibouti and Sudan had the greatest efficiency improvements between the two years. Bahrain, Mauritania, Morocco and Qatar proved to be efficient in 2010 and 2019 under the two orientations of efficiency and according to the two DEA specifications followed. The Tobit model reveals that corruption and government health expenditure tend to have an adverse impact on healthcare efficiency.

The author evaluates healthcare efficiency and healthcare's efficiency determinants in the Arab countries. Regardless Arab countries' diversity, these countries are facing common health challenges, including diminishing role of governments in healthcare financing; increased out-of-pocket healthcare spending; poor healthcare outputs and prevalence of health inequities resulting from weak governance institutions. Comparing the efficiency of healthcare systems between 2010 and 2019 gives insights on the potential impact of the Arab spring uprisings on healthcare efficiency. Moreover, examining the determinants of healthcare efficiency allows for better understanding of how to improve the efficiency of healthcare systems in the region.

Because of the importance of the wheat industry in the economy, a real-featured performance measurement approach is essential for the wheat production process. The purpose of this paper is to develop a data envelopment analysis (DEA) model that is fully compatible with the wheat production process so that managers and farmers can use it to evaluate the efficiency of wheat farms for strategic decisions.

A dynamic multi-stage network DEA model is developed to evaluate the efficiency of wheat production farms in short-term (two-year) and long-term (eight-year) periods.

The results of this study show that because of the lack of long-term planning and excessive reliance on rain, most of the investigated regions have no stability in efficiency, and the efficiency of the regions changes in a zigzag manner over time. Among studied regions, only the Hashtrood region has high and stable efficiency, and other regions can follow the example of this region's cultivation method.

To the best of the authors’ knowledge, this study is the first one that uses the dynamic multi-stage network DEA considering every other year cultivation method and direct–indirect inputs in the agricultural section.

The purpose of this paper is to provide scientific guidance for the integration of industrialization and information (TIOII). In recent years, TIOII has promoted the development of intelligent manufacturing in China. However, many enterprises blindly invest in TIOII, which affects their normal production and operation.

This study establishes an efficiency evaluation model for TIOII. In this paper, entropy analytic hierarchy process (AHP) constraint cone and cross-efficiency are added based on traditional data envelopment analysis (DEA) model, and entropy AHP–cross-efficiency DEA model is proposed. Then, statistical analysis is carried out on the integration efficiency of enterprises in Guangzhou using cross-sectional data, and the traditional DEA model and entropy AHP–cross-efficiency DEA model are used to analyze the integration efficiency of enterprises.

The data show that the efficiency of enterprise integration is at a medium level in Guangzhou. The efficiency of enterprise integration has no significant relationship with enterprise size and production type but has a low negative correlation with the development level of enterprise integration. In addition, the improved DEA model can better reflect the real integration efficiency of enterprises and obtain complete ranking results.

By adding the entropy AHP constraint cone and cross-efficiency, the traditional DEA model is improved. The improved DEA model can better reflect the real efficiency of TIOII and obtain complete ranking results.

Competition in the banking sector is more complex than in the past, and survival has become more difficult than before. The purpose of this paper is to propose a grey methodology for evaluating, clustering and ranking the performance of bank branches with imprecise and uncertain data in order to determine the relative status of each branch.

In this study, the two-stage data envelopment analysis model with grey data is applied to assess the efficiency of bank branches in terms of operations. The result of grey two-stage data envelopment analysis model is a grey number as efficiency value of each branch. In the following, the branches are classified into three grey categories of performance by grey clustering method, and the complete grey ranking of branches are performed using “minimax regret-based approach” and “whitening value rating”.

The results show that after grey clustering of 22 branches based on grey efficiency value obtained from the grey two-stage DEA model, 6 branches are assigned to “excellent” class, 4 branches to “good” class and 12 branches to “poor” class. Moreover, the results of MRA and whitening value rating models are integrated, and a complete ranking of 22 branches are presented.

Grey clustering of branches based on grey efficiency value can facilitate planning and policy-making for branches so that there is no need to plan separately for each branch. The grey ranking helps the branches find their current position compared to other branches, and the results can be a dashboard to find the best practices for benchmarking.

Compared with traditional DEA methods which use deterministic data and consider decision-making units as black boxes, in this research, a grey two-stage DEA model is proposed to evaluate the efficiency of bank branches. Furthermore, grey clustering and grey ranking of efficiency values are used as a novel solution for improving the accuracy of grey two-stage DEA results.

Operational performance is critical for the banking sector for both managers and other stakeholders as it strongly affects the overall performance of the banking system. Traditional performance measures such as ratio analysis encountered certain shortcomings. At this juncture, data envelopment analysis (DEA) approaches are increasingly applied in bank efficiency studies. However, basic DEA models ignored the interactions between consecutive terms and focused primarily on measuring performance independently for each study period. All this is required to develop an operational performance model that can enable the long-term decision model.

An attempt has been made to develop a dynamic DEA within a non-radial category to measure interconnection activities considering non-performing loans as an undesirable link. This study uses the Indian banking dataset from 2015 to 2019. The study's research design directs three directions: ‘comparison of the dynamic DEA with the traditional static DEA model, areas of inefficiencies that are investigated for each factor using the factor efficiency index and the robustness results highlighting the performance difference between bank categories.'

Comparing with static DEA results, the study confirms that the dynamic model best measures long-term operational performance due to the linkage between consecutive terms. The efficiency analysis concludes that the input factor that requires the most improvement is ‘fixed assets' and ‘deposits'. The output factor that needs the most progress is ‘non-interest income'. The robustness of the developed model is proven by ownership categories present within the Indian banking system. At a significance level of 10%, the result of both the separate and dynamic model for privately owned banks is significantly better than that of publicly owned banks.

This paper proposes an operational efficiency model for Indian banks in line with undesirable output. The mean factor efficiency analysis related to non-radial DEA modelling enhances managerial flexibilities in determining improvement initiatives.

This study aims to propose a refined dynamic network slacks-based measure (DNSBM) to evaluate the efficiency of China's regional green innovation system which consists of basic research, applied research and commercialization stages and explore the influencing factors of the stage efficiency.

A two-step procedure is employed. The first step proposes an improved DNSBM model with flexible settings of stages' input or output efficiency and uses second order cone programming (SOCP) to solve the non-linear problem. In the second step, least absolute shrinkage and selection operator (LASSO) and Tobit models are used to explore the influencing factors of the stage efficiency. Global Dynamic Malmquist Productivity Index (GDMPI) and Dagum Gini coefficient decomposition method are introduced for further discussion of the productivity change and regional differences.

On average, Chinese provincial green innovation efficiency should be improved by 24.11% to become efficient. The commercialization stage outperforms the stages of basic research and applied research. Comparisons between the proposed model and input-oriented, output-oriented and non-oriented DNSBM models show that the proposed model is more advanced because it allows some stages to have output-oriented model characteristics while the other stages have input-oriented model characteristics. The examination of the influencing factors reveals that the three stages of the green innovation system have quite diverse influencing factors. Further discussion reveals that Chinese green innovation productivity has increased by 39.85%, which is driven mainly by technology progress, and the increasing tendency of regional differences between northern and southern China should be paid attention to.

This study proposes an improved dynamic three-stage slacks-based measure (SBM) model that allows calculating output efficiency in some stages and input efficiency in the other stages with the application of SOCP approach. In order to capture productivity change, this study develops a GDMPI based on the DNSBM model. In practice, the efficiency of regional green innovation in China and the factors that influence each stage are examined.

A stroke is a serious, life-threatening condition that occurs when the blood supply to a part of the brain is cut off. The earlier a stroke is treated, the less damage is likely to occur. One of the methods that can lead to faster treatment is timely and accurate prediction and diagnosis. This paper aims to compare the binary integer programming-data envelopment analysis (BIP-DEA) model and the logistic regression (LR) model for diagnosing and predicting the occurrence of stroke in Iran.

In this study, two algorithms of the BIP-DEA and LR methods were introduced and key risk factors leading to stroke were extracted.

The study population consisted of 2,100 samples (patients) divided into six subsamples of different sizes. The classification table of each algorithm showed that the BIP-DEA model had more reliable results than the LR for the small data size. After running each algorithm, the BIP-DEA and LR algorithms identified eight and five factors as more effective risk factors and causes of stroke, respectively. Finally, predictive models using the important risk factors were proposed.

The main objective of this study is to provide the integrated BIP-DEA algorithm as a fast, easy and suitable tool for evaluation and prediction. In fact, the BIP-DEA algorithm can be used as an alternative tool to the LR model when the sample size is small. These algorithms can be used in various fields, including the health-care industry, to predict and prevent various diseases before the patient’s condition becomes more dangerous.

Safety efficiency is the key to balance safety and production in construction industry; but the existing safety efficiency evaluation methods have the limitations of overestimating efficiency and ignoring undesirable outputs; therefore, according to the characteristics of safety production in construction industry, this paper innovatively develops a new cross-efficiency data envelopment analysis method to analyze safety efficiency, which can solve the limitations of traditional methods; and then the safety efficiency and its influencing factors of China's construction industry are analyzed, and some useful conclusions are obtained to improve its safety efficiency.

A new cross-efficiency data envelopment analysis method with undesirable outputs is proposed; and the two-stage efficiency analysis framework is designed.

First, the construction industries in different areas have different reasons for affecting their safety efficiency; second, the evaluation results of global safety priority tend to be more acceptable; third, frequent safety accidents and low resource utilization lead to a slow downward trend of the safety efficiency of China's construction industry in the long run; fourth, construction engineering supervision, construction industrial scale, and construction industrial structure have the significant impact on safety efficiency.

Theoretically, a new cross-efficiency data envelopment analysis method with undesirable outputs is proposed for evaluating safety efficiency; practically, the safety efficiency and its influencing factors of China's construction industry are analyzed.

This paper aims to evaluate commercial bank branches' performance in dynamic and competitive conditions where decision-making units (DMUs) seek a greater proportion of shared resources as it happens in the real world. By introducing the concepts of cross-shared and serial-shared resources, the authors have emphasized the role of evaluation results of past periods on branches' total efficiency.

In this study, a new mixed-integer data envelopment analysis (MI-DEA) model has been proposed to evaluate the performance of a dynamic network in the presence of cross-shared and serial-shared resources.

The proposed model helps bank managers to find the source of inefficiencies and establish a connection between the results of the periodic performance of the DMUs and the distribution of serial and cross-shared resources. The results show that the weighting coefficients of the periods do not significantly affect the overall efficiency of commercial bank branches, unlike desirable and undesirable intermediates.

This paper presents the following factors: (1) A new mixed-integer network data envelopment analysis model is developed under dynamic competitive conditions. (2) For the first time in DEA models, the concept of cross-shared resources is proposed to consider shared resources between DMUs. (3) All controllable, uncontrollable, desirable and undesirable outputs in the model are considered with the possibility to transfer to the next periods. (4) A case study is given for the performance evaluation of 38 branches of an Iranian commercial bank from 2016 to 2020.