Search results
1 – 10 of 78Anagi Balachandra, Roz-Ud-Din Nassar and Parviz Soroushian
This study aims to report the development and experimental evaluation of three innovative corrosion-resistant modified epoxy coatings, namely, nanocomposite/toughened…
Abstract
Purpose
This study aims to report the development and experimental evaluation of three innovative corrosion-resistant modified epoxy coatings, namely, nanocomposite/toughened, self-healing and hybrid epoxy coatings, for application on steel substrates.
Design/methodology/approach
The corrosion resistance of these coatings was evaluated in a highly corrosive environment of salt fog spray for 2,500 h of exposure. Electrochemical impedance spectroscopy (EIS) measurements in sustained exposure to NaCl in a saturated Ca(OH)2 solution, rust creepage measurements at the location of scribe formed in the coatings and adhesion strength test were used to assess the performance of the innovative coatings. Commercially available marine-grade protective epoxy coatings were used as the reference coatings.
Findings
The test results showed that the modified epoxy coatings exhibited excellent corrosion resistance when exposed to an aggressive environment for extended periods. The EIS measurements, rust creepage measurements, pull-off strength and visual appearance of the aged modified–epoxy–coated specimens confirmed the enhanced corrosion resistance of the modified epoxy coatings.
Originality/value
Among the three types of modified coatings, the hybrid epoxy coating stands out to be the best performer.
Details
Keywords
Naveenkumar R., Shanmugam S. and Veerappan AR
The purpose of this paper is to understand the effect of basin water depth towards the cumulative distillate yield of the traditional and developed single basin double slope solar…
Abstract
Purpose
The purpose of this paper is to understand the effect of basin water depth towards the cumulative distillate yield of the traditional and developed single basin double slope solar still (DSSS).
Design/methodology/approach
Modified single basin DSSS integrated with solar operated vacuum fan and external water cooled condenser was fabricated using aluminium material. During sunny season, experimental investigations have been performed in both conventional and modified DSSS at a basin water depth of 3, 6, 9 and 12 cm. Production rate and cumulative distillate yield obtained in traditional and developed DSSS at different water depths were compared and best water depth to attain the maximum productivity and cumulative distillate yield was found out.
Findings
Results indicated that both traditional and modified double SS produced maximum yield at the minimum water depth of 3 cm. Cumulative distillate yield of the developed SS was 16.39%, 18.86%, 15.22% and 17.07% higher than traditional at water depths of 3, 6, 9 and 12 cm, respectively. Cumulative distillate yield of the developed SS at 3 cm water depth was 73.17% higher than that of the traditional SS at 12 cm depth.
Originality/value
Performance evaluation of DSSS at various water depths by integrating the combined solar operated Vacuum fan and external Condenser.
Details
Keywords
FRANCE: Migration policy will harden
Details
DOI: 10.1108/OXAN-ES283969
ISSN: 2633-304X
Keywords
Geographic
Topical
Goutam Kumar Jana, Sumit Bera, Ribhu Maity, Tithi Maity, Arjun Mahato, Shibayan Roy, Hemakesh Mohapatra and Bidhan Chandra Samanta
The manufacture of polymer composites with a lower environmental footprint requires incorporation of sustainably sourced components. In addition, the incorporation of novel…
Abstract
Purpose
The manufacture of polymer composites with a lower environmental footprint requires incorporation of sustainably sourced components. In addition, the incorporation of novel components should not compromise the material properties. The purpose of this paper is to demonstrate the use of a synthetic amine functional toluidine acetaldehyde condensate (AFTAC) as a modifier for fiber-reinforced epoxy composites. One of the fiber components was sourced from agricultural byproducts, and glass fiber was used as the fiber component for comparison.
Design/methodology/approach
The AFTAC condensate was synthesized via an acid-catalyzed reaction between o-toluidine and acetaldehyde. To demonstrate its efficacy as a toughening agent for diglycidyl ether bisphenol A resin composites and for the comparison of reinforcing materials of interest, composites were fabricated using a natural fiber (mat stick) and a synthetic glass fiber as the reinforcing material. A matched metal die technique was used to fabricate the composites. Composites were prepared and their mechanical and thermal properties were evaluated.
Findings
The inclusion of AFTAC led to an improvement in the mechanical strengths of these composites without any significant deterioration of the thermal stability. It was also observed that the fracture strengths for mat stick fiber-reinforced composites were lower than that of glass fiber-reinforced composites.
Originality/value
To the best of the authors’ knowledge, the use of the AFTAC modifier as well as incorporation of mat stick fibers in epoxy composites has not been demonstrated previously.
Details
Keywords
Zelensky failed to convince Congress to unlock USD61bn of stalled assistance to Ukraine. As the presidential election looms, President Joe Biden will need to draw on significant…
Details
DOI: 10.1108/OXAN-DB284276
ISSN: 2633-304X
Keywords
Geographic
Topical
Zhe Du, Changjie Chen and Xinhou Wang
Stab-resistant body armor (SRBA) is used to protect the body from sharp knives. However, most SRBA materials currently have the disadvantages of large weight and thickness. This…
Abstract
Purpose
Stab-resistant body armor (SRBA) is used to protect the body from sharp knives. However, most SRBA materials currently have the disadvantages of large weight and thickness. This paper aims to prepare lightweight and high-performance SRBA by 3D printing truss structure and resin-filling method.
Design/methodology/approach
The stab resistance truss structure was prepared by the fused deposition modeling method, and the composite structure was formed after filling with resin for dynamic and quasi-static stab tests. The optimized structural plate can meet the standard GA68-2019. Digital image correlation technology was used to analyze the local strain changes during puncture. The puncture failure mode was summarized by the final failure morphologies. The explicit dynamics module in ANSYS Workbench was used to analyze the design of the overlapped structure stab resistance process in this paper.
Findings
The stab resistance performance of the 3D-printed structural plate is affected by the internal filling pattern. The stab resistance performance of 3D-printed structural parts was significantly improved after resin filling. The 50%-diamond-PLA-epoxy, with a thickness of only 5 mm was able to meet the stab resistance standard. Resins are used to increase the strength and hardness of the material but also to increase crack propagation and reduce the toughness of the material. The overlapping semicircular structure was inspired by the exoskeleton structure of the demon iron beetle, which improved the stab resistance between gaps. The truss structure can effectively disperse stress for toughening. The filled resin was reinforced by absorbing impact energy.
Originality/value
The 3D-printed resin-filled truss structure can be used to prepare high-performance stab resistance structural plates, which balance the toughness and strength of the overall structure and ultimately reduce the thickness and weight of the SRBA.
Details
Keywords
Tatiana Ershova, Marina Zavertiaeva and Dmitry Kirpishchikov
This study examines the impact of influential shareholders, namely, state and influential businessmen, on the dividend policies of firms. A special focus is made on the causal…
Abstract
Purpose
This study examines the impact of influential shareholders, namely, state and influential businessmen, on the dividend policies of firms. A special focus is made on the causal effect of exogenous changes: general and personal economic sanctions leading to toughened state policies concerning dividends.
Design/methodology/approach
Russian firms included into the Moscow Stock Exchange Broad Market Index were examined for a period from 2009 to 2019 using a generalized method of moments and a tobit model. The effect of personal sanctions was elucidated with the use of difference-in-differences method with multiple time periods.
Findings
The analysis showed that government or businessmen's ownership does not affect dividend payments. However, after 2014, state-owned companies began to increase their payments. At the same time, owing to a series of changes triggered by general economic sanctions, businessmen-owned companies decrease their dividends payout ratio. Personal sanctions imposed do not have long-term effect on Russian companies' dividends.
Originality/value
This study estimates the effect of ownership structure on dividend payouts after an exogenous change. The results show that there is heterogeneity in influential owners' decisions regarding dividends and changes strengthening it.
Details
Keywords
Building industrial clusters is getting much more political attention and strategic orientation in all developing countries. This study started by revising the conceptual and…
Abstract
Building industrial clusters is getting much more political attention and strategic orientation in all developing countries. This study started by revising the conceptual and theoretical frameworks for industrial clusters, followed by some insights and contributions about empirical bases for clusters' dynamics and processes. The study focused on the case of Agadir Agreement between four Arab countries (Egypt, Jordon, Morocco, and Tunisia), which was initiated after the Euro-Mediterranean partnerships, and the rationale of the agreement was based on the concept of cumulative value-added origin. The study based its methodology on analyzing the international and bilateral trade flows of six industrial goods from the automotive sector among the four countries and with the EU countries to detect the degree of industrial collaboration and the achieved success of each country in this sector. The study indicated that the four countries used the concept of industrial clusters for economic development, but the results of the analysis showed that till now Agadir Agreement only achieved a shallow integration, while failed to deeply integrate as one big collaborative industrial cluster.
Details
Keywords
Hala Abdelgawad and Mazen Hassan
Theoretically, the quality of representation is likely to be enhanced when more societal segments are included in formal political structures. An interesting question, however, is…
Abstract
Purpose
Theoretically, the quality of representation is likely to be enhanced when more societal segments are included in formal political structures. An interesting question, however, is whether a similar correlation holds empirically outside established Western democracies. In the 2015 Egyptian parliament, women representation achieved an all-time high of 14.9% of total seats – nearly four times the historical Egyptian average. It is asked whether female legislators riding this unprecedent tide were different from their male colleagues in terms of their socio-economic backgrounds. But more importantly, the authors examine whether this increased representation led to any change in inclusion of more women’s issues in the legislative agenda, and how traditional topics are debated.
Design/methodology/approach
The authors conducted a content analysis of selected parliamentary scripts – generating on an original data set – to trace the topics and interventions raised by female MPs. The authors draw on the extensive literature on women’s representation, giving special attention to the structure versus agency dichotomy in this quest.
Findings
The authors conclude that female MPs were as active in parliamentary debates as to their male colleagues. Moreover, women did stress women issues more than men. The results indicate that the inclusion of traditionally under-represented groups does affect parliamentary agendas.
Originality/value
The authors conducted a content analysis of selected parliamentary scripts – generating on an original data set – to trace the topics and interventions raised by female MPs based on a case study of the 2015 Egyptian parliament.
Details
Keywords
The purpose of this scoping rapid review was to identify and analyse existing qualitative methodologies that have been used to investigate K-12 teachers' lived experiences of…
Abstract
Purpose
The purpose of this scoping rapid review was to identify and analyse existing qualitative methodologies that have been used to investigate K-12 teachers' lived experiences of adult cyber abuse as a result of student content “going viral” to propose a novel methodological stance incorporating the Australian Online Safety Act 2021.
Design/methodology/approach
A search of Google Scholar was conducted using keywords and phrases related to cyber trauma, teachers, qualitative methods and the Online Safety Act. Inclusion criteria for the review were: (1) published in English, (2) focused on teachers' experiences of online abuse and cyberbullying associated with viral posts and (3) employed a qualitative inquiry methodology. Full-text articles were obtained for those that met the inclusion criteria. Data were extracted and analysed using a PRISMA flowchart and inductive thematic analysis.
Findings
This methodology is considered to be justified, as the eSafety Commissioner's Safety-by-Design principles do not have any legal or regulatory enforceability, whereas the Online Safety Act 2021 provides the Australian eSafety Commissioner an avenue to drive greater algorithmic transparency and accountability.
Research limitations/implications
The findings of this review informed the development of a novel methodological stance for investigating Australian teachers' lived experiences of adult cyber abuse associated with viral posts. It provides a methodological positioning to support trauma informed qualitative research into adult cyber abuse, informed by the work of the eSafety Commissioner and the Online Safety Act.
Originality/value
Cybertrauma is described as “any trauma that is a result of self- or, other-directed interaction with, mediated through, or from any electronic Internet/cyberspace ready device or machine learning algorithm, that results in impact now or the future” (Knibbs, 2021). It may result from the tracking of movement through various mobile phone features and applications such as location sharing, non-consensual monitoring of social media, and humiliation or punishment through the sharing of intimate images online, through to direct messages of abuse or threats of violence or humiliation. These actions are further perpetuated through automated searches, insights and recommendations on social media (i.e. engagement metrics promote memes, Facebook posts, Tweets, Tiktoks, Youtubes and so on). This is a novel methodology, as it not only considers direct cybertrauma but also automated forms of cybertrauma.
Details