Search results

This paper aims to investigate the influence of droplet infiltration and sliding on the deposition size and make a uniform deposition by controlling the interaction between droplets, using the three-dimensional lattice Boltzmann method (LBM) based on the actual working condition.

D3Q19 Shan-Chen LB approach is developed and optimized based on the metal droplet deposition. The Carnahan-Starling equation of state and transition layers are introduced to maintain the greater stability and low pseudo velocities. In addition, an additional collision term is adopted to implement immersed moving boundary scheme to deal with no-slip boundaries on the front of the phase change.

The numerical results show that the new¬ incoming droplet wet and slide off the solidified surface and the rejection between droplets are the reasons for the deviation of the actual deposition length. The total length of the longitudinal section negatively correlates with the deposition distance. To improve the dimensional accuracy, the deposition distance and repulsion rate need to be guaranteed. The optimal deposition distance is found to have a negative linear correlation with wettability.

The numerical model developed in this paper will help predict the continuous metal droplet deposition and provide guidance for the selection of deposition distance.

The purpose of this paper is to investigate the superior relationship between blood lipid- and cardiovascular disease (CVD)-related hematological parameters using superior grey relational analysis (GRA).

A total of 294 individuals who underwent simultaneous routine blood examination and blood lipid examination in the Physical Examination Center of the First Affiliated Hospital of Shantou University Medical College were included in this study. Superior GRA was performed to find out the superior factor in CVD-related hematological parameters and blood lipids. CVD-related hematological parameters included red blood cell distribution width, white cell count, and platelet count, platelet distribution width, mean platelet volume, as well as platelet crit. The indicators of blood lipids analyzed here consist of low-density lipoprotein, high-density lipoprotein, triglyceride and total cholesterol.

The results showed that all the grey relational degree of hematological parameters and blood lipids were over 0.8; the superior factor in hematological parameters was PLT, whereas TC was the superior factor in blood lipids.

Findings of this study suggested that hematological parameters are closely related to blood lipids and a potential role for hematological parameters in the prediction of dyslipidemia, which need further study; TC has the greatest influence on hematological parameters, whereas TG displays a minimal impact.

To the authors’ best knowledge, it was the first study to analyze the relationship between various CVD-related hematological parameters and blood lipids via superior GRA.

This study examines why and when qualitative job insecurity (JI) leads to instigated workplace incivility.

The authors collected data from 227 Chinese full-time employees from multiple organizations at two time points. Structural equation modeling was used to test hypotheses.

Results show that qualitative JI is positively related to instigated workplace incivility through negative emotions; this indirect relationship is weaker among employees with higher self-compassion and stronger among employees with higher rumination.

The authors shift the predominant focus on the predictor of instigated workplace incivility from quantitative JI to qualitative JI. Based on the transactional model of stress and the stressor–emotion model of counterproductive work behavior (CWB), they provide new theoretical insights on why qualitative JI affects workplace incivility and identify new boundary conditions that affect employees' reactions to qualitative JI.

The purpose of this paper is to propose a novel method using support vector machine (SVM) classifiers for objective seam pucker evaluation. Features are extracted using wavelet analysis and gray-level co-occurrence matrix (GLCM), and the samples are evaluated using SVM classifiers. The study aims to solve the problem of inappropriate parameters and large required samples in objective seam pucker evaluation.

Initially, seam pucker image was captured, and Edge detection and Hough transform were utilized to normalize the seam position and orientation. After cropping the image, the intensity was adjusted to the same identical level through histogram specification. Then, the standard deviations of the horizontal image and diagonal image, reconstructed using wavelet decomposition and reconstruction, were calculated based on parameter optimization. Meanwhile, GLCM was extracted from the restructured horizontal detail image, then the contrast and correlation of GLCM were calculated. Finally, these four features were imported to SVM classifiers based on genetic algorithm for evaluation.

The four extracted features reflected linear relationships among five grades. The experimental results showed that the classification accuracy was 96 percent, which catches up to the performance of human vision, and resolves ambiguity and subjective of the manual evaluation.

There are large required samples in current research. This paper provides a novel method using finite samples, and the parameters of the methods were discussed for parameter optimization. The evaluation results can provide references for analyzing the reason of wrinkles during garment manufacturing.

The purpose of this paper is to provide a solution for Reynolds equation with both throttling term and reverse throttling term and provides a reference for changing damping of hydrostatic bearing.

The reverse throttling term is introduced into the Reynolds equation, and the adaptive damping factor is used in the Newton iteration method to improve convergence of numerical calculations. The static and dynamic performances of this bearing are numerically investigated by the finite-element method.

The results indicate that the reflux orifices lead to a decrease in load capacity at a high eccentricity ratio. Additionally, the mass inflow rate is increased; however, the additional inflow increase can be controlled by enhanced backpressure of the reflux orifice. Nevertheless, the bearing with the reflux orifice shows superiority in resisting high-frequency disturbances and enhances direct damping by 20% under a high backpressure.

This work presents an adaptive Newton damping iterative method for solving Reynolds equation with both throttling term and reverse throttling term. This work also provides a new idea for bearing structure design in improving damping.

Drawing upon relative absorptive capacity (AC) perspective, this study proposes a research model connecting R&D investment, three types of supply chain AC—AC from suppliers, customers and university and research institutes (U&RIs)—and firm innovativeness and investigates the contingent effects of dysfunctional competition on the link between R&D investment and supply chain AC.

The authors used data collected from 262 manufacturers in three areas of China to empirically examine the conceptual model. The corresponding hypotheses were tested with structural equation modeling and regression analysis.

The empirical results demonstrate that AC from customers and AC from U&RIs play significant mediating roles in the relationship between R&D investment and firm innovativeness. Moreover, R&D investment has a significantly greater effect on AC from U&RIs under high levels of dysfunctional competition.

First, by conceptualizing AC from a relative view, this study discloses the unique roles of knowledge from different supply chain partners in realizing the benefits of R&D investment in innovation. Second, the exploration of the contingent roles of dysfunctional competition in the emerging economy of China enriches insights on the roles of institutional environment on knowledge absorption and the knowledge on relative AC in emerging economies.

Drawing on self-determination theory and insights from the literature on service-dominant (S-D) logic and value co-creation, this paper aims to investigate the impacts of an S-D orientation on positive customer outcomes (i.e. customer participation behaviors, customer citizenship behaviors and quality of life) and the underlying mechanisms of these effects.

Custom travel service (CTS) was chosen as the research setting. In total, 303 valid questionnaires were gathered from tourists in China. The partial least squares structural equation modeling approach was used for model estimation.

Tourism firms’ S-D orientation positively influences customer participation behaviors via customer psychological need satisfaction (i.e. perceived autonomy, competence and relatedness), customer citizenship behaviors via perceived relatedness and customer quality of life via perceived autonomy and perceived competence.

Although the impact of S-D orientation is studied in the CTS context, this study illustrates how firms embracing S-D logic can facilitate value co-creation and customer quality of life, presenting a more precise picture for academics and practitioners.

This paper is the first attempt to empirically examine the relationships among S-D orientation, customer value cocreation and quality of life. The relevance of customer psychological need satisfaction is acknowledged in this study.

With the rapid development of fresh food e-commerce, sustaining customer loyalty is becoming critical for fresh food e-tailers (FFE) to be competitive. This study aims to investigate how to sustain customer loyalty of FFE in China.

A comprehensive literature review leads to the development of a conceptual model using the American customer satisfaction index (ACSI). This model is then tested and validated through structural equation modelling (SEM) of the survey data in China.

The study reveals that trust and perceived product risk significantly affect customer loyalty. It states that trust is significantly influenced by customer satisfaction and perceived product risk. Furthermore, the study shows that perceived risk of online shopping does not significantly influence customer trust and loyalty.

This study is the first in China for exploring how to sustain customer loyalty of FFE. The findings are significant for FFE to develop customer loyalty by formulating appropriate policies and strategies.

The purpose of this paper is to obtain high-solids-content and low-viscosity starch adhesive, and improve bonding strength of the pure starch adhesive.

Maize starch was treated by hydrochloric acid solution with different concentrations, and acid-thinned starch adhesive was prepared. Polyisocyanate as a crosslinking agent was added to improve water resistance of the pure starch adhesive.

The physical and chemical properties of the acid-thinned starch adhesive were characterised. Acid hydrolysis did not change structure of starch granules, but increased its crystallinity. After acid modification, starch granules became less smooth and some fragments appeared. Acid treatment had little influence on thermal stability of starch, when acid hydrolysis was not strong. High concentration of HCl solution led to starch granules being destroyed, resulting in decrease in bonding strength. The optimal HCl concentration was 0.5 mol/L. Polyisocyanate addition was beneficial to improve the bonding strength of the acid-thinned starch adhesive.

Acid hydrolysis changed the properties of the starch adhesive.

Acid hydrolysis decreased viscosity of the starch adhesive and improved its solids content, which had a positive effect on the application of the starch adhesive.

It was helpful to develop an environment-friendly, natural polymer-based wood adhesive.

The properties of acid-thinned starch and acid-thinned starch adhesive were studied.

The purpose of this paper is to empirically investigate the effects of institutional support on product and process innovation and firm performance and describe how dysfunctional competition influences relevant outcomes.

This study develops a research model based on institution-based view and tests it using structural equation modeling and empirical data collected from 300 manufacturers in China.

The results show that institutional support positively affects product and process innovation and firm performance. Both product and process innovation improve firm performance. The findings reveal that dysfunctional competition significantly reduces the positive effects of institutional support on product and process innovation but leaves the effects of institutional support and product and process innovation on firm performance unaffected.

This study contributes to innovation literature by providing insights into the impact of China’s institutional environment on manufacturing firms’ product and process innovation decisions. The findings also contribute to institution-based view literature by providing empirical evidence on the joint effects of institutional support and dysfunctional competition on product and process innovation and firm performance. This study can help manufacturers in China take advantage of institutional environment and adjust product and process innovation decisions accordingly.