Search results

Although there is a growing body of work on immigrants' information behavior, little is known about the pre-arrival information experiences of immigrants who consult formal information sources such as immigration agents. Drawn from a larger study on the information behavior of immigrants, this paper mainly reports the semi-structured interview findings on the pre-arrival information experiences of Bangladeshi immigrants who used formal information sources with discussion on how that affected their post-arrival settlement into Canada.

The study used a mixed method approach with semi-structured interviews (n = 60) and surveys (n = 205) with participants who arrived in Canada between the years of 1971 and 2017. Data were collected from May 2017 to February 2018.

Although the overall scope of the original study is much larger, this paper features findings on the pre-arrival information experiences derived mainly from an analysis of interview data. This study provides insights into the pre-arrival information experiences of Bangladeshi immigrants consulting formal information sources such as immigration firms, individual immigration consultants and more formal government agencies. The author introduces a new concept of “information crafting” by exploring the negative consequences of selective information sharing by immigration consultants/agents in newcomers' settlements in Canada, primarily positive information about life in Canada, sometimes with exaggeration and falsification. The interview participants shared story after the story of the settlement challenges they faced after arriving in Canada and how the expectations they built through the information received from immigration consultants and government agencies did not match after arrival. This study emphasizes the importance of providing comprehensive information about life in Canada to potential newcomers so that they can make informed decisions even before they apply.

The findings of this study have theoretical and practical implications for policy and research. This study provides insights into the complicated culturally situated pre-arrival information experiences of Bangladeshi immigrants. Moreover, the study findings encourage researchers in various disciplines, including psychology, migration studies and geography, to delve more deeply into newcomers' information experiences using an informational lens to examine the information newcomers receive from diverse sources and their effects on their post-arrival settlement in a new country. The study challenges the general assumptions that formal information sources are always reputable, useful, and comprehensive, and it provides some future directions for research that seeks to understand the culturally situated information behavior of diverse immigrant groups.

The construction industry has considerably evolved in the recent two decades due to the emergence of sustainability, lean construction (LC) and building information modelling (BIM). Despite previous research efforts, there is still a gap concerning the multidimensional nature of their integration. Hence, this study aims to fill the mentioned knowledge gap through exploring and comparing the challenges, enablers, techniques as well as benefits of integrating LC with BIM and sustainability in building construction projects.

A systematic literature review was conducted to fulfill the purpose of this study.

The findings reveal and compare the challenges, enablers, techniques and benefits of integrating LC with BIM and sustainability in building construction projects. The results suggest that there are eight common challenges for integrating LC with BIM and sustainability, including high initial cost, lack of collaboration, lack of professionals and lack of compatible contractual framework. The discovered challenges, enablers, techniques and benefits seem to be mostly routed in people. The findings also suggest that the synergistic benefits of integrating LC with BIM and sustainability can overcome the common challenges (safety, reliability, productivity, collaboration and quality) in construction projects.

The findings contribute to the literature and practice concerning the integration of LC with BIM and sustainability by exploring, comparing and discussing the relevant challenges, enablers, techniques as well as benefits. Moreover, the findings reveal the significance of the development of people in construction industry, besides processes and technology, as people are always subject of activities in construction while processes and technology are always objects.

The purpose of this paper is to analyze the incorporation, prioritization and depth of equity, diversity and inclusion (EDI) initiatives in tourism industry restart policies of Canadian provinces and territories. This study investigates how the detailing of EDI in policies determine the priority in emancipating tourism workers from the inequities exacerbated during the pandemic. Such investigation enables a better understanding of the complexities, tendencies and rationale of involving EDI in the tourism industry’s recovery.

The research investigated the presence and prioritization of equity, diversity, and inclusion using systematic text analytics of 38 publicly available restart plans and statements from 52 government and non-government agencies. Using web-based software Voyant Tools to assist in text analytics, a hybrid deductive-inductive coding approach was conducted.

Key outcomes from the analysis revealed scarce to no full and dedicated content on EDI as a holistic initiative necessary for tourism industry relaunch. This lack of EDI content was a result of the greater impetus to prioritize economic generation and limited data due to practical and ideological issues. Results also suggested the tokenizing of EDI in some policies.

Difficulties in data used for research include the lack and availability of restart policies specifically for tourism; most policies were generalized and referred to economic recovery as a whole. Studies of tourism-specific EDI issues were also limited.

The research is revelatory for investigating EDI prioritizations in restart policies even among well-developed and worker-diverse tourism industries such as in Canada, where inequities and injustices to women, Black, Indigenous, gender-diverse, and newcomer tourism workers among others have been withstanding.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

The main objective of the present research is to investigate the benefits of using geogrid reinforcement in minimizing the rate of deterioration of ballasted rail track geometry resting on soft clay and to explore the effect of load amplitude, load frequency, presence of geogrid layer in ballast layer and ballast layer thickness on the behavior of track system. These variables are studied both experimentally and numerically. This paper examines the effect of geogrid reinforced ballast laying on a layer of clayey soil as a subgrade layer, where a half full scale railway tests are conducted as well as a theoretical analysis is performed.

The experimental tests work consists of laboratory model tests to investigate the reduction in the compressibility and stress distribution induced in soft clay under a ballast railway reinforced by geogrid reinforcement subjected to dynamic load. Experimental model based on an approximate half scale for general rail track engineering practice is adopted in this study which is used in Iraqi railways. The investigated parameters are load amplitude, load frequency and presence of geogrid reinforcement layer. A half full-scale railway was constructed for carrying out the tests, which consists of two rails 800 mm in length with three wooden sleepers (900 mm × 90 mm × 90 mm). The ballast was overlying 500 mm thick clay layer. The tests were carried out with and without geogrid reinforcement, the tests were carried out in a well tied steel box of 1.5 m length × 1 m width × 1 m height. A series of laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, was measured in reinforced and unreinforced ballast cases. In addition to the laboratory tests, the application of numerical analysis was made by using the finite element program PLAXIS 3D 2013.

It was concluded that the settlement increased with increasing the simulated train load amplitude, there is a sharp increase in settlement up to the cycle 500 and after that, there is a gradual increase to level out between, 2,500 and 4,500 cycles depending on the load frequency. There is a little increase in the induced settlement when the load amplitude increased from 0.5 to 1 ton, but it is higher when the load amplitude increased to 2 ton, the increase in settlement depends on the geogrid existence and the other studied parameters. Both experimental and numerical results showed the same behavior. The effect of load frequency on the settlement ratio is almost constant after 500 cycles. In general, for reinforced cases, the effect of load frequency on the settlement ratio is very small ranging between 0.5 and 2% compared with the unreinforced case.

Increasing the ballast layer thickness from 20 cm to 30 cm leads to decrease the settlement by about 50%. This ascertains the efficiency of ballast in spreading the waves induced by the track.

The purpose of this study is to investigate the benefits and challenges of implementing circular economy (CE), as well as shed light on the influence of procurement strategy in CE implementation in construction projects.

A qualitative research approach with abductive reasoning was adopted. The empirical data were collected from the construction industry in the United Arab Emirates (UAE).

The results reveal that clients, consultants and contractors have limited awareness, knowledge and motivation to implement CE in construction projects. The absence of incentives to design projects following CE principles, lack of involvement of contractors and suppliers, non-use of materials that use CE principles and current procurement strategies are the main challenges for the implementation of CE in the UAE.

Previous research offers limited knowledge on CE and its implementation in construction projects particularly from a procurement strategy perspective. The findings of the study provide new knowledge of the benefits, challenges and role of procurement strategy for implementing CE. It is suggested that collaborative and partnering-based procurement methods are needed to facilitate the effective implementation of CE.

The aim of this paper is to analyse the role of communities of practice (CoP) as knowledge-sharing tools in family small and medium-sized enterprises (SMEs). In this context, CoPs that jointly involve family and non-family members are expected to act as knowledge-sharing tools.

This paper employs a multiple case study methodology, analysing the cases of six small companies in different sectors and countries over a period of 8 years. Both primary and secondary data are used.

The results show the role CoPs play in involving family and non-family members in empowering knowledge-sharing initiatives. A CoP's role in knowledge sharing depends on the presence (or lack) of a family leader, the leadership approach, the degree of cohesion around shared approaches and values within the CoP, and the presence of multiple generations at work.

This paper contributes to the literature on knowledge sharing in family businesses, by exploring for the first time the role of the CoP as a knowledge-sharing tool, depending on families' involvement in the CoP.