Search results

Awarding contracts based solely on the lowest price is unsuitable for every project. Consequently, most procurement systems in developed countries have progressed to the multicriteria selection practices (MSPs) for tender evaluation. MSPs consider a range of quality measures, such as completion time, life cycle cost, functional characteristics, environmental impact and innovation, alongside bid price. This study examines the prevailing MSPs in Sri Lankan public tender evaluations to enhance the effectiveness of the local tender evaluation process.

A desk study approach was employed to collect bidding documents, resulting in the identification of 66 documents. A systematic screening process was then applied to identify those bidding documents that incorporated MSPs. Subsequently, content analysis was conducted to determine the common features of the functions used in MSPs.

The study identified six primary functions related to MSPs incorporated in the bidding documents to procure building and substation projects. Three functions follow the price-to-quality method, while the remaining three follow the quality-to-price method. Among these identified functions, four functions employ objective evaluation criteria, such as thickness, capacity and operational loss. The other two functions utilize subjective evaluation criteria, such as the project’s design and technical specifications. Contract awarding will be based on either the highest score or the lowest bid, depending on the function type.

This study’s originality lies in exploring MSPs in the Sri Lankan public tender evaluation process and in disclosing their characteristics to promote the MSPs in Sri Lanka and developing countries.

This paper aims to compare the aging behavior of water-based coatings and solvent-based coatings in sulfuric acid environments and to discuss the related mechanism.

A sulfuric acid solution with a concentration of 5 Wt.% was selected for immersion test at 23°C. The failure behavior of the coating was studied by combining the transformation rules of the macroscopic morphology and basic properties with the results of electrochemical impedance spectrum analysis.

The results showed that the surface smoothness of the water-based coating was lower than that of the solvent-based coating. The glossiness, thickness and hardness of the water-based coating exhibited more significant changes. The electrochemical test also indicated that the water-based coating was infiltrated by a large number of corrosive media, which may have induced corrosion under the coating. In contrast, the solvent-based coating showed good shielding properties, but the adhesion was seriously affected by the corrosive medium.

This work clarified the difference of failure behavior and mechanism between water-based coatings and solvent-based coatings in acidic environment and provided a theoretical basis for the selection and mechanism research of anticorrosive coatings.

This study investigates the potential effectiveness of ChatGPT in enhancing the academic writing skills of Saudi EFL undergraduate students. It also examines the challenges associated with its use and suggests effective ways to address them in the education sector.

The study employed a sequential mixed-methods approach, which involved distributing questionnaires to gather data from students, followed by conducting semi-structured interviews with a purposeful selection of eight students and six teachers.

The findings revealed that students were generally satisfied with the effectiveness of ChatGPT in enhancing their academic writing skills. However, they also pinpointed some challenges associated with using ChatGPT, including plagiarism, overreliance, inadequate documentation, threats to academic integrity, and inaccurate information. To alleviate these challenges, effective strategies include deploying detection tools, equipping students and educators with training sessions, and revisiting academic policies and assessment methods. It is recommended that ChatGPT be used responsibly as an assistant tool, in conjunction with students' ideas and teachers' feedback. This approach can significantly enhance students' writing skills and facilitate completing their research projects and assignments.

ChatGPT can be a valuable tool in the educational landscape, but it is essential to use it judiciously. Therefore, teachers' effective integration of ChatGPT into their classrooms can significantly enhance students' writing abilities and streamline their research process.

This study contributes to recent AI-based research and provides practical insights on the responsible integration of ChatGPT into education while addressing potential challenges.

Traditional risk prioritization methods in Enterprise Risk Management (ERM) rely on precise data, which is often not available in real-world contexts. This study addresses the need for a robust model that can handle uncertain and imprecise information for more accurate risk assessment.

We propose a group decision-making approach using fuzzy numbers to represent risk attributes and preferences. These are converted into fuzzy risk scores through defuzzification, providing a reliable method for risk ranking.

The proposed fuzzy risk prioritization framework improves decision-making and risk awareness in businesses. It offers a more accurate and robust ranking of enterprise risks, enhancing control and performance in supply chain operations by effectively representing uncertainty and accommodating multiple decision-makers.

The adoption of this fuzzy risk prioritization framework can lead to significant improvements in enterprise risk management across various industries. By accommodating uncertainty and multiple decision-makers, organizations can achieve more reliable risk assessments, ultimately enhancing operational efficiency and strategic decision-making. This model serves as a guide for firms seeking to refine their risk management processes under conditions of imprecise information.

This study introduces a novel weighted fuzzy Risk Priority Number method validated in the risk management process of an integrated steel plant. It is the first to apply this fuzzy approach in the steel industry, demonstrating its practical effectiveness under imprecise information. The results contribute significantly to risk assessment literature and provide a benchmarking tool for improving ERM practices.

This paper aims to present a novel approach to facial recognition that enhances privacy by using radio frequency identification (RFID) technology combined with transformer models, eliminating the need for visual data and thus reducing privacy risks associated with traditional image-based systems.

The proposed RFID-transformer recognition system (RTRS) uses RFID technology to capture signal features such as phase and received signal strength indicator, which are then processed by a transformer model. The model is specifically designed to handle structured RFID data, capturing subtle patterns and dependencies to achieve accurate biometric recognition. The system’s performance was validated through comprehensive experiments involving different environmental conditions and user scenarios.

The experimental results demonstrate that the RTRS system achieves a recognition accuracy of 98.91%, maintaining robust performance across various challenging conditions, including low-light environments and changes in face orientation. In addition, the system provides a high level of privacy preservation by avoiding the collection and storage of visual data.

To the best of the authors’ knowledge, this work introduces the first RFID-based facial recognition system that fully leverages transformer models, offering a privacy-preserving alternative to traditional image-based methods. The system’s ability to perform accurately in diverse scenarios while ensuring user privacy makes it a significant advancement in biometric technology.

This article introduces SigBERT, a novel approach that fine-tunes bidirectional encoder representations from transformers (BERT) for the purpose of distinguishing between intact and impaired structures by analyzing vibration signals. Structural health monitoring (SHM) systems are crucial for identifying and locating damage in civil engineering structures. The proposed method aims to improve upon existing methods in terms of cost-effectiveness, accuracy and operational reliability.

SigBERT employs a fine-tuning process on the BERT model, leveraging its capabilities to effectively analyze time-series data from vibration signals to detect structural damage. This study compares SigBERT's performance with baseline models to demonstrate its superior accuracy and efficiency.

The experimental results, obtained through the Qatar University grandstand simulator, show that SigBERT outperforms existing models in terms of damage detection accuracy. The method is capable of handling environmental fluctuations and offers high reliability for non-destructive monitoring of structural health. The study mentions the quantifiable results of the study, such as achieving a 99% accuracy rate and an F-1 score of 0.99, to underline the effectiveness of the proposed model.

SigBERT presents a significant advancement in SHM by integrating deep learning with a robust transformer model. The method offers improved performance in both computational efficiency and diagnostic accuracy, making it suitable for real-world operational environments.

The anomaly detection task for oil and gas pipelines based on acoustic signals faces issues such as background noise coverage, lack of effective features, and small sample sizes, resulting in low fault identification accuracy and slow efficiency. The purpose of this paper is to study an accurate and efficient method of pipeline anomaly detection.

First, to address the impact of background noise on the accuracy of anomaly signals, the adaptive multi-threshold center frequency variational mode decomposition method(AMTCF-VMD) method is used to eliminate strong noise in pipeline signals. Secondly, to address the strong data dependency and loss of local features in the Swin Transformer network, a Hybrid Pyramid ConvNet network with an Agent Attention mechanism is proposed. This compensates for the limitations of CNN’s receptive field and enhances the Swin Transformer’s global contextual feature representation capabilities. Thirdly, to address the sparsity and imbalance of anomaly samples, the SpecAugment and Scaper methods are integrated to enhance the model’s generalization ability.

In the pipeline anomaly audio and environmental datasets such as ESC-50, the AMTCF-VMD method shows more significant denoising effects compared to wavelet packet decomposition and EMD methods. Additionally, the model achieved 98.7% accuracy on the preprocessed anomaly audio dataset and 99.0% on the ESC-50 dataset.

This paper innovatively proposes and combines the AMTCF-VMD preprocessing method with the Agent-SwinPyramidNet model, addressing noise interference and low accuracy issues in pipeline anomaly detection, and providing strong support for oil and gas pipeline anomaly recognition tasks in high-noise environments.

Based on the strong feature representation ability of the convolutional neural network (CNN), generous object detection methods in remote sensing (RS) have been proposed one after another. However, due to the large variation in scale and the omission of relevant relationships between objects, there are still great challenges for object detection in RS. Most object detection methods fail to take the difficulties of detecting small and medium-sized objects and global context into account. Moreover, inference time and lightness are also major pain points in the field of RS.

To alleviate the aforementioned problems, this study proposes a novel method for object detection in RS, which is called lightweight object detection with a multi-receptive field and long-range dependency in RS images (MFLD). The multi-receptive field extraction (MRFE) and long-range dependency information extraction (LDIE) modules are put forward.

To concentrate on the variability of objects in RS, MRFE effectively expands the receptive field by a combination of atrous separable convolutions with different dilated rates. Considering the shortcomings of CNN in extracting global information, LDIE is designed to capture the relationships between objects. Extensive experiments over public datasets in RS images demonstrate that our MFLD method surpasses the state-of-the-art methods. Most of all, on the NWPU VHR-10 dataset, our MFLD method achieves 94.6% mean average precision with 4.08 M model volume.

This paper proposed a method called lightweight object detection with multi-receptive field and long-range dependency in RS images.

The purpose of this study is to provide an overview of artificial intelligence (AI) in the talent management sphere. The study seeks to contribute to the body of knowledge with respect to human resource management and AI by conducting a literature review on the integration of AI in talent management, synthesising existing approaches and frameworks, as well as emphasising potential benefits.

The study adopts desk research, computational literature review (CLR) and uses topic modelling [with bidirectional encoder representations from transformers (BERTopic)] to throw light on the diffusion of AI in talent management.

The study’s main finding is that the area of AI in talent management is on the verge of gradual development and is in tandem with the growth of AI. We deduced that there is a link between talent management practices (planning, recruitment, compensation and rewards, performance management, employee empowerment, employee engagement and organisational culture) and AI. Though there are some known fears with regards to using the innovation, the benefits outweigh the demerits.

The current study has some limitations. The scope and size of the sample are the primary limitations of this study. No form of qualitative analytics was used in this study; as a result, the information obtained was limited. The study provides a snapshot of AI in talent management and contributes to the lack of literature in the joint fields. Also, the study provides practitioners and experts an overview of where to target investments and resources if need be.

The originality of this study comes from the combination of CLR methods and the use topic modelling with BERTopic which has not been used by previous reviews. In addition, the salient machine learning algorithms are identified in the study, which other studies have not identified.

Visually impaired people usually struggle with doing daily tasks due to a lack of visual cues. For image captioning assistive applications, most applications require an Internet connection for the image captioning generation function to work properly. In this study, we developed MyUEVision, an application that assists visually impaired people by generating image captions that can work with and without the Internet. This work also involves reviewing some image captioning models for this application.

The author has selected and experimented with three image captioning models for online models and two image captioning models for offline models. The user experience (UX) design was designed based on the problems faced by visually impaired users when using mobile applications. The application is developed for the Android platform, and the offline model is integrated into the application for the image captioning generation function to work offline.

After conducting experiments for selecting online and offline models, ExpansionNet V2 is chosen for the online model and VGG16 + long short-term memory (LSTM) is chosen for the offline model. The application is then developed and assessed, and the results show that the application can generate image captions with or without the Internet, providing the best result when having an Internet connection, and the image is captured in good lighting with a few objects.

MyUEVision stands out for its both online and offline functionality. This approach ensures the image captioning generator works with or without the Internet, setting it apart as a unique solution to address the needs of visually impaired individuals.