Search results
11 – 20 of over 2000Mazdak Ebadi, Negin Abbasi and Hamidreza Maghsoudi
This paper aims to propose an integrated protection scheme for converters of a low-power, low-cost photovoltaic system. Power electronic converters use a variety of methods to…
Abstract
Purpose
This paper aims to propose an integrated protection scheme for converters of a low-power, low-cost photovoltaic system. Power electronic converters use a variety of methods to limit overload and fault current. The use of insulated and non-insulated sensors along with additional circuits to detect and limit fault current can cause current to be limited or completely cut off before damage to semiconductor devices. In addition, fuses that have slower performance are used as backup for any type of protection.
Design/methodology/approach
First, all the candidate points for protection are investigated. In this paper, after examining the performance of glass fuses as linear resistors, they are used as a current feedback element. A simple, isolated and reliable circuit for fault detection at various points of the system has been proposed that can be implemented and operated in single shot or auto-reclose operating mode.
Findings
The experimental results of this circuit on a dc/dc converter and an H-bridge inverter show that it can cut off all instantaneous short circuit errors in less than 50 µs and prevent damage to the semiconductor switch.
Originality/value
In low-cost and low-power converters, it is usually not cost-effective to use complex and expensive devices. For this reason, these converters are more vulnerable to faults. On the other hand, in complex systems such as photovoltaics, several converters are used simultaneously in different parts, and the occurrence of a fault in each of them causes the whole system to fail.
Details
Keywords
Angela Najdoska and Goga Vladimir Cvetkovski
This paper presents the determination of the maximum power point of a bifacial photovoltaic (PV) system using two different cell models. The optimal power point is determined by…
Abstract
Purpose
This paper presents the determination of the maximum power point of a bifacial photovoltaic (PV) system using two different cell models. The optimal power point is determined by using genetic algorithm (GA), as an optimisation tool. The purpose of this paper is to find which of the two analysed models gives better results in the determination of the maximum power point of a bifacial PV system for different solar irradiations. The quality of the results gained from both models is analysed based on the value of the objective function.
Design/methodology/approach
In this research work, the maximum power point of bifacial PV modules is determined by using two different PV cell models, such as the simplified and two-diode models of PV cells. Based on the input electrical data for the analysed bifacial PV module as well as the mathematical model of the two PV cell presentations, the values for the current and the voltage at the maximum power point for a given solar irradiation and working temperature are determined by the algorithm for each solution in the population and generation.
Findings
From the presented results and the performed analysis, it can be concluded that GA is quite appropriate for this purpose and gives adequate results for both models and for all working conditions. The two-diode model was found to be more suitable compared with the simplified model due to its complexity. Therefore, although the power difference for each of the scenarios for the two compared models does not differ significantly among the two models, it is in favour of the two-diode model. Which implicates that the for fast and simple calculation the simplified model can also do the job.
Practical implications
This approach can be very successfully applied in the design process of a PV plant to forecast the output characteristics of the PV system if there is enough information about the weather conditions for a given location. This procedure can be very helpful in the process of selection of right PV module and inverter for a given location.
Originality/value
An optimisation technique using GA as an optimisation tool has been developed and successfully applied in the determination of the maximum power point for a bifacial PV module using to different models of solar cell. The results are compared with the analytically determined values as well as with the values given from the producer and they show good agreement.
Details
Keywords
Yong Li and Ruzhu Wang
This chapter will introduce three novel technologies demonstrated in Sino-Italian Green Energy Lab of Shanghai Jiao Tong University for the hot summer and cold winter climate zone.
Abstract
Purpose
This chapter will introduce three novel technologies demonstrated in Sino-Italian Green Energy Lab of Shanghai Jiao Tong University for the hot summer and cold winter climate zone.
Methodology/approach
Experimental and modeling works have been conducted on the application of these systems. A comprehensive review on the features of these novel technologies, their adaptability to local climate condition have been carried out, and some initial study results have been reported.
Findings
Solar PV direct-driven air conditioner with grid connection, home used small temperature difference heat pump, smart house energy information and control system are appropriate energy technologies with reduced CO2 emission, which can be applied efficiently in the hot summer and cold winter climate zone. More useful data will be obtained in the future demonstration tests in Sino-Italian Green Energy Lab.
Originality/value
This work shows combining renewable energy technologies and information technologies is crucial to improve the energy efficiency and the comfortableness for indoor environment.
Details
Keywords
Vahid Zahedi Rad, Abbas Seifi and Dawud Fadai
This paper aims to develop a causal feedback structure that explains the dynamics of entrepreneurship development in Iran’s photovoltaic (PV) technological innovation system (TIS…
Abstract
Purpose
This paper aims to develop a causal feedback structure that explains the dynamics of entrepreneurship development in Iran’s photovoltaic (PV) technological innovation system (TIS) to design effective policy interventions for fostering PV innovation.
Design/methodology/approach
This study adopts the system dynamics approach to develop the causal structure model. The methodology follows a systematic method to elicit the causal structure from qualitative data gathered by interviewing several stakeholders with extensive knowledge about different aspects of Iran’s PV TIS.
Findings
Lack of technological knowledge and financial resources within Iranian PV panel-producing firms are the main barriers to entrepreneurship development in Iran’s PV TIS. This study proposes two policy enforcement mechanisms to tackle these problems. The proposed feedback mechanisms contribute to the domestic PV market size and knowledge transfer from public research organizations to the PV industry.
Practical implications
The proposed policy mechanisms aid Iranian policymakers in designing effective policy interventions stimulating innovation in Iran’s PV industry.
Originality/value
The main contributions of this study include conceptualizing the causal structure capturing entrepreneurship dynamics in emerging PV TIS and proposing policy mechanisms fostering entrepreneurship and innovation in PV sectors.
Details
Keywords
Jenitha R. and K. Rajesh
The main purpose of this controller is to carryout irrigation by the farmers with renewable energy resources.
Abstract
Purpose
The main purpose of this controller is to carryout irrigation by the farmers with renewable energy resources.
Design/methodology/approach
The proposed design includes the Deep learning based intelligent stand-alone energy management system used for irrigation purpose. The deep algorithm applied here is Radial basis function neural network which tracks the maximum power, maintains the battery as well as load system.
Findings
The Radial Basis Function Neural Network algorithm is used for carrying out the training process. In comparison with other conventional algorithms, this algorithm outperforms by higher efficiency and lower tracking time without oscillation.
Research limitations/implications
It is little complex to implement the hardware setup of neural network in terms of training process but the work is under progress.
Practical implications
The practical hardware implementation is under progress.
Social implications
If controller are implemented in a real-time environment, definitely it helps the human-less farming and irrigation process.
Originality/value
If this system is implemented in real-time environment, every farmer gets benefitted.
Details
Keywords
Jaya Choudhary, Mangey Ram and Ashok Singh Bhandari
This research introduces an innovation strategy aimed at bolstering the reliability of a renewable energy resource, which is hybrid energy systems, through the application of a…
Abstract
Purpose
This research introduces an innovation strategy aimed at bolstering the reliability of a renewable energy resource, which is hybrid energy systems, through the application of a metaheuristic algorithm. The growing need for sustainable energy solutions underscores the importance of integrating various energy sources effectively. Concentrating on the intermittent characteristics of renewable sources, this study seeks to create a highly reliable hybrid energy system by combining photovoltaic (PV) and wind power.
Design/methodology/approach
To obtain efficient renewable energy resources, system designers aim to enhance the system’s reliability. Generally, for this purpose, the reliability redundancy allocation problem (RRAP) method is utilized. The authors have also introduced a new methodology, named Reliability Redundancy Allocation Problem with Component Mixing (RRAP-CM), for optimizing systems’ reliability. This method incorporates heterogeneous components to create a nonlinear mixed-integer mathematical model, classified as NP-hard problems. We employ specially crafted metaheuristic algorithms as optimization strategies to address these challenges and boost the overall system performance.
Findings
The study introduces six newly designed metaheuristic algorithms. Solve the optimization problem. When comparing results between the traditional RRAP method and the innovative RRAP-CM method, enhanced reliability is achieved through the blending of diverse components. The use of metaheuristic algorithms proves advantageous in identifying optimal configurations, ensuring resource efficiency and maximizing energy output in a hybrid energy system.
Research limitations/implications
The study’s findings have significant social implications because they contribute to the renewable energy field. The proposed methodologies offer a flexible and reliable mechanism for enhancing the efficiency of hybrid energy systems. By addressing the intermittent nature of renewable sources, this research promotes the design of highly reliable sustainable energy solutions, potentially influencing global efforts towards a more environmentally friendly and reliable energy landscape.
Practical implications
The research provides practical insights by delivering a comprehensive analysis of a hybrid energy system incorporating both PV and wind components. Also, the use of metaheuristic algorithms aids in identifying optimal configurations, promoting resource efficiency and maximizing reliability. These practical insights contribute to advancing sustainable energy solutions and designing efficient, reliable hybrid energy systems.
Originality/value
This work is original as it combines the RRAP-CM methodology with six new robust metaheuristics, involving the integration of diverse components to enhance system reliability. The formulation of a nonlinear mixed-integer mathematical model adds complexity, categorizing it as an NP-hard problem. We have developed six new metaheuristic algorithms. Designed specifically for optimization in hybrid energy systems, this further highlights the uniqueness of this approach to research.
Details
Keywords
Hanen Mejbri, Kaiçar Ammous, Slim Abid, Hervé Morel and Anis Ammous
– This paper aims to focus on the trade-off between losses and converter cost.
Abstract
Purpose
This paper aims to focus on the trade-off between losses and converter cost.
Design/methodology/approach
The continual development of power electronic converters, for a wide range of applications such as renewable energy systems (interfacing photovoltaic panels via power converters), is characterized by the requirements for higher efficiency and lower production costs. To achieve such challenging objectives, a computer-aided design optimization based on genetic algorithms is developed in Matlab environment. The elitist non-dominated sorting genetic algorithm is used to perform search and optimization, whereas averaged models are used to estimate power losses in different semiconductors devices. The design problem requires minimizing the losses and cost of the boost converter under electrical constraints. The optimization variables are, as for them, the switching frequency, the boost inductor, the DC capacitor and the types of semiconductor devices (IGBT and MOSFET). It should be pointed out that boost topology is considered in this paper but the proposed methodology is easily applicable to other topologies.
Findings
The results show that such design methodology for DC-DC converters presents several advantages. In particular, it proposes to the designer a set of solutions – as an alternative of a single one – so that the authors can choose a posteriori the adequate solution for the application under consideration. This then allows the possibility of finding the best design among all the available choices. Furthermore, the design values for the selected solution were obtainable components.
Originality/value
The authors focus on the general aspect of the discrete optimization approach proposed here. It can also be used by power electronics designers with the help of additional constraints in accordance with their specific applications. Furthermore, the use of such non-ideal average models with the multi-objective optimization is the original contribution of the paper and it has not been suggested so far.
Details
Keywords
R. Le Goff Latimier, B. Multon and H. Ben Ahmed
To foster the grid integration of both electric vehicles (EV) and renewable generators, the purpose of this paper is to investigate the possible synergies between these players so…
Abstract
Purpose
To foster the grid integration of both electric vehicles (EV) and renewable generators, the purpose of this paper is to investigate the possible synergies between these players so as to jointly improve the production predictability while ensuring a green mobility. It is here achieved by the mean of a grid commitment over the overall power produced by a collaborative system which here gathers a photovoltaic (PV) plant with an EV fleet. The scope of the present contribution is to investigate the conditions to make the most of such an association, mainly regarding to the management strategies and optimal sizing, taking into account forecast errors on PV production.
Design/methodology/approach
To evaluate the collaboration added value, several concerns are aggregated into a primary energy criterion: the commitment compliance, the power spillage, the vehicle charging, the user mobility and the battery aging. Variations of these costs are computed over a range of EV fleet size. Moreover, the influence of the charging strategy is specifically investigated throughout the comparison of three managements: a simple rule of thumb, a perfect knowledge deterministic case and a charging strategy computed by stochastic dynamic programming. The latter is based on an original modeling of the production forecast error. This methodology is carried out to assess the collaboration added value for two operators’ points of view: a virtual power plant (VPP) and a balance responsible party (BRP).
Findings
From the perspective of a BRP, the added value of PV-EV collaboration for the energy system has been evidenced in any situation even when the charging strategy is very simple. On the other hand, for the case of a VPP operator, the coupling between the optimal sizing and the management strategy is highlighted.
Originality/value
A co-optimization of the sizing and the management of a PV-EV collaborative system is introduced and the influence of the management strategy on the collaboration added value has been investigated. This gave rise to the presentation and implementation of an original modeling tool of the PV production forecast error. Finally, to widen the scope of application, two different business models have been tackled and compared.
Details
Keywords
Zakaria Mohamed Salem Elbarbary and Mohamed Abdullrahman Alranini
Silicon photovoltaics technology has drawbacks of high cost and power conversion efficiency. In order to extract the maximum output power of the module, maximum power point (MPP…
Abstract
Purpose
Silicon photovoltaics technology has drawbacks of high cost and power conversion efficiency. In order to extract the maximum output power of the module, maximum power point (MPP) is used by implying the nonlinear behavior of I-V characteristics. Different techniques are used regarding maximum power point tracking (MPPT). The paper aims to review the techniques of MPPT used in PV systems and review the comparison between Perturb and Observe (P&O) method and incremental conductance (IC) method that are used to track the maximum power and gives a comparative review of all those techniques.
Design/methodology/approach
A study of MPPT techniques for photovoltaic (PV) systems is presented. Matlab Simulink is used to find the MPP using P&O simulation along with IC simulation at a steady temperature and irradiance.
Findings
MATLAB simulations are used to implement the P&O method and IC method, which includes a PV cell connected to an MPPT-controlled boost converter. The simulation results demonstrate the accuracy of the PV model as well as the functional value of the algorithms, which has improved tracking efficiency and dynamic characteristics. P&O solution gave 94% performance when configured. P&O controller has a better time response process. As compared to the P&O method of tracking, the incremental conductance response rate was significantly slower.
Originality/value
In PV systems, MPPT techniques are used to optimize the PV array output power by continuously tracking the MPP under a variety of operating conditions, including cell temperature and irradiation level.
Details
Keywords
Karthick R., Ramakrishnan C. and Sridhar S.
This paper aims to introduce the quasi impedance source inverter (qZSI)-based static compensator (STATCOM), which is incorporated into the hybrid distributed power generation…
Abstract
Purpose
This paper aims to introduce the quasi impedance source inverter (qZSI)-based static compensator (STATCOM), which is incorporated into the hybrid distributed power generation system for enhancement of power quality. The distributed power generation system includes the photovoltaic (PV), wind energy conversion system (WECS) and battery energy storage system.
Design/methodology/approach
The WECS is used by the self-excited induction generator (SEIG) and the flywheel energy storage system (FESS). To regulate its terminal voltage and frequency, the SEIG requires adjustable volt-ampere reactive (VAR). A combination of a STATCOM and a fixed condenser bank usually serves to satisfy the VAR demand. The maximum correntropy criterion-based adaptive filter technique (AFT) is proposed to control the qZSI-STATCOM and to guarantee that the voltage at the SEIG terminal is harmonic-free while providing non-linear three-phase and single-phase loads.
Findings
The coordinated operation of the suggested voltage control and flywheel control systems ensures that load voltage and frequency are retained in their respective values at very low harmonic distortions regardless of wind speed and load variation. The simulation and experimental studies are carried out under different load conditions to validate the efficiencies of the PV-assisted STATCOM.
Originality/value
To improve system stability and minimize total costs, extra load current sensors can also be avoided. This paper proposes to control the SEIG terminal voltage and harmonic elimination in the standalone WECS systems using maximum correntropy criterion-based AFT with a fuzzy logic controller.
Details