Search results

The COVID-19 pandemic dramatically affected the fire service: stay-at-home orders and potential exposure hazards disrupted standard fire service operations and incident patterns. The ability to predict incident volume during such disruptions is crucial for dynamic and efficient staff allocation planning. This work proposes a model to quantify the relationship between the increase in “residential mobility” (i.e. time spent at home) due to COVID-19 and fire and emergency medical services (EMS) call volume at the onset of the pandemic (February – May 2020). Understanding this relationship is beneficial should mobility disruptions of this scale occur again.

The analysis was run on 56 fire departments that subscribe to the National Fire Operations Reporting System (NFORS). This platform enables fire departments to report and visualize operational data. The model consists of a Bayesian hierarchical model. Text comments reported by first responders were also analyzed to provide additional context for the types of incidents that drive the model’s results.

Overall, a 1% increase in residential mobility (i.e. time spent at home) was associated with a 1.43% and 0.46% drop in EMS and fire call volume, respectively. Around 89% and 21% of departments had a significant decrease in EMS and fire call volume, respectively, as time spent at home increased.

A few papers have investigated the impact of COVID-19 on fire incidents in a few locations, but none have covered an extensive number of fire departments. Additionally, no studies have investigated the relationship between mobility and fire department call volumes.

The paper examines the impact of market power on wages within the context of a developing country, focusing on Brazil.

With access to matched employer–employee data from Brazil, we first characterized the evolution of the local labor market concentration (Municipality Herfindahl–Hirschman Index [HHI]). Then, we built a fixed-effect model with instrumental variables to verify the association between the local labor market concentration and wages. Finally, a difference-in-difference (DiD) was implemented to verify whether a merger transaction impacted the workers’ earnings in the Brazilian banking sector.

The paper’s findings suggest that there may be a negative relationship between market power and workers’ earnings.

This research conducted an in-depth investigation of the labor market power in a developing country. As far as we know, our work is the first to evaluate the extension of local concentration in Brazilian formal labor markets and to illustrate its evolution over the last decades. Additionally, when going through the effects of market concentration on wages, we use a new identification strategy that explores changes in the HHI that are caused by national trends in an industry as a source of exogenous variation. Finally, the last part of the paper assesses the effects of antitrust policy on the labor market, a kind of investigation that is still scarce.

This study aims to validate the linear flow theory with computational fluid dynamics (CFD) simulations and to propose a novel shape for the airfoil that will improve supersonic aerodynamic performance compared to the National Advisory Committee for Aeronautics (NACA) 64a210 airfoil.

To design the new airfoil shape, this study uses a convex optimization approach to obtain a global optimal shape for an airfoil. First, modeling is conducted using linear flow theory, and then numerical verification is done by CFD simulations using ANSYS Fluent. The optimization process ensures that the new airfoil maintains the same cross-sectional area and thickness as the NACA 64a210 airfoil. This study found that an efficient way to obtain the ideal airfoil shape is by using linear flow theory, and the numerical simulations supported the assumptions inherent in the linear flow theory.

This study’s findings show notable improvements (from 4% to 200%) in the aerodynamic performance of the airfoil, especially in the supersonic range, which points to the suggested airfoil as a potential option for several fighter aircraft. Under various supersonic conditions, the optimized airfoil exhibits improved lift-over-drag ratios, leading to improved flight performance and lower fuel consumption.

This study was conducted mainly for supersonic flow, whereas the subsonic flow is tested for a Mach number of 0.7. This study would be extended for both subsonic and supersonic flights.

Convex optimization and linear flow theory are combined in this work to create an airfoil that performs better in supersonic conditions than the NACA 64a210. By closely matching the CFD results, the linear flow theory's robustness is confirmed. This means that the initial design phase no longer requires extensive CFD simulations, and the linear flow theory can be used quickly and efficiently to obtain optimal airfoil shapes.

The proposed airfoil can be used in different fighter aircraft to enhance performance and reduce fuel consumption. Thus, lower carbon emission is expected.

The unique aspect of this work is how convex optimization and linear flow theory were combined to create an airfoil that performs better in supersonic conditions than the NACA 64a210. Comprehensive CFD simulations were used for validation, highlighting the optimization approach's strength and usefulness in aerospace engineering.

The purpose of this paper is to reshape a fast-jet electronics pod’s external geometry to ensure compliance with aircraft pylon load limits across its carriage envelope while adhering to onboard system constraints and fitment specifications.

Initial geometric layout determination used empirical methods. Performance approximation on the aircraft with added fairings and stabilising fin configurations was conducted using a panel code. Verification of loads was done using a full steady Reynolds-averaged Navier–Stokes solver, validated against published wind tunnel test data. Acceptable load envelope for the aircraft pylon was defined using two already-certified stores with known flight envelopes.

Re-lofting the pod’s geometry enabled meeting all geometric and pylon load constraints. However, due to the pod's large size, re-lofting alone was not adequate to respect aircraft/pylon load limitations. A flight restriction was imposed on the aircraft’s roll rate to reduce yaw and roll moments within allowable limits.

The geometry of an electronics pod was redesigned to maximise the permissible flight envelope on its carriage aircraft while respecting the safe carriage load limits determined for its store pylon. Aircraft carriage load constraints must be determined upfront when considering the design of fast-jet electronic pods.

A process for determining the unknown load constraints of a carriage aircraft by analogy is presented, along with the process of tailoring the geometry of an electronics pod to respect aerodynamic load and geometric constraints.

This paper seeks to explore the sensitivity of these parameters and their impact on fiscal policy outcomes. We use the existing literature to establish possible ranges for each parameter, and we examine how changes within these ranges can alter the outcomes of fiscal policy. In this way, we aim to highlight the importance of these parameters in the formulation and evaluation of fiscal policy.

The role of fiscal policy, its effects and multipliers continues to be a subject of intense debate in macroeconomics. Despite adopting a New Keynesian approach within a macroeconomic model, the reactions of macroeconomic variables to fiscal shocks can vary across different contexts and theoretical frameworks. This paper aims to investigate these diverse reactions by conducting a sensitivity analysis of parameters. Specifically, the study examines how key variables respond to fiscal shocks under different parameter settings. By analyzing the behavioral dynamics of these variables, this research contributes to the ongoing discussion on fiscal policy. The findings offer valuable insights to enrich the understanding of the complex relationship between fiscal shocks and macroeconomic outcomes, thus facilitating informed policy debates.

This paper aims to investigate key elements of New Keynesian Dynamic Stochastic General Equilibrium (DSGE) models. The focus is on the calibration of parameters and their impact on macroeconomic variables, such as output and inflation. The study also examines how different parameter settings affect the response of monetary policy to fiscal measures. In conclusion, this study has relied on theoretical exploration and a comprehensive review of existing literature. The parameters and their relationships have been analyzed within a robust theoretical framework, offering valuable insights for further research on how these factors influence model forecasts and inform policy recommendations derived from New Keynesian DSGE models. Moving forward, it is recommended that future work includes empirical analyses to test the reliability and effectiveness of parameter calibrations in real-world conditions. This will contribute to enhancing the accuracy and relevance of DSGE models for economic policy decision-making.

This study is motivated by the aim to provide a deeper understanding of the roles macroeconomic model parameters play concerning responses to expansionary fiscal policies and the subsequent reactions of monetary authorities. Comprehensive reviews that encompass this breadth of relationships within a single text are rare in the literature, making this work a valuable contribution to stimulating discussions on macroeconomic policies.

This study aims to propose and evaluate the progress in the basic-pixel (a strategy to generate continuous trajectories that fill out the entire surface) algorithm towards performance gain. The objective is also to investigate the operational efficiency and effectiveness of an enhanced version compared with conventional strategies.

For the first objective, the proposed methodology is to apply the improvements proposed in the basic-pixel strategy, test it on three demonstrative parts and statistically evaluate the performance using the distance trajectory criterion. For the second objective, the enhanced-pixel strategy is compared with conventional strategies in terms of trajectory distance, build time and the number of arcs starts and stops (operational efficiency) and targeting the nominal geometry of a part (operational effectiveness).

The results showed that the improvements proposed to the basic-pixel strategy could generate continuous trajectories with shorter distances and comparable building times (operational efficiency). Regarding operational effectiveness, the parts built by the enhanced-pixel strategy presented lower dimensional deviation than the other strategies studied. Therefore, the enhanced-pixel strategy appears to be a good candidate for building more complex printable parts and delivering operational efficiency and effectiveness.

This paper presents an evolution of the basic-pixel strategy (a space-filling strategy) with the introduction of new elements in the algorithm and proves the improvement of the strategy’s performance with this. An interesting comparison is also presented in terms of operational efficiency and effectiveness between the enhanced-pixel strategy and conventional strategies.