Search results

This study aims to comprehensively analyze the intersection of technology management and innovation management amidst the fourth industrial revolution, uncovering evolving trends and influential contributors.

Using the Bibliometrix R-package, this pioneering research conducts a bibliometric analysis to delve into innovation and technology management literature, quantifying scholarly output and identifying thematic breakthroughs.

The study reveals quantitative insights into the progression of innovation and technology management research, offering guidance on evolving trends, thematic breakthroughs and influential contributors.

The findings offer valuable insights for practitioners and managers, guiding them through emerging trends and recommending a dual focus on fundamental principles and emerging areas for strategic decision-making.

By fostering active engagement with evolving trends, this research contributes to the ongoing technology and innovation management discourse, potentially leading to societal benefits and advancements.

This study pioneers an in-depth bibliometric analysis at the intersection of innovation and technology management, offering unique insights and quantitative assessments of scholarly output and thematic trends, thus adding significant value to the existing literature.

The purpose of this study is to experimentally determine whether mechanical properties of concrete can be improved by using olive pomace aggregates (OPA) as a substitute for natural sand. Two types of OPA were tested by replacing an equivalent amount of natural sand. The first type was OPA mixed with olive mill wastewater (OMW), and the second type was OPA not mixed with OMW. For each type, two series of concrete were produced using OPA in both dry and saturated states. The percentage of partial substitution of natural sand by OPA varied from 0% to 15%.

The addition of OPA leads to a reduction in the dry density of hardened concrete, causing a 5.69% decrease in density when compared to the reference concrete. After 28 days, ultrasonic pulse velocity tests indicated that the resulting material is of good quality, with a velocity of 4.45 km/s. To understand the mechanism of resistance development, microstructural analysis was conducted to observe the arrangement of OPA and calcium silicate hydrates within the cementitious matrix. The analysis revealed that there is a low level of adhesion between the cement matrix and OPA at interfacial transition zone level, which was subsequently validated by further microstructural analysis.

The laboratory mechanical tests indicated that the OPCD_OPW (5) sample, containing 5% of OPA, in a dry state and mixed with OMW, demonstrated the best mechanical performance compared to the reference concrete. After 28 days of curing, this sample exhibited a compressive strength (R_c) of 25 MPa. Furthermore, it demonstrated a tensile strength of 4.61 MPa and a dynamic modulus of elasticity of 44.39 GPa, with rebound values of 27 MPa. The slump of the specimens ranged from 5 cm to 9 cm, falling within the acceptable range of consistency (Class S2). Based on these findings, the OPCD_OPW (5) formulation is considered optimal for use in concrete production.

This research paper provides a valuable contribution to the management of OPA and OMW (OPA_OMW) generated from the olive processing industry, which is known to have significant negative environmental impacts. The paper presents an intriguing approach to recycling these materials for use in civil engineering applications.

This study examines the impact of perceived human resource management practices on talent turnover intention, with work engagement mediating and self-efficacy moderating the relationship. It examines how employees' perceptions of pay satisfaction, empowerment, participation and communication are related to their turnover intentions.

A total of 283 valid questionnaires from UAE government employees were used for data analysis. Partial least squares structural equation modeling (PLS-SEM) was used to examine the proposed hypothesis.

The results reveal that employees' perceptions of pay satisfaction, empowerment, participation and communication are significant contributors to work engagement. The findings further demonstrate that work engagement significantly negatively affects talent turnover intention and acts as a mediator between employees' perceptions of individual human resource management practices and talent turnover intention. However, the results contradict the hypothesis that self-efficacy moderates the association between work engagement and talent turnover intention.

This study focuses on the impact of perceived human resource management practices on talent turnover intention, an area that has received limited attention in literature. By focusing on perceived human resource management practices, this study illuminates employees' subjective experiences and how they perceive human resource management practices intended to reduce talent turnover intention. The inclusion of the mediating effect of work engagement offers a more profound understanding of how employees' perceptions of human resource management practices influence their turnover intentions. This comprehensive approach to understanding the interplay between these variables provides valuable insights for organizations seeking to improve their human resource management practices and talent turnover intention.

Although trade volumes in e-retailing have increased significantly in recent years, logistics service failures are inevitable, especially at the delivery stage. Therefore, it is essential to provide customers with effective recovery strategies to increase their satisfaction and repurchase intentions. There is a lack of empirical evidence on whether the response time or the discount offered in compensation is more crucial for customers. Therefore, this study aims to determine whether the response time or the discount offered for high and low criticality failures has a greater impact on customer satisfaction levels and repurchase intentions for female and male customers.

A scenario-based experimental design method has been adopted to collect data, and 697 participants aged 18 and 58 years have been reached. The research utilized a between-subjects design, incorporating three factors: gender (female vs male), criticality (high vs low) and compensation (7 days: 10% discount, 10 days: 20% discount and 14 days: 30% discount). Six scenarios depicting the failure of an online retailer were created, and factorial univariate ANOVA was conducted to test the hypotheses.

The study's results show that in terms of customer satisfaction, female customers attach more importance to the response time in the case of high criticality and the amount of discount offered in the case of low criticality. On the other hand, male customers give more importance to the response time in terms of customer satisfaction when they experience a high or low criticality failure. In the case of low criticality, response time is more important for male customers to increase their repurchase intentions, while the amount of the discount is more important for female customers.

The study demonstrates the relative importance of the response time and discount amount according to the criticality level of failures and to guide business managers in terms of the recovery strategies they will implement. It focuses on gender differences and determine whether the response time or discount amount is more important for male and female customers in high or low-criticality situations.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

Abnormal behaviors such as rework, backlog, changes and claims generated by project organizations are unavoidable in complex projects. When abnormal behaviors emerge, the previously normal state of interactions between organizations will be altered to some extent. However, previous studies have ignored the associations and interactions between organizations in the context of abnormal organizational behaviors (AOBs), making this challenging to cope with AOBs. As a result, the objective of this paper is to explore how to reduce AOBs in complex projects at the organizational level from a network perspective.

To overcome the inherent limitations of a single case study, this research integrated two data collection methods: questionnaire survey and expert scoring method. The questionnaire survey captured the universal data on the influence possibility of AOBs between complex project organizations and the expert scoring method got the influence probability scores of AOBs between organizations in the case. Using these data, four organizational influence network models of AOBs based on a case were developed to demonstrate how to destroy AOBs networks in complex projects using network attack theory (NAT).

First, the findings show that controlling AOBs generated by key organizations preferentially and improving the ability of key organizations can weaken AOBs network, enabling more effective coping strategies. Second, the owners, government, material suppliers and designers are identified as key organizations across all four influence networks of AOBs. Third, change and claim behaviors are more manageable from the organizational level.

Project managers can target specific organizations for intervention, weaken the AOBs network by applying NAT and achieve better project outcomes through coping strategies. Additionally, by taking a network perspective, this research provides a novel approach to comprehending the associations and interactions between organizations in the context of complex projects.

This paper proposes a new approach to investigating AOBs in complex projects by simultaneously examining rework, backlog, change and claim. Leveraging NAT as a novel tool for managing the harmful effects of influence networks, this study extends the knowledge body in the field of organizational behavior (OB) management and complex project management.