Search results

The purpose of this paper is to obtain the optimal N₂/Ar ratio parameters for preparing Ta (C, N) coating. Three coatings with different N₂/Ar ratios were prepared on the TA15 substrate, and their effects on the wear properties of the coatings were discussed.

Ta(C, N) coatings with three different N₂/Ar ratios were prepared on TA15 substrates using the double cathode glow metallurgical plasma alloying technique (DGMPA) using a step-by-step diffusion method.

With the increase of N₂/Ar flow ratio, the hardness and elastic modulus of the coating first increase and then decrease. Compared with the S1 sample (N₂/Ar gas ratio 25: 75) and the S3 sample (N₂/Ar gas ratio 75: 25), the S2 sample (N₂/Ar gas ratio 50: 50) has better mechanical properties, with hardness increased by 48.45% and 6.8%, respectively, and elastic strain ratio increased by 22.8% and 28.5%, respectively. Moreover, the wear degree of the S2 sample is less than other samples. The wear rate of the S2 sample was 32.4% lower than the S3 sample at 300°C and 14.3% lower than the S3 sample at 500°C. Therefore, the S2 sample has the best mechanical properties and the best high temperature wear resistance.

Ta(C, N) coatings were prepared by DGMPA technology, and the wear mechanism of Ta(C, N) coatings with different N₂/Ar ratios was investigated to reduce the wear rate.

This study aims to the service life of TA15 alloy by solving the problem of the binding force between the matrix and AlTiSiN coating. The effect of a plasma nitriding (PN) interlayer on the magnetron-sputtered AlTiSiN coating was also investigated in detail.

The double-glow plasma alloying (DGPA) and magnetron sputtering (MS) techniques were combined as a new approach to realize a bilayer on TA15 consisting of an AlTiSiN layer with a PN interlayer. A TiN interlayer was formed via co-diffusion during the PN conducted at 1050°C for 3 h.

The PN interlayer can effectively improve the adhesion between coating and matrix; the PN/AlTiSiN coating presented excellent adhesion (80.1 N) and anti-wear property with a nano-hardness of 18.62 GPa. The resulting three-dimensional wear-track morphology exhibited a shallow depth and a narrow width.

The novel combination of the DGPA and MS technologies, using an infiltration layer rather than a coating one as the intermediate layer, can effectively enhance the adhesion between AlTiSiN coating and TA15 matrix. Meanwhile, the gradient layer can effectively improve both surface bearing and wear resistance.

Sentiment lexicon is an essential resource for sentiment analysis of user reviews. By far, there is still a lack of domain sentiment lexicon with large scale and high accuracy for Chinese book reviews. This paper aims to construct a large-scale sentiment lexicon based on the ultrashort reviews of Chinese books.

First, large-scale ultrashort reviews of Chinese books, whose length is no more than six Chinese characters, are collected and preprocessed as candidate sentiment words. Second, non-sentiment words are filtered out through certain rules, such as part of speech rules, context rules, feature word rules and user behaviour rules. Third, the relative frequency is used to select and judge the polarity of sentiment words. Finally, the performance of the sentiment lexicon is evaluated through experiments.

This paper proposes a method of sentiment lexicon construction based on ultrashort reviews and successfully builds one for Chinese books with nearly 40,000 words based on the Douban book.

Compared with the idea of constructing a sentiment lexicon based on a small number of reviews, the proposed method can give full play to the advantages of data scale to build a corpus. Moreover, different from the computer segmentation method, this method helps to avoid the problems caused by immature segmentation technology and an imperfect N-gram language model.