Search results

The noise and dust particles caused by the construction transport are by most stakeholders experienced as disturbing. The purpose of this study is to explore how sonification can support visualization in construction planning to decrease construction transport disturbances.

This paper presents an interdisciplinary research project, combining research on construction logistics, internet of things and sonification. First, a data recording device, including sound, particle, temperature and humidity sensors, was implemented and deployed in a development project. Second, the collected data were used in a sonification design, which was, third, evaluated with potential users.

The results showed that the low-cost sensors used could capture “good enough” data, and that the use of sonification for representing these data is interesting and a possible useful tool in urban and construction transport planning.

There is a need to further evolve the sonification design and better communicate the aim of the sounds used to potential users. Further testing is also needed.

This study introduces new ideas of how to support visualization with sonification planning the construction work and its impact on the vicinity of the site. Currently, urban planning and construction planning focus on visualizing the final result, with little focus on how to handle disturbances during the construction process.

Showing the potentials of using low-cost sensor data in sonification, and using sonification together with visualization, is the result of a novel interdisciplinary research area combination.

The purpose of this study is to introduce a matching function approach to analyze matching in financial reporting.

The matching function is first analyzed analytically. It is specified as a multiplicative Cobb-Douglas-type function of three categories of expenses (labor expense, material expense and depreciation). The specified matching function is solved by the generalized reduced gradient method (GRG) for 10-year time series from 8,226 Finnish firms. The coefficient of determination of the logarithmic model (CODL) is compared with the linear revenue-expense correlation coefficient (REC) that is generally used in previous studies.

Empirical evidence showed that REC is outperformed by CODL. CODL was found independent of or weakly negatively dependent on the matching elasticity of labor expense, positively dependent on the material expense elasticity and negatively dependent on depreciation elasticity. Therefore, the differences in matching accuracy between industries emphasizing different expense categories are significant.

The matching function is a general approach to assess the matching accuracy but it is in this study specified multiplicatively for three categories of expenses. Moreover, only one algorithm is tested in the empirical estimation of the function. The analysis is concentrated on ten-year time-series of a limited sample of Finnish firms.

The matching function approach provides a large set of important information for considering the matching process in practice. It can prove a useful method also to accounting standard-setters and other specialists such as managers, consultants and auditors.

This study is the first study to apply the new matching function approach.

This study aims to examine activity-related sound levels and pupils’ perceptions of the acoustic environment in two classrooms, one of which was a traditional classroom (Reference classroom, reverberation time (RT) 0.54 s) and the other a refurbished classroom (Demo classroom, RT 0.32 s).

Three types of data were gathered: room acoustic measurements, activity sound levels during different activities and pupils’ subjective experience concerning factors related to acoustics. Pupils, 10–11 years old (N = 34), estimated their subjective experience in general and after four test lessons. Teachers planned the test lessons to have four different lesson types: quiet work, one-person speaking, group work and activity-based work. The sound levels of activities were measured during the test lessons.

The activity sound levels were 2–13 dB L_Aeq lower in the Demo classroom than in the Reference classroom, depending on lesson type. Pupils were less annoyed by noise in the Demo than in the Reference classroom. Pupils’ speech was the most annoying sound source. More pupils were annoyed by it in the Reference classroom (65%) than in the Demo classroom (15%). Hearing the teacher while not seeing her face, concentrating on teaching and sitting in one’s place were estimated easier in the Demo classroom than in the Reference classroom.

This study offers a new approach using test lessons for studying activity sounds in schools. Activity sounds and their annoyance can be significantly diminished by classroom refurbishments.

This study aims to explore the formation mechanism of aerodynamic noise of a high-speed maglev train and understand the characteristics of dipole and quadrupole sound sources of the maglev train at different speed levels.

Based on large eddy simulation (LES) method and Kirchhoff–Ffowcs Williams and Hawkings (K-FWH) equations, the characteristics of dipole and quadrupole sound sources of maglev trains at different speed levels were simulated and analyzed by constructing reasonable penetrable integral surface.

The spatial disturbance resulting from the separation of the boundary layer in the streamlined area of the tail car is the source of aerodynamic sound of the maglev train. The dipole sources of the train are mainly distributed around the radio terminals of the head and tail cars of the maglev train, the bottom of the arms of the streamlined parts of the head and tail cars and the nose tip area of the streamlined part of the tail car, and the quadrupole sources are mainly distributed in the wake area. When the train runs at three speed levels of 400, 500 and 600 km·h⁻¹, respectively, the radiated energy of quadrupole source is 62.4%, 63.3% and 71.7%, respectively, which exceeds that of dipole sources.

This study can help understand the aerodynamic noise characteristics generated by the high-speed maglev train and provide a reference for the optimization design of its aerodynamic shape.

The purpose is using generative adversarial network (GAN) to solve the problem of sample augmentation in the case of imbalanced bearing fault data sets and improving residual network is used to improve the diagnostic accuracy of the bearing fault intelligent diagnosis model in the environment of high signal noise.

A bearing vibration data generation model based on conditional GAN (CGAN) framework is proposed. The method generates data based on the adversarial mechanism of GANs and uses a small number of real samples to generate data, thereby effectively expanding imbalanced data sets. Combined with the data augmentation method based on CGAN, a fault diagnosis model of rolling bearing under the condition of data imbalance based on CGAN and improved residual network with attention mechanism is proposed.

The method proposed in this paper is verified by the western reserve data set and the truck bearing test bench data set, proving that the CGAN-based data generation method can form a high-quality augmented data set, while the CGAN-based and improved residual with attention mechanism. The diagnostic model of the network has better diagnostic accuracy under low signal-to-noise ratio samples.

A bearing vibration data generation model based on CGAN framework is proposed. The method generates data based on the adversarial mechanism of GAN and uses a small number of real samples to generate data, thereby effectively expanding imbalanced data sets. Combined with the data augmentation method based on CGAN, a fault diagnosis model of rolling bearing under the condition of data imbalance based on CGAN and improved residual network with attention mechanism is proposed.

This study focuses on the classification of targets with varying shapes using radar cross section (RCS), which is influenced by the target’s shape. This study aims to develop a robust classification method by considering an incident angle with minor random fluctuations and using a physical optics simulation to generate data sets.

The approach involves several supervised machine learning and classification methods, including traditional algorithms and a deep neural network classifier. It uses histogram-based definitions of the RCS for feature extraction, with an emphasis on resilience against noise in the RCS data. Data enrichment techniques are incorporated, including the use of noise-impacted histogram data sets.

The classification algorithms are extensively evaluated, highlighting their efficacy in feature extraction from RCS histograms. Among the studied algorithms, the K-nearest neighbour is found to be the most accurate of the traditional methods, but it is surpassed in accuracy by a deep learning network classifier. The results demonstrate the robustness of the feature extraction from the RCS histograms, motivated by mm-wave radar applications.

This study presents a novel approach to target classification that extends beyond traditional methods by integrating deep neural networks and focusing on histogram-based methodologies. It also incorporates data enrichment techniques to enhance the analysis, providing a comprehensive perspective for target detection using RCS.

The vibration of the rails is a significant source of railway rolling noise, often forming the dominant component of noise in the important frequency region between 400 and 2000 Hz. The purpose of the paper is to investigate the influence of the ground profile and the presence of the train body on the sound radiation from the rail.

Two-dimensional boundary element calculations are used, in which the rail vibration is the source. The ground profile and various different shapes of train body are introduced in the model, and results are observed in terms of sound power and sound pressure. Comparisons are also made with vibro-acoustic measurements performed with and without a train present.

The sound radiated by the rail in the absence of the train body is strongly attenuated by shielding due to the ballast shoulder. When the train body is present, the sound from the vertical rail motion is reflected back down toward the track where it is partly absorbed by the ballast. Nevertheless, the sound pressure at the trackside is increased by typically 0–5 dB. For the lateral vibration of the rail, the effects are much smaller. Once the sound power is known, the sound pressure with the train present can be approximated reasonably well with simple line source directivities.

Numerical models used to predict the sound radiation from railway rails have generally neglected the influence of the ground profile and reflections from the underside of the train body on the sound power and directivity of the rail. These effects are studied in a systematic way including comparisons with measurements.

Achieving an appropriate indoor environment quality (IEQ) is crucial to a green office environment. Whilst much research has been carried out across the globe on the ideal IEQ for green offices, little is known about which indoor environment New Zealand office workers prefer and regard as most appropriate. This study investigated New Zealand office workers' preference for a green environment.

Workers were conveniently selected for a questionnaire survey study from two major cities in the country – Wellington and Auckland. The perception of 149 workers was analysed and discussed based on the workers' demographics. The responses to each question were analysed based on the mean, standard deviation, frequency of responses and difference in opinion.

The results showed that workers' preferences for an ideal IEQ in green work environments depend largely on demographics. New Zealand office workers prefer work environments to have more fresh air and rely on mixed-mode ventilation and lighting systems. Also New Zealand office workers like to have better acoustic quality with less distraction and background noise. Regarding temperature, workers prefer workspaces to be neither cooler nor warmer. Unique to New Zealand workers, the workers prefer to have some (not complete) individual control over the IEQ in offices.

This study was conducted in the summer season, which could have impacted the responses received. Also the sample size was limited to two major cities in the country. Further studies should be conducted in other regions and during different seasons.

This study provides the opportunity for more studies in this area of research and highlights significant findings worthy of critical investigations. The results of this study benefit various stakeholders, such as facilities managers and workplace designers, and support proactive response approaches to achieving building occupants' preferences for an ideal work environment.

This study is the first research in New Zealand to explore worker preferences of IEQ that is not limited to a particular building, expanding the body of knowledge on workers' perception of the ideal work environment in the country.

The purpose of this paper is to analyze and compare the performances of novel roadable personal air vehicle (PAV) concepts that meet established operational requirements with different types of engines.

The vehicle configuration was devised considering the dimensions and operational restrictions of the roads, runways and parking lots in South Korea. A folding wing design was adopted for road operations and parking. The propulsion designs considered herein use gasoline, diesel and hybrid architectures for longer-range missions. The sizing point of the roadable PAV that minimizes the wing area was selected, and the rate of climb, ground roll distance, cruise speed and service ceiling requirements were met. For various engine types and mission profiles, the performances of differently sized PAVs were compared with respect to the MTOW, wing area, wing span, thrust-to-weight ratio, wing loading, power-to-weight ratio, brake horsepower and fuel efficiency.

Unlike automobiles, the weight penalty of the hybrid system because of the additional electrical components reduced the fuel efficiency considerably. When the four engine types were compared, matching the total engine system weight, the internal combustion (IC) engine PAVs had better fuel efficiency rates than the hybrid powered PAVs. Finally, a gasoline-powered PAV configuration was selected as the final design because it had the lowest MTOW, despite its slightly worse fuel efficiency compared to that of the diesel-powered engine.

Although an electric aircraft powered only by batteries most capitalizes on the operating cost, noise and emissions benefits of electric propulsion, it also is most hampered by range limitations. Air traffic integration or any safety, and noise issues were not accounted in this study.

Aircraft sizing is a critical aspect of a system-level study because it is a prerequisite for most design and analysis activities, including those related to the internal layout as well as cost and system effectiveness analyses. The results of this study can be implemented to design a PAV.

This study can contribute to the establishment of innovative PAV concepts that can alleviate today’s transportation problems.

This study compared the sizing results of PAVs with hybrid engines with those having IC engines.

The purpose of this paper is to estimate the years the European Muslim population will be majority among 30 European countries.

The methodology/approach is to forecast the population of 30 European countries with wavelet analysis combined with the Burg model which fits a pth order autoregressive model to the input signal by minimizing (least squares) the forward and backward prediction errors while constraining the autoregressive parameters to satisfy the Levinson–Durbin recursion, then relies on an infinite impulse response prediction error filter. Three scenarios are considered: the zero-migration scenario where the authors assume that the Muslim population has a higher fertility (one child more per woman, on average) than other Europeans, mirroring a global pattern; a 2017 migration scenario: to the Muslim population obtained in the zero-migration scenario, the authors add a continuous flow of migrants every year based on year 2017; the mid-point migration scenario is obtained by averaging the data of the two previous scenarios.

Among three scenarios, the most likely mid-point migration scenario identifies 13 countries where the Muslim population will be majority between years 2085 and 2215: Cyprus (in year 2085), Sweden (2125), France (2135), Greece (2135), Belgium (2140), Bulgaria (2140), Italy (2175), Luxembourg (2175), the UK (2180), Slovenia (2190), Switzerland (2195), Ireland (2200) and Lithuania (2215). The 17 remaining countries will never reach majority in the next 200 years.

The growing Muslim population will change the face of Europe socially, politically and economically. This paper will provide a better insight and understanding of Muslim population dynamics to European governments, policymakers, as well as social and economic planners.