Search results

Our study centered on activity-based workspaces (ABWs), unassigned open-plan configurations where users’ activities determine the workplace. These workspaces are conceived and shaped by accommodation professionals (APs) like managers and architects and are loaded with their ideas, ideals, norms and values; therefore, they are normative and hegemonic. Previous research has largely failed to consider how APs’ spatial conceptions materialize in the workplace. To address this omission, we adopted a narrative approach to study APs’ impact during the conceptualization stage.

The data were collected via a 10-year at-home ethnographic study at a Dutch university, including observations, interviews, documents and reports. Studying the researchers’ organization allowed for a longitudinal research approach and participative observations. The data focused on the narrative techniques of APs when establishing an ABW.

In introducing ABWs, APs resorted to two principal narrative strategies. Firstly, the ABW concept was lauded as a solution to a host of existing problems. Yet, in the face of shortcomings, lecturers were often blamed.

Despite the considerable influence of APs on both the physical layout of workspaces and the nature of academic labor, there is little insight into their conceptions of the academic workspace. Our research contributes a novel perspective by revealing how APs’ workspace conceptions drive the narratives that underpin the roll-out of ABWs and how they construct narratives of success and failure.

The objective of the study was to explore which COVID-19 teaching and learning methods, that enhanced accounting students' learning experience, should be applied at a residential university after the pandemic.

A qualitative exploratory approach within an interpretive paradigm was applied. A total of 15 semi-structured interviews were conducted with accounting students and the data were analysed using thematic analysis.

This study shows how pre-COVID-19 accounting education can be adapted by learning from the teaching and learning experiences gained during the pandemic and that there are various teaching and learning methods that can be applied in the post-COVID-19 period to enhance students' learning experience. These blended active teaching and learning methods include: the flipped classroom, discussion forum, electronic platform (to ask questions during class), key-concept videos and summary videos. Introducing these teaching and learning methods comes with challenges and the study provides recommendations on how to overcome foreseen obstacles. The contribution of the research is that it informs accounting lecturers' decision-making regarding which teaching and learning methods to apply in the aftermath of COVID-19 to enhance students' learning experience.

It is uncertain which teaching and learning methods employed during the COVID-19 pandemic should be applied at a residential university to enhance the teaching and learning experience after the pandemic. Accounting lecturers might return to their pre-COVID-19 modus operandi, and the valuable experience gained during the pandemic will have served no purpose.

Despite growing emphasis on green skills, innovation, and sustainable livelihoods, research remains limited in the informal economy, particularly in developing countries. This study investigates gaps in green skills training, innovations and livelihoods among informal metal fabricators, shedding light on the challenges and opportunities within this sector. Specifically, the study critically assesses the potential for upskilling informal metal fabricators through Technical and Vocational Education and Training (TVET) institutions and university innovation hubs.

Employing a qualitative interpretive methodology, we conducted 40 key informant interviews with small-scale informal metal fabricators operating in Magaba and Gaza home industries, two of Harare’s largest home industries in Zimbabwe. Subsequent key informant interviews were held with TVET educators and innovation hub lecturers. Observations were carried out over a period of three months to comprehensively explore the issues under investigation.

Gender disparities persist within informal innovation spaces, with women making strides in the traditionally male-dominated field of metal fabrication. However, challenges such as prejudices, stigma, ridicule and abuse hinder women’s full participation in manufacturing processes, often relegating them to less physically demanding roles like customer engagement and product marketing. Inequities in support for green skills training were evident, with the innovation hub model primarily catering to formally educated youth in universities, neglecting the active involvement of notable informal innovators with limited formal education. While a gradual shift toward renewable energy sources is observable in the informal economy, government-owned TVET institutions show minimal or no adjustments in course content to incorporate essential green skills. In light of the findings, the study proposes measures to ensure equitable green skills training, innovation and the promotion of sustainable livelihoods in the informal metal fabrication sector.

The findings of this study represent a novel contribution the gaps in green skills training in the informal economy and how these inform reforms for vocational learning and training practices and the incubation of innovations.

This study aims to investigate how Living Labs of Van Hall Larenstein UAS perform as sustainability-oriented, transdisciplinary learning environments. It shows how the sustainable development goals (SDGs) can be used as a compass and debates the sustainability impact of applied research.

A case study approach was adopted, including a literature review, scoping visits, online workshops and peer-to-peer inter-vision/learning, using the SDGs as a compass and framework for analysis.

Most Living Labs use a “silo-approach” on the SDGs and are designed from a technological-expert perspective. This results in blind spots, particularly on SDGs related to reducing socio-economic inequality and just institutions. Debating unsustainable systems, cultures and practices is avoided. To contribute to sustainability transitions, universities need to invest in developing transformative capacity. This refers to SDG-transition competences such as collaborative communication, constructively engaging with diversity and conflicts, discussing values, norms and ethics and encouraging reflexivity.

Mainly lecturer-researchers were involved in the study. COVID-19 travel restrictions hindered the research at the grassroots level in India and Indonesia.

The study revealed the importance of creating Living Labs as safe and brave inter- and transdisciplinary learning environments to practice reflexivity: encouraging students, researchers and stakeholders to look at sustainability issues from plural perspectives and questioning unsustainable practices, which combined lead to changing perceptions, practices and relations and a deeper understanding of how change happens. The SDGs as a compass method supports reflexivity among stakeholders and in redirecting strategies towards a sustainable future.

Creating suitable learning conditions in university classrooms continues to be a topical issue in higher education. The above means that a continued search for innovative teaching and learning strategies in universities remains a priority issue. The study therefore investigated conditions that facilitate the effective implementation of cooperative learning (CL) as well as how CL influences the academic performance of students in universities in Zimbabwe.

The research adopted a quantitative research approach located in the descriptive research design. A sample of 341 undergraduate students selected using a simple random sampling strategy from a sample frame of 701 undergraduate students participated in the study. The study first used a pre-test and later, a post-test to determine the initial and end of semester (EOS) academic performance levels of students, respectively, on a Calculus 1 course. A self-constructed structured questionnaire was also used for data collection on the views of students towards the use of CL with particular reference to the 5 dimensions of positive interdependence (PDI), promotive interaction (PI), individual and group accountability (IGA), social and interpersonal skills (SS) and group processing (GP). The questionnaire was validated using confirmatory factor analysis. Structural equation modelling was used to test proposed relationships. A total of 341 questionnaires were administered through an email survey. Of the total, 149 completed questionnaires were received from the students, giving a return rate of 43.7%.

The results showed that positive interdependence, promotive interaction, social and interpersonal skills, individual and group accountability as well as group processing were important antecedents to the effective implementation of CL in universities. The results further showed that CL plays a significant role in improving the academic performance of university students; hence, academic performance was viewed as a significant consequence of CL.

This is the first study on the application of CL to enhance the academic performance of university students in the context of Zimbabwe. As a result, caution should be exercised when generalising the results as more studies to either confirm or disconfirm these results in the context of Zimbabwe may still be required.

These results have implications on policy and practice with regards to active teaching strategies in universities. With regards to practice, the results demonstrated that the use of group activities that allow students to share knowledge and support each other while the teacher plays a facilitating role is important for enhancing students' academic performance. With regards to policy, the results showed that universities can enhance the academic performance of students if policies that promote student-centered teaching and learning approaches to ensure that teaching in universities is more student-led than lecturer-led are developed.

While many studies have been conducted in other contexts, to establish the influence of CL on the academic performance of university students, there is no known study on the influence of CL that has been conducted in the context of Zimbabwean universities. The results of this study therefore are an eye opener on the role of CL in enhancing the academic performance of students in Zimbabwean universities.

Higher education institutions and their lecturers are strategic agents and main drivers that contribute to circular economy transition. This requires them to understand the key circular economy competencies and how to integrate circular economy holistically into their curricula with the suitable teaching and learning approaches. This study aims to support them by providing an overview on the characteristics of education for the circular economy (ECE) and suggestions to lecturers to further develop their curricula.

The data consisted of scientific articles (n = 22) describing circular economy courses in higher education. Qualitative content analysis with quantitative features was performed on the selected articles to answer the research question.

The findings confirm that the system’s focus is the key issue in ECE. However, to integrate circular economy holistically into the curricula, ECE should be implemented more widely in the context of different industries and market contexts to find innovative teaching and learning approaches. The demand side needs to be incorporated in the courses, as systemic transformation is also about transforming consumption. All levels of implementation and circular economy objectives should be included in courses to promote systems thinking. In addition, innovative forms of real workplace interaction should be increased.

As ECE has started to emerge as a new field of study, this article provides the first integrated overview of the topic.

This study describes how two organisations transitioned to teaching Lean online during and post Covid-19. This study aims to establish how Lean teaching and training can be designed and delivered effectively online without adverse effects on the student’s learning experience of Lean concepts.

A case study approach was used to review the design, application and results of the transition to online Lean teaching and training. Qualitative and quantitative methods were deployed to assess the results.

Online Lean learning and application were assured via the design of practical problem-based teaching environments, aided by using the virtual classroom as an obeya room and as a kaizen environment where students worked in teams. Students were enabled to learn and apply Lean tools practically and reflect on their learnings.

This study demonstrates that effective online design can ensure. Lean methods are understood without affecting the student's learning, classroom experience and grasp of concepts.

To the best of the author’s knowledge, this is one of the first studies on implementing Lean training and education online during COVID-19 under the lens of both a training provider and university education viewpoint. The changes validated best practices for virtual Lean education and training in the organisations under study, maintained post-COVID.

The South African wool industry is integral to the country's agricultural sector, particularly sheep farming and wool production. Small-scale farmers play a vital role in this industry and contribute to employment and food security in rural communities. However, these farmers face numerous challenges, including a lack of funding, poor farming practices and difficulty selling their wool at fair prices. This study aims to address these challenges, the University of Free State launched a wool value chain project for small-scale farmers.

In this project, one of the studies conducted assessed the effectiveness of different detergents suitable for traditional wool scouring methods for small-scale farmers who lack access to sophisticated machinery. The investigation was conducted by scouring 160 wool samples using three different detergents and filtered water as a control. The wool samples were then evaluated for their cleanliness, brightness and fibre properties through a combination of scanning electron microscopy, spectrophotometry and statistical analysis at different scouring times (3, 10, 15 and 20 min, respectively).

The results showed that the combination of scouring time and the type of scouring solution used could significantly impact wool quality. It was found that using a combination of standard detergent or Woolwash as a scouring solution with a scouring time of 10–15 min resulted in the best outcome in terms of fibre property, wool colour and scouring loss.

This study demonstrated that traditional wool scouring methods could be an option for small-scale farmers and anyone who want to learn how to scour wool without expensive machinery to make wool products.

This study aims to assess higher education students’ interest in learning sustainability competencies and their pro-ecological worldviews at a large research-intensive university in Finland to provide a background information for developing a sustainability science course.

In total, 797 students participated in the study. The data were collected through an online survey that measured students’ interest in learning sustainability competencies and their pro-ecological worldviews. Participants were classified into five categories based on field of study. The data were analysed by using Pearson’s correlation, independent samples t-tests, and analysis of variance.

The participating students perceived learning of critical thinking and values thinking most interesting. Interest in learning sustainability competencies and pro-ecological worldview appeared to differ across fields of study. Participants studying humanities expressed lower interest in collaborative use of digital technology compared to the participating students in science and agriculture. Participating students in health and welfare scored lower on interest in learning values thinking than students in other study fields.

The response rate was low. It is likely that the participants felt strongly about sustainability challenges, therefore making them more interested in sustainability competencies. The limited number of sustainability competencies studied does not allow generalisation to all sustainability competencies.

The differences in interest in learning sustainability competencies and pro-ecological worldview should be understood and considered when planning sustainability education.

These results provide new insights into the interlinkage of students’ interest in learning sustainability competencies, their pro-ecological worldviews and their field of study.

This paper aims to develop indicators of happiness in learning of the Thai open university (TOU)'s undergraduate students.

Sampling for the study was comprised of two groups. Group I comprised eight lecturers who are experts in their disciplines and six students who were purposively sampled. The focus group was used to validate the appropriateness of the indicators. In Group II, 332 students were engaged in a multistage sampling process. The responses were analyzed using descriptive statistics, coefficient correlation, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA).

The indicators of happiness in learning of undergraduate students of TOU were classified in six categories. These included satisfaction with learning environment (five indicators), learning anxiety (five indicators), satisfaction with learning (five indicators), enthusiasm to learn (six indicators), self-satisfaction (six indicators) and readiness to learn (seven indicators). The six categories explained happiness in learning of undergraduate students of TOU at the 65% and fit empirical data.

The TOU can use the indicators for the assessment of happiness in learning of its students as well as guidelines for the improvement of its student learning environments.

There have been very few studies on indicators of happiness in learning of TOU students. Most were done at the basic education level. This study disclosed the six factors affecting happiness in learning of TOU students; therefore, it should inspire and draw attention of many in the field of higher education distance learning.