Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

This paper aims to examine and compare the export performance and competitiveness of Indian and Chinese textile and clothing industry in post-multifibre arrangement (MFA) era.

Balassa’s revealed comparative advantage Index is used to assess the competitiveness of Indian and Chinese textile and clothing exports.

The results indicate that China’s textiles and garments sector holds a greater proportion of the global market compared with India. India has a robust comparative advantage in silk, carpets and cotton post-MFA. Vegetable textile fibers, paper yarn and woven fabrics of paper yarn are also competitive. China had a strong comparative advantage in silk and fabrics; special woven fabrics, tafted textile fabrics, lace, tapestries, trimmings and embroidery in 2005. China also recorded comparative advantage in silk, man-made filaments: strip and the like of man-made textile materials, fabrics; special woven fabrics, tafted textile fabrics, lace, tapestries, trimmings and embroidery and fabrics; knitted or crocheted in 2021.

This study’s results and recommendations could assist the Indian and Chinese Governments develop policies to upgrade their garment industries.

Though vast literature reviews are available for textile and apparel export performance in India and China separately, there are few studies on comparisons. This study is a significant attempt to evaluate India and China’s competitiveness in the global market.

The purpose of this article is twofold. First, this study characterises the current state of the bio-packaging market's development. Second, it identifies key factors influencing and possible scenarios of the bio-packaging market transition to increase the market share of compostable packaging.

The results of 29 in-depth interviews (IDIs) with representatives of the key groups of bio-packaging supply chains' (SCs') stakeholders were the input for the consideration of the research problem.

The main economic, legal, social and technological enablers and barriers to the bio-packaging regime transition are recognised, and their impact at the market level is explained. The authors recognised the hybrid transition scenario towards an increase in the market share of compostable packaging related to the three traditional pathways of transformation, reconfiguration and technological substitution.

This study contributes to a better understanding of the socio-technical system theory by examining interdependencies between landscape (external environment), market regime (bio-packaging market) and niche innovations (compostable packaging) as well as system transition pathways. The findings and conclusions on bio-packaging market developments can be important lessons learnt to be applied in different countries due to the same current development stage of the compostable packaging lifecycle worldwide.

Cesspits are the means for each house to dispose of wastewater in the Bani Kinanah District (BKD) of Jordan, which creates severe environmental complications. This research aimed to find a suitable site for a wastewater treatment plant (WWTP) in BKD.

Geographic Information System (GIS)-based multicriteria decision analysis (MCDA) was used for an optimal site selection for a sewage treatment plant. Several datasets were obtained to prepare the maps of the criteria influencing the choice of the most suitable site for the WWTP. The analytic hierarchy process was used to apply the weights for each factor.

Five classes of suitability were generated: 0.23% very high suitability, 8.49% high suitability, 47.12% moderate suitability, 37.67% low suitability and 6.49% very low suitability. According to Analytical Hierarchy Process (AHP) results, the elevations, slope and groundwater depth have high importance; where their weights 21%, 19% and 17%, respectively. The most suitable site for establishing a WWTP was found in the northern part of the study area, where it is characterized by relatively low elevations (−90 to −93 m), low slope (0–2.5 %), distance from groundwater level (47–82 m) and the space is sufficient for building the plant (25328 m², 8861 m² and 8586 m²).

This research is limited by the availability of data.

The research is invaluable for decision makers involved in urban planning.

Wastewater treatment plants are essential for communities with limited resources such as Jordan. It has also profound impacts on the surrounding environment.

From the present study, it can be concluded that GIS is essential in urban utility establishment, like urban domestic wastewater treatment site selection. Although the study area has adequate potential areas for establishing WWTP, further assessment of flood vulnerability, wastewater amount quantification, population growth and urban expansion must be seriously considered before implementation.

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.