Search results
1 – 2 of 2Gabriel Antonio Mendible, Jack A. Rulander and Stephen P. Johnston
This study aims to evaluate the performance of injection molding inserts produced via rapid and conventional manufacturing techniques considering the mechanical and thermal…
Abstract
Purpose
This study aims to evaluate the performance of injection molding inserts produced via rapid and conventional manufacturing techniques considering the mechanical and thermal performance of the tools as well as the resulting molded part quality.
Design/methodology/approach
Three insert materials and manufacturing techniques were evaluated, jetted photopolymer (PolyJet) 3D printing using digital ABS, direct metal laser sintering (DMLS) using bronze and machining using stainless steel. Molding trials were performed, and the insert surface temperature, longevity and part properties were evaluated. Complementary information was acquired using computer simulation.
Findings
Similar behavior and part quality were observed in machined and DMLS inserts. The latter were used for 500 cycles without any signs of failure. PolyJet inserts had increased cycle time and slower rate of cooling which increased shrinkage and crystallinity in the molded parts. PolyJet inserts could be produced quickly at a lower cost than machined or DMLS inserts.
Research limitations/implications
Cooling within the insert was not studied; inserts were cooled indirectly by the mold plates behind them. Subsequent studies will incorporate cooling lines directly into the inserts.
Originality/value
Little research has been done to understand the thermal behavior of inserts manufactured via rapid tooling techniques. This study provides a direct comparison between rapid tooling techniques, which is supported by simulation results and analysis of the actual molding properties.
Details
Keywords
Steffen Schrock, Stefan Junk and Albert Albers
This study aims to investigate a systematic approach to the production and use of additively manufactured injection mould inserts in product development (PD) processes. For this…
Abstract
Purpose
This study aims to investigate a systematic approach to the production and use of additively manufactured injection mould inserts in product development (PD) processes. For this purpose, an evaluation of the additive tooling design method (ATDM) is performed.
Design/methodology/approach
The evaluation of the ATDM is conducted within student workshops, where students develop products and validate them using AT-prototypes. The evaluation process includes the analysis of work results as well as the use of questionnaires and participant observation.
Findings
This study shows that the ATDM can be successfully used to assist in producing and using AT mould inserts to produce valid AT prototypes. As a reference for the implementation of AT in industrial PD, extracts from the work of the student project groups and suitable process parameters for prototype production are presented.
Originality/value
This paper presents the application and evaluation of a method to support AT in PD that has not yet been scientifically evaluated.
Details