Search results

Legged walking robots have numerous advantages over the wheel or tracked robots due to their strong operational ability and exposure to the complex environment. This paper aims to present details about the mechanical formation and a new conceptual elliptical trajectory generation discussed throughout the paper of the quadruped robot.

Initially, a realistic CAD model of the four-legged robot is developed in Solidwork-2019. The proposed model’s forward and inverse kinematics equations are deduced using Denavit–Hartenberg parameters. Based on geometry and kinematics, manipulability and obstacle avoidance are investigated. A method of galloping trajectory is proposed for aiming the increase of upright direction impulse, which is produced by ground reaction force at each step frequency. Furthermore, the locomotion equation of the ellipse trajectory is derived by setting transition angle polynomial of free-fall phase, stance phase and swing phase and the constraints.

Finally, a successive simulation on a 2D sagittal plane is performed to check and verify the usefulness of the proposed trajectory. Before the development of the full quadruped, a single prototype leg is generated for experimental verification of the dynamic simulations.

The proposed trajectory is novel in that it uses force tracking control, which is intended to improve the quadruped robot’s robustness and stability.

This study aims to improve the stability and obstacle surmounting ability of the traditional wall-climbing robot on the surface of the ship, a wheel-track composite magnetic adsorption wall-climbing robot is proposed in this paper.

The robot adopts a front and rear obstacle-crossing mechanism to achieve a smooth crossover. The robot is composed of two passive obstacle-crossing mechanisms and a frame, which is composed of two obstacle-crossing magnetic wheels and a set of tracks. The obstacle-crossing is realized by the telescopic expansion of the obstacle-crossing mechanism. Three static failure models are established to determine the minimum adsorption force for the robot to achieve stable motion. The Halbach array is used to construct the track magnetic circuit, and the influence of gap, contact area and magnet thickness on the adsorption force is analyzed by parameter simulation.

The prototype was designed and manufactured by the authors for static failure and obstacle crossing tests. The prototype test results show that the robot can cross the obstacle of 10 mm height under the condition of 20 kg load.

A new structure of wall-climbing robot is proposed and verified. According to the test results, the wall-climbing robot can stably climb over the obstacle of 10 mm height under the condition of 20 kg load, which provides a new idea for future robot design.

There are various uncertain and nonlinear problems in hydraulic legged robot systems, including parameter uncertainty, unmodeled dynamics and external disturbances. This study aims to eliminate uncertainties and improve the foot trajectory tracking control performance of hydraulic legged robots, a high-performance foot trajectory tracking control method based on fixed-time disturbance observers for hydraulic legged robots is proposed.

First, the robot leg mechanical system model and hydraulic system model of the hydraulic legged robot are established. Subsequently, two fixed-time disturbance observers are designed to address the unmatched lumped uncertainty and match lumped uncertainty in the system. Finally, the lumped uncertainties are compensated in the controller design, and the designed motion controller also achieves fixed-time stability.

Through simulation and experiments, it can be found that the proposed tracking control method based on fixed-time observers has better tracking control performance. The effectiveness and superiority of the proposed method have been verified.

Both the disturbance observers and the controller achieve fixed-time stability, effectively improving the performance of foot trajectory tracking control for hydraulic legged robots.

This paper aims to investigate an autonomous obstacle-surmounting method based on a hybrid gait for the problem of crossing low-height obstacles autonomously by a six wheel-legged robot. The autonomy of obstacle-surmounting is reflected in obstacle recognition based on multi-frame point cloud fusion.

In this paper, first, for the problem that the lidar on the robot cannot scan the point cloud of low-height obstacles, the lidar is driven to rotate by a 2D turntable to obtain the point cloud of low-height obstacles under the robot. Tightly-coupled Lidar Inertial Odometry via Smoothing and Mapping algorithm, fast ground segmentation algorithm and Euclidean clustering algorithm are used to recognize the point cloud of low-height obstacles and obtain low-height obstacle in-formation. Then, combined with the structural characteristics of the robot, the obstacle-surmounting action planning is carried out for two types of obstacle scenes. A segmented approach is used for action planning. Gait units are designed to describe each segment of the action. A gait matrix is used to describe the overall action. The paper also analyzes the stability and surmounting capability of the robot’s key pose and determines the robot’s surmounting capability and the value scheme of the surmounting control variables.

The experimental verification is carried out on the robot laboratory platform (BIT-6NAZA). The obstacle recognition method can accurately detect low-height obstacles. The robot can maintain a smooth posture to cross low-height obstacles, which verifies the feasibility of the adaptive obstacle-surmounting method.

The study can provide the theory and engineering foundation for the environmental perception of the unmanned platform. It provides environmental information to support follow-up work, for example, on the planning of obstacles and obstacles.

This study aims to address the issue of random movement and non coordination between docking mechanisms and locking mechanisms, and proposes a comprehensive dynamic docking control architecture that integrates perception, planning, and motion control.

Firstly, the proposed dynamic docking control architecture uses laser sensors and a charge-coupled device camera to perceive the pose of the target. The sensor data are mapped to a high-dimensional potential field space and fused to reduce interference caused by detection noise. Next, a new potential function based on multi-dimensional space is developed for docking path planning, which enables the docking mechanism based on Stewart platform to rapidly converge to the target axis of the locking mechanism, which improves the adaptability and terminal docking accuracy of the docking state. Finally, to achieve precise tracking and flexible docking in the final stage, the system combines a self-impedance controller and an impedance control algorithm based on the planned trajectory.

Extensive simulations and experiments have been conducted to validate the effectiveness of the dynamic docking system and its control architecture. The results indicate that even if the target moves randomly, the system can successfully achieve accurate, stable and flexible dynamic docking.

This research can provide technical guidance and reference for docking task of unmanned vehicles under the ground conditions. It can also provide ideas for space docking missions, such as space simulator docking.