Search results

This study aims to investigate the noise-inducing characteristics during the start-up process of a mixed-flow pump and the impact of different start-up schemes on pump noise.

This study conducted numerical simulations on the mixed-flow pump under different start-up schemes and investigated the flow characteristics and noise distribution under these schemes.

The results reveal that the dipole noise is mainly caused by pressure fluctuations, while the quadrupole noise is mainly generated by the generation, development and breakdown of vortices. Additionally, the noise evolution characteristics during the start-up process of the mixed-flow pump can be divided into the initial stage, stable growth stage, impulse stage and stable operation stage.

The findings of this study can provide a theoretical basis for the selection of start-up schemes for mixed-flow pumps, reducing flow noise and improving the operational stability of mixed-flow pumps.

The purpose of this study is to examine the level of Shariah governance disclosure among Islamic banks in Malaysia and the Gulf Cooperation Council (GCC) countries (i.e. Kuwait, Bahrain, United Arab Emirates, Qatar, Oman and Saudi Arabia). On top of that, the effect of Shariah governance disclosure on Islamic banks financial performance is investigated.

Data underwent quantitative content analysis and a mean comparison of the Shariah governance disclosure mechanisms as well as multiple regression analysis. Shariah governance information is obtained from the Islamic banks' official websites and the Bursa Malaysia Exchange.

The results of the content analysis revealed that the level of Shariah governance disclosure among Malaysian Islamic banks has been more pronounced than in the GCC countries. Additionally, the multiple regression analysis results specified that of the five Shariah governance disclosure mechanisms, the Shariah committee emerged as the strongest determinant in the financial performance of the Islamic banks, followed by transparency and disclosure.

Islamic banks should emphasise publishing Shariah governance information in annual reports to reflect superior accounting practices as assessed by certified Shariah auditors with an effective monitoring system.

The empirical findings are vital for serving as a guideline for Islamic banks in Malaysia and the GCC countries to disclose their practice of Shariah governance and gain empirical insights into its effect on firms’ financial performance. Following that, Islamic banks would improve their accounting practices while adhering to Shariah principles, strengthen internal controls and boost their brand reputation.

This study aims to examine the influence of ownership structure and board composition on the probability and intensity of stock repurchases. The study’s sample comprises 3,744 firm-year observations, consisting of 53 repurchasing firms with 96 firm-year observations from 2008 to 2019.

Probit and fixed-effects regression models are used to obtain empirical results. Moreover, a probit model with a continuous endogenous regressor (IV-probit) and an instrumental variable method with two-stage least squares (IV-2SLS) estimation are used to address endogeneity.

Corporations with high family or state ownership tend to inhibit stock repurchases to hoard excess free cash flow, supporting agency theory. Conversely, firms with high board independence tend to repurchase their stocks at least once to distribute free cash flows to shareholders, confirming agency theory. Nonetheless, corporations with more female directors on the board or CEO duality tend to conduct stock repurchases at least once but do not repurchase stocks with high values. Interestingly, more female directors on the board may send false signals about undervalued stocks.

This is the first study to reveal that firms with CEO duality repurchase their stocks at least once but avoid repurchasing shares with high values. It is also the first study to explore whether women on a board may cause false signaling about undervalued stocks. Furthermore, this study reveals that family and state ownership are potential determinants of stock repurchases in countries with high ownership concentration. This is the first study to address this issue in Thailand.

Inclination angle has been reported to have an enhancing effect on the thermal-hydraulic characteristics and entropy of some thermal systems. Therefore, this paper aims to numerically investigate the effects of inclination angle, volume concentration and Reynolds number on the thermal and hydraulic characteristics and entropy generation rates of water-based Al₂O₃ nanofluids through a smooth circular aluminum pipe in a turbulent flow.

A constant heat flux of 2,000 Watts is applied to the circular surface of the tube. Reynolds number is varied between 4,000 and 20,000 for different volume concentrations of alumina nanoparticles of 0.5%, 1.0% and 2.0% for tube inclination angles of ±90o, ±60o, ±45o, ±30o and 0o, respectively. The simulation is performed in an ANSYS Fluent environment using the realizable kinetic energy–epsilon turbulent model.

Results show that +45o tube orientation possesses the largest thermal deviations of 0.006% for 0.5% and 1.0% vol. concentrations for Reynolds numbers 4,000 and 12,000. −45o gives a maximum pressure deviation of −0.06% for the same condition. The heat transfer coefficient and pressure drop give maximum deviations of −0.35% and −0.39%, respectively, for 2.0% vol. concentration for Reynolds number of 20,000 and angle ±90o. A 95%–99.8% and 95%–98% increase in the heat transfer and total entropy generation rates, respectively, is observed for 2.0% volume concentration as tube orientation changes from the horizontal position upward or downward.

Research investigating the effect of inclination angle on thermal-hydraulic performance and entropy generation rates in-tube turbulent flow of nanofluid is very scarce in the literature.

Maintaining the safety of the human is a major concern in factories where humans co-exist with robots and other physical tools. Typically, the area around the robots is monitored using lasers. However, lasers cannot distinguish between human and non-human objects in the robot’s path. Stopping or slowing down the robot when non-human objects approach is unproductive. This research contribution addresses that inefficiency by showing how computer-vision techniques can be used instead of lasers which improve up-time of the robot.

A computer-vision safety system is presented. Image segmentation, 3D point clouds, face recognition, hand gesture recognition, speed and trajectory tracking and a digital twin are used. Using speed and separation, the robot’s speed is controlled based on the nearest location of humans accurate to their body shape. The computer-vision safety system is compared to a traditional laser measure. The system is evaluated in a controlled test, and in the field.

Computer-vision and lasers are shown to be equivalent by a measure of relationship and measure of agreement. R² is given as 0.999983. The two methods are systematically producing similar results, as the bias is close to zero, at 0.060 mm. Using Bland–Altman analysis, 95% of the differences lie within the limits of maximum acceptable differences.

In this paper an original model for future computer-vision safety systems is described which is equivalent to existing laser systems, identifies and adapts to particular humans and reduces the need to slow and stop systems thereby improving efficiency. The implication is that computer-vision can be used to substitute lasers and permit adaptive robotic control in human–robot collaboration systems.

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

Golestan province in the northern part of Iran has been affected by devastating floods. There has been a significant change in the pattern of rainfall in Golestan province based on an analysis of the seven heaviest rainfall events in recent decades. Climate change appears to be a significant contributing factor to destructive floods. Thus, this paper aims to assess the susceptibility of this area to flash floods in case of heavy downpours.

This paper uses a variety of computational approaches. Following the collection of data, spatial analyses have been conducted and validated. The layers of information are then weighted, and a final risk map is created. Fuzzy analytical hierarchy process, geographic information system and frequency ratio have been used for data analysis. In the final step, a flood risk map is prepared and discussed.

Due to the complex interaction between thermal fluctuations and precipitation, the situation in the area is further complicated by climate change and the variations in its patterns and intensities. According to the study results, coastal areas of the Caspian Sea, the Gorganrood Basin and the southern regions of the province are predicted to experience flash floods in the future. The research criteria are generalizable and can be used for decision-making in areas exposed to flash flood risk.

The unique feature of this paper is that it evaluates flash flood risks and predicts flood-prone areas in the northern part of Iran. Furthermore, some interventions (e.g. remapping land use and urban zoning) are provided based on the socioeconomic characteristics of the region to reduce flood risk. Based on the generated risk map, a practical suggestion would be to install and operate an integrated rapid flood warning system in high-risk zones.

This study aims to clarify the evolution law of stress field and fracture field during the mining process of inclined coal seam, to prevent the occurrence of roof burst water and impact ground pressure accident during the advancing process of working face.

The evolution law of stress-fracture field under different mining conditions of inclined coal seam was studied by using discrete element method and similar material simulation method.

The overburden stress at the lower end of the coal seam was mainly transmitted to the deep rock mass on the left side, and the overburden stress at the upper end was mainly transmitted to the floor direction. With the increase of the inclined length of the mining coal seam, the development of the fracture zone gradually evolves from the “irregular arch” form to the “transversely developed trapezoid” form. The development range of the fracture zone was always in the internal area of the stress concentration shell.

An original element of this paper is based on the condition that the dip angle of coal seam is 35°, and the evolution law of overburden stress-fracture field during the excavation of coal seam with different lengths was analyzed by UDEC numerical simulation software. The coupling relationship between stress shell and fracture field was proposed, and the development range of fracture zone was determined by stress. The value of this paper is to provide technical support and practical basis for the safety production of a mine working face.

The Polish economy has undergone major challenges and changes over the past few decades. The country's trade flows, in particular, have become more firmly tied to the country’s Western neighbors as they have grown in volume. This study examines Poland's trade balances in ten Standard International Trade Classification (SITC) sectors versus the United States of America, first testing for and isolating structural breaks in each time series. These breaks are then included in a set of the cointegration models to examine their macroeconomic determinants.

Linear and nonlinear and nonlinear autoregressive distributed lag models, both with and without dummies corresponding to structural breaks, are estimated.

One key finding is that incorporating these breaks reduces the significance of the real exchange rate in the model, supporting the hypothesis that this variable already incorporates important information. It also results in weaker evidence for cointegration of all variables in certain sectors.

This study looks only at one pair of countries, without any third-country effects.

An important country pair's trade relations is examined; in addition, the real exchange rate is shown to incorporate economic information that results in structural changes in the economy. The paper extends the existing literature by conducting an analysis of Poland's trade balances with the USA, which have not been studied in such a context so far. A strong point is a broad methodology that lets compare the results the authors obtained with different kinds of models, both linear and nonlinear ones, with and without structural breaks.