Search results

This paper aims to evaluate the level of compliance of fire safety with the legal requirements in Malaysia government hospital buildings by evaluating via fire risk management.

Five government hospitals were selected. These five hospitals were selected due to the location of Penang, which is one of the fast-growing states in Malaysia (Salleh, 2019; Ebekozien, 2019). This state is the second most densely populated state after Wilayah Persekutuan Kuala Lumpur, with an average distribution of 1,490 persons per square km. This higher population caused the higher demand on the health-care services by the public (DOSM, 2016). The observation and building audit processes are as described. Hundreds of photos were taken for qualitative analysis, and all fire safety elements were measured for the descriptive analysis for each hospital. The framework of audit elements is created based on the Life Safety Code: NFPA 101 (2018), UBBL 1984: Part VII (Fire Requirements) and Part VIIII (Fire Alarms, Fire Detection, Fire Extinguishment and Fire Fighting Access). The cross-sectional descriptive evaluation is conducted in the case studies building in accordance with Life Safety Code of NFPA, also known as NFPA 101. To conduct the study, the information needed to assess the fire safety status was extracted from the CFSES software based on the NFPA 101 standard and prepared and compiled by the researcher as a checklist. In the next stage, gathered information was analysed using Computerised Fire Safety Evaluation System (CFSES) software. This method was developed based on the NFPA 101 standard and evaluated the fire risk from four dimensions of containment, extinguishment, people movement and general safety. This software gives the risk assessment results in three areas of fire control, exits and general safety. To assess the fire risk of the commercial buildings after entering the background information (height, age, number of stories, etc.) in the software, the software first calculates the score that the building should obtain in the three aspects of fire control, exit routes and general safety (minimum score required).

The utmost zones in the case studies (44.3%) occupied by limited mobility are located at low-rise buildings or at the first floor to third floor of the hospital buildings. Hospitals managements lacked in creating the maximum exit route and egress the occupants to disclosed the building during evacuation, it correlates to the patients' mobility positions strategy to assign their categories that fell on effortless mobilisation. Surveyed hospitals were built with the non-combustible materials, even though four of the case studies were built before 1984. Hospitals were equipped with hazard separations and vertical smoke pores, and in most of the zones, sprinkler system is installed only in the corridors, equipped with communication system and system of communication with fire and relief organisations and has a fire detection and alarm system throughout the building. Results of fire risk assessment on four groups of elements were tested via CFSES revealed from 122 zones of surveyed hospitals; 102 or 84% of zones give the highest failed rate to comply the NFPA 101 requirements in terms of people movement in the building. The high-occupied Penang General Hospital contributed as the highest case study for not complying with the minimum requirements in all dimensions: people movement elements (41 zones), fire containment (31 zones), fire extinguisher (31 zones) and general safety (20). Fire extinguishment (62 zones) recorded the highest numbers of zones that complied with NFPA 101 (2013). The overall results of the fire risk assessment suggested that in terms of the fire control, egress and general safety aspects, the fire risk assessment score was unacceptable (failed) in all hospital buildings studied, and in the three areas mentioned, the general safety, egress/exit routes and fire control were in a worse status in terms of the score obtained in the software. None of the surveyed hospital received the minimum safety score in the three areas mentioned. The involvement of Emergency Response Team is crucial to overcome this egress or fire exit requirement and parameters.

Several limitations exist in this research that cannot be controlled. Firstly, the occupancy rates only determined during peak hour. Accessibility into hospital compound permitted only during daytime. Secondly, the fire safety audits and fire safety risk management in this research are not being conducted by a professional architect or engineer and as a result must be relied on the direct inspection checklist to create valid results. Thirdly, this research has some limitations which need to be noted but does not affect the robustness of the study’s findings. This study focuses only on five selected public hospitals in one state of the northern region of Malaysia and excluded data gathering from all other parts of Malaysia. The perception of hospital operators regarding fire safety issues from different state hospitals may allow comparisons.

The findings of this paper should make a key practical contribution to the body of knowledge. In practice, the proposed framework should expand the knowledge of public hospital fire safety management plan concerning the level of fire safety compliance with the requirements in government hospital buildings and develop a fire safety management plan framework for government hospital buildings.

This paper develops an early framework component related to the occupants’ safety which gives the basis for future research in hospital fire safety settings as it imparts early investigation into the consequence of investigating the phenomenon from the operators’ perspective as an attempt to improve public health-care fire safety performance in hospitals.

This paper has created a few measurement tools that can be applied among public hospital buildings stakeholders to perform the fire safety audit and risk management and rate the performance of Fire Safety Management in public hospitals.

This study aims to investigate the dynamic influences of clustered barriers that hinder electronic procurement technology (EPT) implementation in construction procurement, using the neuro-fuzzy system.

A comprehensive literature review was conducted and 21 barriers to EPT implementation within construction projects were identified. Based on an expert survey, 121 datasets were gathered for this study. Using mean and normalization analysis for the datasets, 15 out of the 21 barriers were deemed to have critical influences in EPT barriers phenomenon. Subsequently, the critical barriers were classified into five groups: human-related; technological risk-related; government-related; industry growth-related; and financial-related. The relationships and influence patterns between the groups of barriers to EPT implementation were analyzed using the neuro-fuzzy system. Furthermore, sensitivity analysis was performed to examine the dynamic influence levels of the barriers within the hindrance level composition.

The results reveal that addressing one barrier group does not reduce the high levels of hindrances experienced in EPT implementation. However, addressing at least two barrier groups mostly tends to reduce the hindrance levels for EPT implementation. Further, this study revealed that addressing some barrier group pairings, such as technological risk-related and government-related barriers, while other barrier groups remained at a high level, still resulted in high levels of hindrances to EPT implementation in construction procurement.

This study provides insights for researchers to help them contribute to the development of theory with contemporary approaches based on the influence patterns of barrier interrelationships.

This study provides a model that would help practitioners and decision makers in construction procurement to understand and effectively determine the complex and dynamic influences of barrier groups to EPT uptake, for the development of suitable mitigation strategies.

This study provides novel insights into the complex influence patterns among grouped barriers concerning EPT adoption in the construction industry. Researchers and practitioners are equipped with knowledge on the influence patterns of barriers. This knowledge aids the development of effective strategies that mitigate the combined groups of barriers, and promote the wider implementation of EPT in the construction industry.

Globally, several studies have shown that hospital building is charged with multiple inherent risks because a large number of users are vulnerable in tragic events. Thus, the need for the fire safety management plan (FSMP) has been proved as an instrument to mitigate fire and related risks in healthcare facilities. In Malaysia, FSMP regarding public healthcare building is yet to be explored in-depth. Therefore, this paper explores the information necessary to develop the FSMP framework for public hospital buildings.

The paper’s objectives were accomplished via a combination of five face-to-face interviews and observations of five selected public hospitals in Pulau Pinang, Malaysia. The five key participants were across the five public hospitals and collated data analysed through thematic analysis with the assistance of MAXQDA 2018.

Findings show that fire safety stakeholders practice system, fire safety action plan and fire risk management were the three main variables that promote fire safety programme and will improve FSMP for Malaysia’s public hospital buildings.

This paper’s data collection is limited to Penang, Malaysia, and a qualitative research approach was used, but this does not deteriorate the strength of the findings. Future studies are needed to consider validating findings from this paper via a quantitative approach.

The suggested framework can be employed by Malaysia’s public hospital authorities as a guideline to mitigate fire hazards in the country’s healthcare facilities.

This paper is encouraging hospital operators and other key stakeholders to improve on their FSMP for healthcare buildings across Malaysia as part of the study implications.

This study aims to explore the associations linking employees’ challenge-hindrance appraisals toward artificial intelligence (AI) to service performance while considering the dual mediating roles of job crafting and job insecurity, as well as the moderating role of AI knowledge.

A survey was administered to a sample of 297 service industry employees. This study examined all the hypotheses with Mplus 8.0.

This study confirms that challenge appraisal toward AI has an indirect positive influence on service performance via job crafting (motivation process), whereas hindrance appraisal toward AI has an indirect negative influence on service performance via job insecurity (strain process). Meanwhile, AI knowledge, serving as a key personal resource, could strengthen the positive impacts of challenge appraisal toward AI on job crafting and of hindrance appraisal toward AI on job insecurity.

Organizational decision-makers should first survey employees’ appraisals toward AI and then adopt targeted managerial strategies. From the perspective of service industry employees, employees should adopt proactive coping strategies and enrich their knowledge of AI to meet the challenges brought by this technology.

The primary contribution of this study is that we enrich the literature on AI by exploring the dual mediators (i.e. job crafting and job insecurity) through which AI awareness affects service performance. Moreover, this study advances our understanding of when appraisals toward AI influence job outcomes by identifying the moderating role of AI knowledge.

The purpose of this study is to provide insights into bootleg innovation by investigating whether perceived hindrance stressors play an important role in bootlegging and how different organizational ownership types (state-owned enterprises (SOEs) vs non-SOEs) affect this relationship.

The study samples comprised 3,967 employees from 674 knowledge-intensive companies in southern China. Multilevel structural equation modeling was used to test the hypotheses.

Drawing on the conservation of resources (COR) theory, the results show that hindrance stressors have a curvilinear (U-shaped) influence on bootleg innovation, and that the curve relationship between the hindrance stressors and bootlegging is more pronounced among employees in non-SOEs.

The findings indicate that either a low or high level of hindrance stressors can activate a high level of bootlegging activities among employees. These results suggest that managers need to be vigilant in detecting the level of hindrance because different motivations predominate at different stressor levels.

Based on the COR theory, the findings cast perceived hindrance stressors as an antecedent of bootlegging at the individual level. The inquiry into state ownership types further provides a comprehensive understanding of the non-linear relationship between hindrance stressors and bootlegging.

Researchers and policymakers have given attention to generic skills development in higher institutions. One of the intentions is to broaden graduate employability with generic skills. In South Africa, there is a paucity of research concerning future built environment practitioners’ (FBEP) generic skills development from the students’ perspective. Thus, this paper aims to investigate South Africa’s FBEP generic skills and suggest feasible solutions to improve FBEP generic skills from the students’ perception.

The researchers collated the views of FBEP via a phenomenology type of qualitative research design. It covered selected South African public universities and investigated the discourses that underpin “perceived hindrance” in developing generic skills for FBEP. Selected 30 FBEP were engaged in the virtual interviews across three public universities. Data saturation was achieved. Three themes emerged and were analysed through a thematic analysis.

Findings show that FBEP generic skills development will enhance integrated productivity and higher value for money in construction project delivery. But developing these skills demands a holistic approach. Findings have raised concern with the perceived hindrances facing FBEP in developing generic skills. Findings suggest the need to revisit and revamp the curricula to develop these skills and strengthen policies that will “nip” possible hindrances.

This study was limited to South Africa’s FBEP generic skills from students’ perception. In line with the limited resources, three public universities were covered from the selected provinces in South Africa. Future research with a more diverse sample is needed to ensure a better representative and generalisation of findings.

Findings show that apart from academic knowledge system thinking skills, civic responsibility skills and critical thinking skills are germane for intending construction industry professionals. Others are integrated teamwork skills, good attitude and communication skills, entrepreneurship skills and resources management skills. Findings from this paper may stir up the education sector’s stakeholders to revamp the curricula in enhancing these skills among students from the basic to higher institutions. The outcome will improve productivity in the construction industry.

Although few scholars have discussed generic skills in the built environment, there are limited studies from the students’ context in developing countries, a South Africa case study, a gap this research aims to fill. Also, it proffers ways to mitigate perceived hindrances facing FBEP in developing generic skills.

First, this paper aims to identify and discuss the paradoxical relationship between theology and technology. Second, it also demonstrates the urgency of the digitalization of the Church ministry. Third, this paper offers an understanding of technology and theology through the missional perspective of the Church. Fourth, this paper asks the following questions: (1) Can the Church innovate ways of using technology while maintaining the social aspect of the organism? (2) Can organizations migrate to digital technology with adequate technology/human interface to engage innovations? (3) How can organizations renew their products via technological platforms? (4) From a socio-technical perspective on the digital era, can the Church keep abreast of its workforce in a way that provides adequate participative opportunities? and finally, this paper further interacts with views on the paradigm shift of practical theology and techno-theological practice and possible inclusion in the theology vocabularies of the Church.

A thorough search on the subject of techno-theology (TTheo) reveals that there are no scholarly works that offer a conceptual understanding of TTheo. However, TTheo derives an interdisciplinary definition from innovative leadership, socio-religious transformation, transformational leadership, anthropological studies, strategic leadership (and authentic leader AL), scenario thinking/planning, technological disruptions, digital transformation and Church sustainability. There are multiple inferences in the literature on the advantages and disadvantages of technology in human relations (Banks et al., 2016; Dyer, 2011).

Innovation is open-ended. It can take place anywhere and anytime. All it requires are human entities who are creative enough to respond appropriately. The author agrees with Goldsmith that innovation is not limited to a single aspect of any system (Goldsmith et al., 2010, p. xxiv). Innovation can occur anywhere, and there is no limit to it. The only hindrance to innovation is the lack of creative leaders, creative agents of change and an enabling environment to foster change (Teece, 2018, 2010; Bounfour, 2016; Hanna, 2016). While technological innovation is a good development, other factors drive innovation. Technological innovation is not an end by itself. It is a means to an end. And it cannot stand in isolation from other factors that support it. It competes with some external factors which can sustain it or obstruct it.

This paper used the traditional (or narrative), meta-analysis and meta-synthesis methods of literature reviews to study scenario thinking, system thinking, planning and TTheo principles to find a suitable space to redefine and reconstruct the Church’s ministry engagement in a technologically avowed age. This paper is not a technology text, nor does it pose to answer technology questions. Instead, it focuses on the role of technology in Christian ministry.

This paper recommended that the Church redefines its digital transformation perspective by adopting a TTheo that embraces digital materials and hybrid technology in its ministry engagement across the board. This paper further interacts with views on the paradigm shift of practical theology and techno-theological practice and possible inclusion in the theology vocabularies of the Church.

Technology shapes human interactions in a sociopolitical, socioreligious and sociocultural environment (Dyer, 2011; Postman, 2021; McLauhan, 1994, p. 7). As a community of faith, the Church is a segment of the broader cultural environment with a cross-section of people from various works of life and opinions. Language, customs and practice differ significantly from others in every environment. Hence, each setting is unique in multiple ways (Teece, 2018, 2010). The world continues to experience developments in many areas. Due to the symbiotic nature of humans and the environment, cross-breeding and cross-fertilization of ideas are inevitable. As one organization reacts to its unique existence, it indirectly or directly affects another. Hence, while growth may be relative, its impacts are overtly universal.

The term “Techno-theology” is a newcomer in the theological circle. Hence, there are practically little or minimal literature on this subject area. In this paper, the author has written the original concept of the subject matter (TTheo). This paper is part of the ground-breaking research the author is conducting on “Techno-theology.” The author’s PhD research proposal was approved in December 2022. The author’s research focuses on the subject matter of this paper (TTheo). The author also looks forward to leading a deeper conversation among scholars.

Studies show that building information modelling (BIM) technology can improve construction productivity regarding the design, construction and maintenance of a project life cycle in the 21st century. Revit has been identified as a frequently used tool for delivering BIM in the built environment. Studies about BIM technology via Revit are scarce in training middle-level workforce higher education institutions. Thus, this study aims to investigate the relevance of BIM technology and offer measures to promote digitalisation in Nigeria’s built environment polytechnic undergraduates via Revit.

Given the unexplored nature of training the middle-level workforce in Nigeria, 37 semi-structured virtual interviews were conducted across Nigeria, and saturation was achieved. The participants were knowledgeable about construction-related BIM. The researchers used a thematic analysis for the collected data and honed them with secondary sources.

Improved visualisation of design, effective and efficient work productivity, automatic design and quantification, improved database management and collaboration and data storage in the centrally coordinated model, among others, emerged as BIM’s benefits. BIM technology via Revit is challenging, especially in Nigeria’s polytechnic education curriculum. The 24 perceived issues were grouped into government/regulatory agencies-related, polytechnic management-related and polytechnic undergraduate students-related hindrances in Nigeria’s built environment.

This study is limited to BIM implications for Nigeria’s built environment polytechnic undergraduates.

This study contributes to the literature paucity in attempting to uncover perceived issues hindering the implementation of BIM technology via Revit in training Nigeria’s built environment polytechnic undergraduates via a qualitative approach.

Studies showed that digital technology applications in the construction industry are low, especially in many developing nations. Construction incentivisation (CI) is one of the long-standing principles adopted to enhance project performance. There is a paucity of studies concerning CI to improve digital technology applications. Thus, this research investigated the relevance and perceived hindrances that may hinder the implementation of CI from promoting digital technologies and proffer ways to improve digital technology applications in the construction sector.

In Nigeria’s context, this research is exploratory. Twenty-four semi-structured virtual interviews were conducted in Lagos and Abuja, Nigeria, with knowledgeable participants that indicated interest and were interviewed. The engaged interviewees were drawn from government agencies, academicians in construction consultancy, Internet and communication technology experts, construction contracting firms and construction consulting firms. The collected data were coded and analysed through a thematic method.

Digitalisation of the industry via CI may face some hindrances. The perceived issues that may hinder CI implementation were classified into most severe, severe and fairly severe in Nigeria’s construction industry context. Findings proffer feasible policy solutions that can mitigate these issues and improve digital technology applications in the industry via the CI.

This study covered the relevance and perceived issues that may hinder the implementation of the CI to improve digital technology applications in the industry. Also, the study proffers policy solutions to enhance digital technology applications in the industry via the CI concept.

Findings from this research will support and offer a valuable understanding of the relevance of the “incentivisation concept” to improve digital technology applications in the Nigerian-built environment. Other developing countries with low applications of digital technology in construction may consider the suggested policy solutions from this research. Also, this study will stir policymakers and construction practitioners to support policies tailored towards improving digital technology applications in construction.

This research contributes by exploring the effectiveness of the CI concept and informing construction practitioners and policymakers on how to improve digital technology applications in the Nigerian construction industry.

Even though sustainable entrepreneurship has increasingly received researchers’ attention in recent years, the topic remains rather under-researched in natural resources’ rich Gulf countries such as Oman. Hence, this paper aims to fill this gap in the literature and, to the best of the authors’ knowledge, is one of the first attempts to assess the state of sustainable entrepreneurship development in Oman from a multi-stakeholder perspective.

This paper uses a qualitative research approach where in-depth semi-structured interviews were undertaken with 12 respondents representing relevant stakeholders of sustainable entrepreneurship development in Oman. The interviewees included four sustainable entrepreneurs, four policymakers and four educationists representing entrepreneurial skills development institutes in Oman.

This papers’ findings highlight that despite some positive improvements, several critical challenges remain, which hinder sustainable entrepreneurship development. The authors further found the role of FinTech to be critical in this concern by all stakeholders, though its usage and acceptance remain low. Also, the costs associated with the post-carbon (sustainable) economy and different profitability evolution have resulted in a slow change in the policy development in this concern. From an educational (skills development) perspective, a lack of context-specific training programmes and culture-based hesitations appeared to be hindering achieving sustainable entrepreneurship possibilities in Oman. The nascent entrepreneurial ecosystem, bureaucracy and lack of human capital (attraction as well as retention) appeared to be significant challenges for entrepreneurs. Finally, the findings highlighted the need for cross-sector collaboration with clear benchmarks for effective policy development concerning sustainable entrepreneurship in Oman.

To the best of the authors’ knowledge, this paper is the first academic study explicitly highlighting the state of sustainable entrepreneurship in Oman by incorporating the development initiatives as well as the major challenges in the analysis. Secondly, this study is also a pioneering work specifying the interlinkage between financing (FinTech), policy initiatives and skills development and the development of a sustainable entrepreneurship ecosystem in an under-researched context of Oman. Finally, the transition to a sustainable economy is challenging in natural resources’ dependent economies like Oman, as it needs to be supported by the mindset change in the larger society (legitimacy). In this concern, this paper, to the best of the authors’ knowledge, is one of the first academic endeavours to also specify the role of legitimacy from the perspective of different stakeholders (and larger society) for sustainable entrepreneurship development in such contexts.