Search results
1 – 3 of 3Mario Rosario Chiarelli, Vincenzo Binante, Stefano Botturi, Andrea Massai, Jan Kunzmann, Angelo Colbertaldo and Diego Giuseppe Romano
The purpose of this study concerns numerical studies and experimental validation of the mechanical behavior of hybrid specimens. These kinds of composite specimens are made up of…
Abstract
Purpose
The purpose of this study concerns numerical studies and experimental validation of the mechanical behavior of hybrid specimens. These kinds of composite specimens are made up of thin carbon and glass substrates on which some Macro Fiber Composite® (MFC) piezoelectric patches are glued. A proper design and manufacturing of the hybrid specimens as well as testing activities have been performed. The research activity has been carried out under the FutureWings project, funded by the European Commission within the 7th Framework.
Design/methodology/approach
The paper describes the basic assumptions made to define specimen geometries and to carry out experimental tests. Finite element (FE) results and experimental data (laser technique measurements) have been compared: it shows very good agreement for the displacements’ distribution along the specimens.
Findings
Within the objectives of the project, the study of passive and active deformation characteristics of the hybrid composite material has provided reference technical data and has allowed for the correct adaptation of the FE models. More in particular, using the hybrid specimens, both the bending deformations and the torsion deformations have been studied.
Practical implications
The deformation capability of the hybrid specimens will be used in the development of prototypical three-dimensional structures, that, through the electrical control of the MFC patches, will be able to change the curvature of their cross section or will be able to change the angle of torsion along their longitudinal axis.
Originality/value
The design of nonstandard specimens and the tests executed represent a novelty in the field of structures using piezoelectric actuators. The numerical and experimental data of the present research constitute a small step forward in the field of smart materials technology.
Details
Keywords
Xuwei Jin, Shize Huang, Xiaowen Liu, Jing Zhou, Jinzhe Qin, Decun Dong and Xingying Li
Electromagnetic interference (EMI) on communication systems of unban rail transit can hardly be clarified because of complicated factors around railways. This paper aims to target…
Abstract
Purpose
Electromagnetic interference (EMI) on communication systems of unban rail transit can hardly be clarified because of complicated factors around railways. This paper aims to target this issue and extend experimental and theoretical analysis.
Design/methodology/approach
This paper take the Nanjing Dashengguan Bridge as an example, because it carries the most tracks in the world and bears three kinds of trains running through, providing a perfect complex environment. First, it investigates the three communication systems, terrestrial trunked radio, communications-based train control (CBTC) and passenger information system (PIS) that Nanjing Metro uses, and select appropriate devices accordingly. Second, it establishes a system level platform and conduct three tests to analyze their respective operating principles and performance difference under common electromagnetic environments. Third, it adopts theoretical formula to verify test results.
Findings
The experiment results and theoretical analysis mutually corroborate each other and present practical recommendations: an 8 m or more distance between two tracks will ensure no obvious EMI created by a passing train on communication systems; two certain communication systems should not share the same frequency band; interference level is more related to field strength than weathers and building materials; and CBTC DSSS waveguide mode as well as PIS LTE mode are preferred.
Originality/value
This research also provides a practical method of investigating EMI for other complex situations.
Details
Keywords
Md.Tanvir Ahmed, Hridi Juberi, A.B.M. Mainul Bari, Muhommad Azizur Rahman, Aquib Rahman, Md. Ashfaqur Arefin, Ilias Vlachos and Niaz Quader
This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining…
Abstract
Purpose
This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining process in a computer numerical control (CNC) lathe machine.
Design/methodology/approach
In this research, an integrated fuzzy TOPSIS-based Taguchi L9 optimization model has been applied for the multi-objective optimization (MOO) of the hard-turning responses. Additionally, the effect of vibration on the ceramic tool wear was investigated using Analysis of Variance (ANOVA) and Fast Fourier Transform (FFT).
Findings
The optimum cutting conditions for the multi-objective responses were obtained at 98 m/min cutting speed, 0.1 mm/rev feed rate and 0.2 mm depth of cut. According to the ANOVA of the input cutting parameters with respect to response variables, feed rate has the most significant impact (53.79%) on the control of response variables. From the vibration analysis, the feed rate, with a contribution of 34.74%, was shown to be the most significant process parameter influencing excessive vibration and consequent tool wear.
Research limitations/implications
The MOO of response parameters at the optimum cutting parameter settings can significantly improve productivity in the dry turning of hardened steel and control over the input process parameters during machining.
Originality/value
Most studies on optimizing responses in dry hard-turning performed in CNC lathe machines are based on single-objective optimization. Additionally, the effect of vibration on the ceramic tool during MOO of hard-turning has not been studied yet.
Details