Search results

The purpose of this study is to investigate the influence of institutional dynamics on road accidents and whether this relationship is moderated by information and communication technology (ICT).

The study adopted a quantitative approach with 133 respondents. Research hypotheses were tested in AMOS version 21. In addition, moderated regression analysis was used to test the moderating role of ICT on the relationship between institutional dynamics and road accidents.

The results show that vehicle maintenance, policy enforcement, safety culture, driver training and driver management positively influence road accidents. Moreover, the study established that ICT moderates the relationship between institutional dynamics and road accidents.

The results of this study serve as a practical guideline for policymakers in the road haulage sector. Managers may gain insights on how to design effective interventions to reduce road accidents.

This research contributes to the existing body of knowledge by exploring previously unexplored moderating paths in the relationship between institutional dynamics and road accidents. By highlighting the moderating role of ICT, the study sheds new light on the institutional dynamics that influence road accidents in the context of road haulage companies.

The purpose of this study is to analyze the environmental efficiency level and trend of the transportation sector in the upper–mid–downstream of the Yangtze River Economic Belt and the JingJinJi region in China and assess the effectiveness of policies for protecting the low-carbon environment.

This study uses the meta-frontier slack-based measure (SBM) approach to evaluate environmental efficiency, which targets and classifies specific regions into regional groups. First, this study employs the SBM with the undesirable outputs to construct the environmental efficiency measurement models of the four regions under the meta-frontier and group frontiers, respectively. Then, this study uses the technology gap ratio to evaluate the gap between the group frontier and the meta-frontier.

The analysis reveals several key findings: (1) the JingJinJi region and the downstream of the YEB had achieved the overall optimal production technology in transportation than the other two regions; (2) significant technology gaps in environmental efficiency were observed among these four regions in China; and (3) the downstream region of the YEB exhibited the lowest levels of energy consumption and excessive CO₂ emissions.

To evaluate the differences in environmental efficiency resulting from regions and technological gaps in transportation, this study employs the meta-frontier model, which overcomes the limitation of traditional environmental efficiency methods. Furthermore, in the practical, the study provides the advantage of observing the disparities in transportation efficiency performed by the Yangtze River Economic Belt and the Beijing–Tianjin–Hebei regions.

This paper aims to understand Chinese tourists’ changing shopping experience in Macao. In scrutinizing reviews posted in the pre-COVID and during COVID eras, the study has identified changing patterns in Chinese tourists’ shopping experiences, including increased leisure components while shopping, decreased luxury pursuits and an improved overall leisure and shopping experience because of decreased prices in accommodation and a less crowded retail and leisure environment. An emergent opportunity to provide “retail-tainment” experience is discussed.

The aim of this article is to present a model for the orchestration of dynamic capabilities (ODCs) in cleantech companies that aim to obtain competitive advantage in the market.

The authors present herein descriptive research guided by a qualitative multiple case study approach carried out with 12 cleantech companies.

The results have showed that the ODC model is present in the product/process cycle, thus providing new capabilities and generating sustainable competitive advantage through the research categories presented.

This study contributes to the literature on the ODCs through microfoundations based on evidence of companies inserted in technological and intensively dynamic contexts.

This article demonstrates, through the ODC model, the main capabilities and characteristics of the assets of cleantech companies and how the process of renewing competencies to obtain competitive advantage occurs.

The ODC model utilizes technological resources in the product/process cycle. Asset specificity and the capacity for innovation allow cleantech companies to explore regulatory loopholes, making their sustainable model innovative and obtaining competitive advantage through the renewal of entrepreneurial capabilities and competencies.

Building on the theory of brand psychological ownership, this paper aims to explore the mediating role of brand psychological ownership in the relationship between brand personality (innocence/coolness) and consumers’ preferences, as well as identify the boundary conditions of this relationship.

To test the hypotheses, a series of four experiments were conducted in Wuhan, a city in southern China, using questionnaires administered at two universities and two supermarkets. Hypotheses were tested using PLS-SEM in SmartPLS 4.

The results indicate that brand personality, specifically the dimensions of innocence and coolness, has a significant impact on consumers’ brand preferences. Brands with a cool personality are preferred over those with an innocent personality. Moreover, the relationship between brand personality and consumers’ brand preferences is moderated by power motivation and identity centrality.

This study contributes to the literature by differentiating between brand personality of innocence and coolness as two separate constructs and proposing brand psychological ownership as a mechanism through which brand personality affects brand preferences. The study’s samples were drawn from universities and supermarkets in southern China, providing evidence for the significant moderating effects of power motivation and identity centrality on consumers’ brand preferences.

This paper aims to present the vertical integration state-of-the-art and propose an expansion of the operations and supply chain management (OSCM) field by identifying gaps and bottlenecks.

This paper uses a systematic literature review based on a sample of 173 OSCM field articles, collected from Scopus and Web of Science databases.

There are no single factors, such as future costs, structures or skills development, in the decision to vertically integrate operations. It is necessary to combine the vision of production costs with the perspective of governance and transaction costs. In addition, it is essential to consider the competency perspective and its impact on capability building.

Few studies have attempted to understand how vertical integration is used in terms of OSCM research themes and theories. Vertical integration can help companies face challenges and serve as a potential solution for achieving better prices, demand control and quality management.

The significant role of vertical integration mechanisms in supply chains is crucial for managers evaluating a firm's reconfiguration with more vertical operations. Policymakers interested in supporting the smoothness of vertical integration decisions in regulatory agencies play a key role as contingencies.

In times of global challenges, vertical integration is a strategy known to be more effective for firms to obtain a competitive advantage, making them more resilient.

This paper addresses gaps in the vertical integration theme and provides insights for future research development.

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

This study intends to investigate how an employee's proactive personality and a supervisor's idiosyncratic deals (i-deals) relate to their subordinates' affective commitment (AC) and occupational well-being (OWB), in light of the mediating role of subordinates' i-deals, using proactive motivation theory and the job demand–resource (JD-R) model as theoretical foundations.

The study consisted of 342 employees working in the hospitality industry. To examine the proposed model, the researchers used the structural equation modelling approach and bootstrapping method in AMOS.

The results affirmed the influence of subordinates' proactiveness on AC and OWB, but no direct influence of supervisors' prior i-deals on subordinates' AC and OWB was established. When investigating the mediational role of subordinates' i-deals, a partial mediation effect was found between subordinates' proactive personality with AC and OWB, whereas full mediation was established between supervisors' i-deals and subordinates' AC and OWB.

These findings shed light on how i-deals improve AC and OWB for both groups of supervisors and subordinates. In an era of increasing competition amongst organizations operating within the hospitality industry, i-deals serve as a human resource strategy to recruit, develop and retain talented individuals.

The novelty of this research lies in its specific investigation of the combined influence of proactive personality as an individual factor and supervisors' i-deals as an organizational factor on subordinates' i-deals within the context of the hospitality industry. Furthermore, it aims to analyse the potential impact of these factors on AC and OWB.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.