Search results

China is by far the world’s largest energy consumer and importer. Reasonably forecasting the trend of China’s total energy consumption (CTEC) is of great significance. The purpose of this paper is to propose a new-structure grey system model (NSGM (1, 1)) to forecast CTEC.

Two matrices for computing the parameters of NSGM (1, 1) were defined and the specific calculation formula was derived. Since the NSGM (1, 1) model increases the number of its background values, which improves the smoothness effect of the background value and weakens the effects of extreme values in the raw sequence on the model’s performance; hence it has better simulation and prediction performances than traditional grey models. Finally, NSGM (1, 1) was used to forecast China’s total energy consumption during 2016-2025. The forecast showed CTEC will grow rapidly in the next ten years.

Therefore, in order to meet the target of keeping CTEC under control at 4.8 billion tons of standard coal in 2020, Chinese government needs to take necessary measures such as transforming the economic development pattern and enhancing the energy utilization efficiency.

A new-structure grey forecasting model, NSGM (1, 1), is proposed in this paper, which improves the smoothness and weakens the effects of extreme values and has a better structure and performance than those of other grey models. The authors successfully employ the new model to simulate and forecast CTEC. The research findings could aid Chinese government in formulating energy policies and help energy exporters make rational energy yield plans.

The purpose of this study is to make a prediction of China's energy consumption structure from the perspective of compositional data and construct a novel grey model for forecasting compositional data.

Due to the existing grey prediction model based on compositional data cannot effectively excavate the evolution law of correlation dimension sequence of compositional data. Thus, the adaptive discrete grey prediction model with innovation term based on compositional data is proposed to forecast the integral structure of China's energy consumption. The prediction results from the new model are then compared with three existing approaches and the comparison results indicate that the proposed model generally outperforms existing methods. A further prediction of China's energy consumption structure is conducted into a future horizon from 2021 to 2035 by using the model.

China's energy structure will change significantly in the medium and long term and China's energy consumption structure can reach the long-term goal. Besides, the proposed model can better mine and predict the development trend of single time series after the transformation of compositional data.

The paper considers the dynamic change of grey action quantity, the characteristics of compositional data and the impact of new information about the system itself on the current system development trend and proposes a novel adaptive discrete grey prediction model with innovation term based on compositional data, which fills the gap in previous studies.

The energy efficiency of buildings has been emphasized along with the continual development in the building and construction sector that consumes a significant amount of energy. To this end, the purpose of this research paper is to forecast energy consumption to improve energy resource planning and management.

This study proposes the application of the convolutional neural network (CNN) for estimating the electricity consumption in the Grey Nuns building in Canada. The performance of the proposed model is compared against that of long short-term memory (LSTM) and multilayer perceptron (MLP) neural networks. The models are trained and tested using monthly electricity consumption records (i.e. from May 2009 to December 2021) available from Concordia’s facility department. Statistical measures (e.g. determination coefficient [R²], root mean squared error [RMSE], mean absolute error [MAE] and mean absolute percentage error [MAPE]) are used to evaluate the outcomes of models.

The results reveal that the CNN model outperforms the other model predictions for 6 and 12 months ahead. It enhances the performance metrics reported by the LSTM and MLP models concerning the R², RMSE, MAE and MAPE by more than 4%, 6%, 42% and 46%, respectively. Therefore, the proposed model uses the available data to predict the electricity consumption for 6 and 12 months ahead. In June and December 2022, the overall electricity consumption is estimated to be 195,312 kWh and 254,737 kWh, respectively.

This study discusses the development of an effective time-series model that can forecast future electricity consumption in a Canadian heritage building. Deep learning techniques are being used for the first time to anticipate the electricity consumption of the Grey Nuns building in Canada. Additionally, it evaluates the effectiveness of deep learning and machine learning methods for predicting electricity consumption using established performance indicators. Recognizing electricity consumption in buildings is beneficial for utility providers, facility managers and end users by improving energy and environmental efficiency.

The purpose of this paper is to find a method that has high precision to forecast the energy consumption of China’s manufacturing industry. The authors hope the predicted data can provide references to the formulation of government’s energy strategy and the sustained growth of economy in China.

First, the authors respectively make use of regression prediction model and grey system theory GM(1,1) model to construct single model based the data of 2001-2010, analyze the advantages and disadvantages of single prediction models. The authors use the data of 2011 and 2012 to test the model. Second, the authors propose combination forecasting model of manufacturing’s energy consumption in China by using standard variance to allocate the weight. Finally, this model is applied to forecast China’s manufacturing energy consumption during 2013-2016.

The result shows that the combination model is a better one with higher accuracy; the authors can take the model as an effective tool to predict manufacturing’s energy consumption in China. And the energy consumption of China’s manufacturing industry continued to show a steady incremental trend.

This method takes full advantages of the effective information reflected by the single model and improves the prediction accuracy.

The purpose of this paper is to provide a method for planning and controlling energy budgets for an industrial plant. The developed method aims to obtain a very high confidence of predicted electrical energy cost to include into the estimation of budget and a continuous control of energy consumption and cost.

The authors propose a methodology that refines effectiveness and efficiency of budget estimation. The method relies on a three‐stage analysis: energy consumption characterization and forecasting, energy budget formulation and energy budget control. In particular, this paper deals deeply with the second and the third stages, i.e. energy budgeting and control. The methodology has been developed on the basis of a continuous improvement philosophy and project management techniques. A discussed case study shows the potential of the methodology in order to discover energy consumption inefficiencies.

Energy budgeting and control has been implemented within a set of first and second level metrics. The first level indicators allow identifying the effect of an increase of specific consumption beyond the predicted. The second level indicators allow identifying the effect of variations of price, volume, mix or loading bands from the predicted.

In the paper climatic variations are not considered, limiting the energy drivers to those related to production volumes.

The method can be considered as a practical guide for energy budget planning and control of any industrial consumer.

A new approach to energy budgeting and control is proposed, allowing the impact of different specific consumption or production plans (volume, mix, and load bands) to be calculated.

The current challenge for forecasting smart meters electricity consumption lies in the uncertainty and volatility of load profiles. Moreover, forecasting the electricity consumption for all the meters requires an enormous amount of time. Most papers tend to avoid such complexity by forecasting the electricity consumption at an aggregated level. This paper aims to forecast the electricity consumption for all smart meters at an individual level. This paper, for the first time, takes into account the computational time for training and forecasting the electricity consumption of all the meters.

A novel hybrid autoregressive-statistical equations idea model with the help of clustering and whale optimization algorithm (ARSEI-WOA) is proposed in this paper to forecast the electricity consumption of all the meters with best performance in terms of computational time and prediction accuracy.

The proposed model was tested using realistic Irish smart meters energy data and its performance was compared with nine regression methods including: autoregressive integrated moving average, partial least squares regression, conditional inference tree, M5 rule-based model, k-nearest neighbor, multilayer perceptron, RandomForest, RPART and support vector regression. Results have proved that ARSEI-WOA is an efficient model that is able to achieve an accurate prediction with low computational time.

This paper presents a new hybrid ARSEI model to perform smart meters load forecasting at an individual level instead of an aggregated one. With the help of clustering technique, similar meters are grouped into a few clusters from which reduce the computational time of the training and forecasting process. In addition, WOA improves the prediction accuracy of each meter by finding an optimal factor between the average electricity consumption values of each cluster and the electricity consumption values for each one of its meters.

This paper aims to study the present situation of Tianjin industrial energy consumption carbon emissions and put forward constructive suggestions for future energy-saving emission reduction work.

Using the energy consumption data form the Tianjin’s Industrial Energy Efficiency Guide (TJBS, 2009-2013) and Tianjin’s Statistical Yearbook (NBS, 2006-2012), some models were able to predict the future with a high degree of accuracy.

With an average error of 3.06 per cent for the logistic regression model and an average error of 2.03 per cent for the gray model, the R2 for the energy elasticity model is 0.99158. It also indicated that between 2008 and 2012, the energy consumption per unit of industrial added value decreased by approximately 33.61 per cent. These results show that energy-saving efforts and the optimization of the industrial structure have increased the energy efficiency of Tianjin.

The authors think that their contribution refers to a combination between methodology of forecasting and industrial energy consumption.

Liberalisation of the European electricity sector has allowed the industrial consumers to freely choose their electricity suppliers. Proliferation of different contract proposals for such supply means that all proposals need to be carefully evaluated for correct supplier renewal choice. The purpose of this paper is to propose a methodology for the evaluation of heterogeneous proposals of electricity supply that would help industrial consumers to be ready to face supply contractors.

The method relies on a three‐stage analysis: characterisation of electricity consumption in the industrial process; demand forecasts based on energy drivers and consumption characterisation; and finally a detailed tariff analysis. The method is illustrated through a case study of a renewal contract of an Italian industrial plant with a 20 percent incidence of electrical energy cost on the final product. The investigation also includes a sensitivity analysis on combustible basket price and the distribution of daily working load.

The evaluation of 14 proposals for the case study was carried out and the best offer for the case study company was selected. However, the overall price variation is 4 percent among different proposals and the electrical energy price shows an increase of 12 percent compared with the previous year. This suggests limited effectiveness of the competitive market in the Italian context.

The method can be considered as a practical guide for the electrical energy contract renewal process of any industrial consumer that would help minimize its cost.

The proposed method is based on an innovative investigation of the consumption characterisation of the industry based on energy drivers. This approach allows the industries to develop their own strategies for the contract renewal. The analysis presented here could be expanded to include more specific supply clauses for a more comprehensive analysis.

Traditional grey models are integer order whitening differential models; these models are relatively effective for the prediction of regular raw data, but the prediction error of irregular series or shock series is large, and the prediction effect is not ideal.

The new model realizes the dynamic expansion and optimization of the grey Bernoulli model. Meanwhile, it also enhances the variability and self-adaptability of the model structure. And nonlinear parameters are computed by the particle swarm optimization (PSO) algorithm.

Establishing a prediction model based on the raw data from the last six years, it is verified that the prediction performance of the new model is far superior to other mainstream grey prediction models, especially for irregular sequences and oscillating sequences. Ultimately, forecasting models are constructed to calculate various energy consumption aspects in Chongqing. The findings of this study offer a valuable reference for the government in shaping energy consumption policies and optimizing the energy structure.

It is imperative to recognize its inherent limitations. Firstly, the fractional differential order of the model is restricted to 0 < a < 2, encompassing only a three-parameter model. Future investigations could delve into the development of a multi-parameter model applicable when a = 2. Secondly, this paper exclusively focuses on the model itself, neglecting the consideration of raw data preprocessing, such as smoothing operators, buffer operators and background values. Incorporating these factors could significantly enhance the model’s effectiveness, particularly in the context of medium-term or long-term predictions.

This contribution plays a constructive role in expanding the model repertoire of the grey prediction model. The utilization of the developed model for predicting total energy consumption, coal consumption, natural gas consumption, oil consumption and other energy sources from 2021 to 2022 validates the efficacy and feasibility of the innovative model.

These findings, in turn, provide valuable guidance and decision-making support for both the Chinese Government and the Chongqing Government in optimizing energy structure and formulating effective energy policies.

This research holds significant importance in enriching the theoretical framework of the grey prediction model.

The highlights of the paper are as follows:

1. A novel grey Bernoulli prediction model is proposed to improve the model’s structure.

2. Fractional derivative, fractional accumulating generation operator and Bernoulli equation are added to the new model.

3. The proposed model can achieve full compatibility with the traditional mainstream grey prediction models.

4. Energy consumption in Chongqing verifies that the performance of the new model is much better than that of the traditional grey models.

5. The research provides a reference basis for the government to formulate energy consumption policies and optimize energy structure.

A novel grey Bernoulli prediction model is proposed to improve the model’s structure.

Fractional derivative, fractional accumulating generation operator and Bernoulli equation are added to the new model.

The proposed model can achieve full compatibility with the traditional mainstream grey prediction models.

Energy consumption in Chongqing verifies that the performance of the new model is much better than that of the traditional grey models.

The research provides a reference basis for the government to formulate energy consumption policies and optimize energy structure.

Considering the small sample size and non-linear characteristics of historical energy consumption data from certain provinces in Southwest China, the authors propose a hybrid accumulation operator and a hybrid accumulation grey univariate model as a more accurate and reliable methodology for forecasting energy consumption. This method can provide valuable decision-making support for policy makers involved in energy management and planning.

The hybrid accumulation operator is proposed by linearly combining the fractional-order accumulation operator and the new information priority accumulation. The new operator is then used to build a new grey system model, named the hybrid accumulation grey model (HAGM). An optimization algorithm based on the JAYA optimizer is then designed to solve the non-linear parameters θ, r, and γ of the proposed model. Four different types of curves are used to verify the prediction performance of the model for data series with completely different trends. Finally, the prediction performance of the model is applied to forecast the total energy consumption of Southwest Provinces in China using the real world data sets from 2010 to 2020.

The proposed HAGM is a general formulation of existing grey system models, including the fractional-order accumulation and new information priority accumulation. Results from the validation cases and real-world cases on forecasting the total energy consumption of Southwest Provinces in China illustrate that the proposed model outperforms the other seven models based on different modelling methods.

The HAGM is used to forecast the total energy consumption of the Southwest Provinces of China from 2010 to 2020. The results indicate that the HAGM with HA has higher prediction accuracy and broader applicability than the seven comparative models, demonstrating its potential for use in the energy field.

The HAGM(1,1) is used to predict energy consumption of Southwest Provinces in China with the raw data from 2010 to 2020. The HAGM(1,1) with HA has higher prediction accuracy and wider applicability compared with some existing models, implying its high potential to be used in energy field.

Theoretically, this paper presents, for the first time, a hybrid accumulation grey univariate model based on a new hybrid accumulation operator. In terms of application, this work provides a new method for accurate forecasting of the total energy consumption for southwest provinces in China.