Search results

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.

The food industry is continuously developing its online services called food delivery applications (FDAs). This study aims to evaluate FDA's importance–performance and identify strategies to maximize its potential gains from a business partner's perspective.

Data are collected from 208 FDA partners in Indonesia. Importance–performance analysis (IPA) is applied to evaluate the FDA feature and extended the theory of potential gain in customer value (PGCV) to achieve potential gains from FDA business partners.

This study provides a clear and measurable direction for future research to develop FDA performance. Owning customer data, revenue sharing and competitive advantage are the most potential gains from joining the FDA from the business partner perspective.

The respondents are restaurants from the micro, small, and medium enterprises levels. Further research should involve middle to upper level restaurants to discover all business partners' perceptions. This will be very helpful for FDA providers interested in improving the best performance for all their partners.

FDA providers must focus on improving and maintaining the features of owning customer data, revenue sharing, competitive advantage, stable terms and conditions, customer interface, building customer loyalty, online presence, user credit rating, promotion and offers, delivery service and sales enhancement to increase consumer satisfaction and meet the expectations desired by business partners.

This research provides a meaningful theoretical foundation for future work. It extends the theory of PGCV using the value of a partner perspective as a substitute for customer value; hence, the authors call it a potential gain in partner value.

This paper aims to explore how leaders can develop value-based leadership for sustainable quality development in Lean manufacturing.

A qualitative meta-analysis was conducted using data from a three-year study of Lean manufacturing in Sweden using the Shingo business excellence model as an analytical framework.

This study demonstrates that leaders can develop value-based leadership to support Lean manufacturing by defining and articulating the organization’s values and accompanying behaviors that are needed to support the strategic direction; creating forums and time for leaders to identify the why behind decisions and reflect on their experiences to be able to lead a transformative process; and using storytelling to create a coaching culture to connect values and behaviors, to the processes and systems of work.

This paper contributes insights for developing value-based leadership to support a systemic approach to sustainable quality development in lean manufacturing. Findings are based on a limited case sample size of three manufacturing companies in Sweden.

The findings were derived using a unique methodological approach combining storytelling, appreciative inquiry and coaching with traditional data collection methods including surveys and interviews to identify, define and shape value-based leadership in Lean manufacturing.

Current research aims to investigate the relationships between Chinese national cultural values (uncertainty avoidance (UA), power distance, masculinity (MAS), individualism (IDV) and Confucian dynamism) and accounting practices (professionalism, uniformity, conservatism and secrecy).

A sample of 842 users/preparers of financial statements participated in this cross-sectional, questionnaire-based survey from China. Covariance-based structural equation modeling (CB-SEM) was used to test the proposed relationship.

Results show that cultural values strongly impact financial reporting practices in China. Chinese society is characterized by low UA, high power distance, collectivism, future orientation (Confucianism) and masculine traits. These values show an overall preference for uniformity, conservatism and secrecy in financial reporting with weak professionalism. The findings show that Chinese society emphasizes law abidance, strict codes of conduct, written rules and regulations and respect for consistent orthodox measures.

This study provides valuable input for policymakers in developing regulations and accounting standards in the Chinese market. Understanding the relationship between cultural dimensions and accounting values helps to address societal challenges and align policies with cultural values to acquire desired financial reporting values. Global firm managers must consider cultural dimensions in accounting when entering Chinese markets or negotiating with partners from different cultures. Findings also suggest local managers gain self-awareness of their cultural biases and accounting values, enabling them to navigate businesses and society's financial reporting needs.

This study enriches the existing literature on cultural and accounting practice studies by validating the role of stakeholder and social contract theories in Gray–Hofstede’s framework and highlighting the influence of dominant cultural values on accounting values. The study provides a unique empirical analysis of the Chinese market by using a questionnaire survey and structural equation modeling (SEM). Further, it also opens avenues for future research on the relationship between cultural dimensions, accounting practices and their global impact. These findings emphasize the importance of cultural sensitivity and adaptability, especially in multicultural environments.

Applying the stimulus-organism-response (S-O-R) theory in a wine museum context, this paper aims to examine how and why experience design characteristics influence visitor satisfaction, particularly investigating the role of epistemic (learning) and hedonic (having fun) values as the underlying mechanisms of this relationship.

The authors collected field survey data from 652 visitors at a world-leading wine museum. The authors tested the research model on ten modules of the museum using path analysis and a bootstrap approach; the authors further conducted mediation analyses to test how the design of the museum’s modules influenced perceived value and satisfaction.

Content comprehensibility and surprise, as well as interactivity and ease of use, are core design characteristics that drive visitor satisfaction. More significantly, hedonic and epistemic values play a significant mediating role in influencing the relationship between design characteristics and visitor satisfaction.

The authors provide clear and actionable recommendations to help managers design museums that provide educational, entertaining and satisfying visitor experiences.

To the best of the authors’ knowledge, this is the first study to apply the S-O-R theory in a wine museum context. The significance of this study lies in demonstrating how and why experience design characteristics support the creation of an edutainment visitor experience that drives visitor satisfaction.

The discontinuous usage behavior of short video social media presents an ongoing challenge to platform development. The purpose of this study is to investigate the antecedents of intentions to short media discontinuous usage.

This study adopts a Cognition–Affection–Conation (CAC) framework to analyze short video social media discontinuous intention on the basis of cognitive dissonance theory (CDT) and self-efficacy theory. The empirical evaluation of the research model was conducted using SmartPLS 2.0 and was based on questionnaire data obtained from participants in China.

The results show information overload and user addiction have a significant positive association with cognitive dissonance, which is, in turn, found to significantly impact discontinuous usage intention. Self-efficacy moderates the relationships between information overload, user addiction, cognitive dissonance and discontinuous usage.

This study contributes to the understanding of the factors that influence short video discontinuous usage intention and it achieves this by engaging from a CDT perspective and by applying Self-Efficacy Theory. Theoretical implications for future short video platform research, as well as practical suggestions for short video platform operators and users, are also discussed.

The purpose of this paper is to explore existing and desired methodologies for systematic quality work to promote quality in preschools from the principal’s perspective.

A collaborative approach was used in this research project, and principals were asked to complete portfolio assignments. Their answers to those portfolio assignments were analysed by the research team and subsequently compared to total quality management values.

Existing and desired methodologies for systematic quality work are presented and sorted into 13 and 17 groups, respectively. The principals desire four times more methodologies than they are presently using to promote systematic quality work, and the results show that they must extend their methodologies to support TQM values.

This research is based on answers collected from 18 principals in one municipality in Sweden.

The use of the cornerstone model provides a framework to illustrate the application of TQM in preschools.

Principals struggle to find time for systemic quality work. The presented results can be used to work systematically with quality in preschools and other organizations.

This paper focuses on the application of a robotic technique for modeling a three-wheeled mobile robot (WMR), considering it as a multibody polyarticulated system. Then the dynamic behavior of the developed model is verified using a physical model obtained by Simscape Multibody.

Firstly, a geometric model is developed using the modified Denavit–Hartenberg method. Then the dynamic model is derived using the algorithm of Newton–Euler. The developed model is performed for a three-wheeled differentially driven robot, which incorporates the slippage of wheels by including the Kiencke tire model to take into account the interaction of wheels with the ground. For the physical model, the mobile robot is designed using Solidworks. Then it is exported to Matlab using Simscape Multibody. The control of the WMR for both models is realized using Matlab/Simulink and aims to ensure efficient tracking of the desired trajectory.

Simulation results show a good similarity between the two models and verify both longitudinal and lateral behaviors of the WMR. This demonstrates the effectiveness of the developed model using the robotic approach and proves that it is sufficiently precise for the design of control schemes.

The motivation to adopt this robotic approach compared to conventional methods is the fact that it makes it possible to obtain models with a reduced number of operations. Furthermore, it allows the facility of implementation by numerical or symbolical programming. This work serves as a reference link for extending this methodology to other types of mobile robots.

A prime objective of the Swachh Bharat Abhiyan (SBA; Clean India Mission) is to motivate people to segregate their household waste. The purpose of this study is to assess the ground reality of waste management behaviour of Delhi residents with the help of a modified Value–Belief–Norm (VBN) model. Past researches point the need to include cost as a variable in the VBN model. This study fulfils this need and tests cost as one of the variables on the gathered data.

The research data were gathered by interacting with the people and the civic staff in the jurisdiction of the three Delhi municipalities through a stratified sampling technique (N = 250). The structural equation modelling was used to analyse the collected data.

The modified VBN model explains the waste management behaviour, but the variables do not follow the exact causal chain. Values, awareness of consequences, ascription of responsibility and personal norms all explain the resident's waste management behaviour. However, cost limits the resident's waste management behaviour.

The study could only achieve a moderate model fit; its sample size was small; and data were collected through self-reported questionnaire.

Three main practical implications of the study are: (1) While designing waste management solutions, due importance must be given to the cost to be borne by people for adopting these solutions. (2) Design such interventions that target residents' values to convince them to make the desired behavioural change. (3) People need be educated about the ways to sort waste and made aware of the importance of waste segregation in eradicating the urban waste mess.

The paper is an original contribution to testing a modified VBN model in predicting waste management behaviour. The modified model includes cost as a variable missing in the previous research. This research is useful in the backdrop of the SBA and provides suggestions for policymakers and pro-environment researchers.

This article evaluates how consumer expectations evolve over time and if three antecedents (negative experiences, alternative attractiveness and level of visitation) explain possible changes in expectations.

A conceptual model is structured with six hypotheses that are tested through articulated studies. First, a study with a longitudinal approach is developed and applied to a sample of students. Data collection is carried out over three periods and a latent growth model (LGM) is applied. Further ahead, another essay is developed to reexamine the moderating role of corporate image and level of visitation on the effect of negative experiences on expectations. For this, the role-playing approach is applied.

Study 1 reveals that patterns of expectations change from one service meeting to another, and these mutations are influenced by negative experiences and alternative attractiveness. Three pieces of evidence are highlighted. First, negative experiences produce contradictory and simultaneous movements in consumer expectations. Negative experiences reduce desired expectations and, at the same time, increase adequate expectations. These effects change in magnitude because of the corporate image. This confirms the moderating role of the corporate image in the relationship between negative experiences and expectations. This does not happen with the level of visitation, in which the moderating function is not sustained. The findings about moderating effects are confirmed by Study 2. Second, as customers have alternative companies, the minimum level of expectation rises. Alternative attractiveness positively impacts only adequate expectations. Third, the results do not support the relationship between the level of visitation and expectations. This reveals that more frequent customers do not necessarily have higher expectations.

This paper is the first to provide empirical results about the moderating effects of corporate image and level of visitation on the relationship between negative experiences and expectations.