Search results

Everyone is extremely concerned about environmental protection and health safety due to the rise in living standards. Plant-derived natural dyes have garnered much industrial attention in food, pharmaceutical, textile, cosmetics, etc. owing to their health and environmental benefits. The present study aims to focus on the elimination of the use of synthetic dyes and provides brief information about natural dyes, their sources, extraction procedures with characterization and various advantages and disadvantages.

In producing natural colors, extraction and purification are essential steps. Various conventional methods used till date have a low yield, as these consume a lot of solvent volume, time, labor and energy or may destroy the coloring behavior of the actual molecules. The establishment of proper characterization and certification protocols for natural dyes would improve the yielding of natural dyes and benefit both producers and users.

However, scientists have found modern extraction methods to obtain maximum color yield. They are also modifying the fabric surface to appraise its uptake behavior of color. Various extraction techniques such as solvent, aqueous, enzymatic and fermentation and extraction with microwave or ultrasonic energy, supercritical fluid extraction and alkaline or acid extraction are currently available for these natural dyes and are summarized in the present review article.

If natural dye availability can be increased by the different extraction measures and the cost of purified dyes can be brought down with a proper certification mechanism, there is a wide scope for the adoption of these dyes by small-scale dyeing units.

Toner is a crucial dry colorant composite used in printing based on the electrophotographic process. The quality of printed images is greatly influenced by the toner production method and material formulation. Chemically in situ polymerization methods are currently preferred. This paper aims to optimize the characteristics of a composite produced through emulsion polymerization using common raw materials for electrophotographic toner production.

Emulsion polymerization provides the possibility to optimize the physical and color properties of the final products. Response surface methodology (RSM) was used to optimize variables affecting particle size (PS), PS distribution (PSD), glass transition temperature (T_g°C), color properties (ΔE) and monomer conversion. Box–Behnken experimental design with three levels of styrene and butyl acrylate monomer ratios, carbon black pigment and sodium dodecyl sulfate surfactant was used for RSM optimization. Additionally, thermogravimetric analysis and surface morphology of composite particles were examined.

The results indicated that colorants with small PS, narrow PSDs, spherical shape morphology, acceptable thermal and color properties and a high percentage of conversion could be easily prepared by optimization of material parameters in this method. The anticipated outcome of the present inquiry holds promise as a guiding beacon toward the realization of electrographic toner of superior quality and exceptional efficacy, a vital factor for streamlined mass production.

To the best of the authors’ knowledge, for the first time, material parameters were evaluated to determine their impact on the characteristics of emulsion polymerized toner composites.

Key core technology is the most important weapon of the country, and breaking through the “strangled” problem is one of the real problems that China’s emerging industries and enterprises must solve. Accurately identifying the “strangled” problem will help China accelerate the realization of high-level scientific and technological self-reliance and win the battle against key core technologies.

Combined with the characteristics of key core technologies, the key core technology evaluation system was constructed from four dimensions: technology innovation, technology radiation, technology economy and technology safety. We adopt the entropy TOPSIS method to evaluate the patents, and the patents with the top 5% scores are identified as key core technology patents. Then, this study identifies key core technology “strangled” problems in three dimensions: technology value advantage, competitive advantage and quantitative advantage.

Taking the patent data of the global new generation information technology industry from 2011 to 2023 as a sample, 178 moderately “strangled” technologies and 49 severely “strangled” technologies are selected. The study results are consistent with the current situation of the new generation information technology industry’s development, and verify the feasibility and reliability of the key core technology “strangled” problem identification model.

This study uses patent data to identify key core technologies and “Strangled” in the new generation information technology industry. It can provide a reference for relevant national departments and agencies, as well as universities and enterprises.

With the development of science and technology, more creators are trying to use new crafts to represent the cultural trends of the social media era, which makes cultural heritage innovative and new genres emerge. This compels the academic community to examine craft from a new perspective. It is very helpful to understand the hidden representational structure of craft more deeply and improve the craft innovation system of cultural and creative products that we deconstruct the craft based on Complex Network and discover its intrinsic connections.

The research crawled and cleaned the craft information of the top 20% products on the Forbidden City’s cultural and creative products online and then performed Complex Network modeling, constructed three craft representation networks among function, material and technique, quantified and analyzed the inner connections and network structure of the craft elements, and then analyzed the cultural inheritance and innovation embedded in the craft representation networks.

The three dichotomous craft representation networks constructed by combining function, material and technique: (1) the network density is low and none of them has small-world characteristics, indicating that the innovative heritage of the craft elements in the Forbidden City’s cultural and creative products is at the stage of continuous exploration and development, and multiple coupling innovation is still insufficient; (2) all have scale-free characteristics and there is still a certain degree of community structure within each network, indicating that the coupling innovation of craft elements of the Forbidden City’s cultural and creative products is seriously uneven, with some specific “grammatical combinations” and an Island Effect in the network structure; (3) the craft elements with high network centrality emphasize the characteristics of decorative culture and design for the masses, as well as the pursuit of production efficiency and economic benefits, which represent the aesthetic purport of contemporary Chinese society and the ideological trend of production and life.

The Forbidden City’s cultural and creative products should continue to develop and enrich the multi-coupling innovation of craft elements, clarify and continue their own brand unique craft genes, and make full use of the network important nodes role.

The rise of Industry 4.0 led to digitally-enabled evolutionary and radical changes in all branches of the retail industry, resulting in the emergence of the distinct term “Retail 4.0”. Within this paradigm, particular emphasis is placed on forming a balanced system of omnichannel sales and customer service, allowing reaching a synergistic effect in the face of constant changes, turbulence and uncertainty in the business environment. The main objective of this study is to offer and justify a practical strategy for optimal utilization of sales channels and customer service provision within the Retail 4.0 paradigm.

The conceptual argument of the study is based on the review of the literature and illustrative case studies

The decision-making model proposed in this study provides a roadmap for retailers. It underscores the need for a data-driven approach, where decisions are informed by real-time analytics and customer insights. This model also advocates for a flexible yet structured approach to managing various sales channels, ensuring that each channel complements and enhances the other.

The study offers and justifies an original five-stage process model for forming a balanced system of omnichannel sales and customer service.

The purpose of this paper is to introduce four new organic dyes based on naphthalimide for dye-sensitized solar cells (DSSCs).

Four new dyes based on naphthalimide with substitutions of amine and acetylamine in position C4 were designed in conjugation with substituted carbazole as donor–acceptor (D-A) architecture. The absorption and emission characteristics of the prepared dyes were evaluated in H₂O, DMF and their mixture (DMF:H₂O = 1:1). The feasibility of electron transfer in the DSSCs structure and energy levels were evaluated using electrochemical and density functional theory, which confirm the use of dyes in the DSSCs structure. The DSSCs were prepared using an individual strategy and their optical properties were investigated under the light of AM 1.5.

The prepared dyes exhibit orange color with strong emission at λem = 530–570 nm due to charge transfer with a positive solvatochromic effect. The efficiency of DSSCs based on Dye1-4 1 is: 3.69%, 3.71%, 4.69% and 4.76%. Therefore, the power efficiency increases by about 29 % in the presence of acetylamine group.

The design of new structures of organic dyes should be accompanied by the development of optical and electrical properties. In other words, in addition to the continuous production of electrons, efficient dyes must also be resistant to light to increase the life of the device.

Organic dyes play a key role in the production of electrons in the DSSCs structure. The engineering of these structures and the introduction of widely used but low cost types can play an important role in the development of clean energy production.

The application of organic dyes based on naphthalimide was evaluated in the DSSCs structure and its photovoltaic properties were investigated.

Agricultural waste and food sources are some of the pollutants of the environment. One of these wastes is the peel of fruits that cannot be consumed as food. In this regard, walnut husk (WH) and oleaster peel (PO) are known as two important sources of tannin and are bulky wastes. Because of the high percentage of tannin, these materials can be used as a natural source for the preparation of bio-mordant in the dyeing process.

In this study, Reseda and Madder were used as natural dyes in the presence of a mixture of two bio-mordants. WH and PO were selected as bio-mordant. All natural resources are extracted to obtain the juice. The phenolic percentage of tannin-containing extracts was evaluated and then it was used for wool yarns by premordanting method. The results of evaluating the fastness properties using the ISO method.

The most important achievement of this research is the use of agricultural waste in the dyeing process to reduce environmental pollution and create added value. All compounds rich in tannin have some phenolic components, therefore the amount of phenolic content of these extracts was evaluated. The effect of mixing the mordant on the color characteristics of the yarns was investigated and the results showed that changing the ratio of the combination of two mordant is effective on the K/S values. The results of evaluating the fastness properties using the ISO method showed that the washing, rubbing and light fastness in the presence of mordant is good, good and moderate, respectively.

In this paper, to the best of the authors’ knowledge, for the first time, the combination of two natural extracts obtained from agricultural waste has been used to create a new bio-mordant on fibers and improve stability.

This study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve good dyeing depth, fastness and ultraviolet (UV) protection.

Firstly, single factor experiments were used to determine the basic dyeing conditions of Coreopsis tinctoria. The optimal process conditions for direct dyeing were determined through orthogonal experiments. After that, the dyeing with mordant was used. Based on the previously determined optimal process conditions, silk fabrics were dyed with different mordanting methods, with different mordants and mordant dosages. The dyeing results were compared, in terms of the K/S values of the dyed fabrics, to determine the most appropriate dyeing conditions with mordant.

The extract of Coreopsis tinctoria can dye silk fabrics satisfactorily. Good dyeing depth and fastness can be obtained by using suitable dyeing methods and dyeing conditions, especially when using the natural mordant pomegranate rind and the rare earth mordant neodymium oxide. The silk fabrics dyed with Coreopsis tinctoria have good UV resistance, which allows a desirable finishing effect to be achieved while dyeing, using a safe and environmentally friendly method.

The composition of Coreopsis tinctoria is complex, and the specific composition of colouring the silk fibre has not been determined. There are many factors that affect the dyeing experiment, which have an impact on the experimental results.

The results of this study may help expand the application of Coreopsis tinctoria beyond medicine.

To the best of the authors’ knowledge, this paper is the first report on dyeing silk with the extract of Coreopsis tinctoria achieving good dyeing results. Its depth of staining and staining fastness were satisfactory. Optimum dyeing method and dyeing conditions have been identified. The fabric dyed with Coreopsis tinctoria has good UV protection effect, which is conducive to improving the application value of the dyeing fabric. The findings help offer a new direction for the application of medicinal plants in the eco-friendly dyeing of silk.

In the denim industry, enzyme washing and its combination with stone washing are generally used to get the desired worn-out look. However, these conventional methods include high water, energy and time consumption. Nowadays, laser fading, which is a computer-controlled, dry, ecological finishing method, is preferred in the denim fading process. The purpose of this study is to observe the effects of chemical pretreatment applications on laser-faded denim fabric in terms of color and mechanical properties. To eliminate the enzyme washing process in denim fading and to minimize the disadvantages of laser fading, such as decreased mechanical properties and increased fabric yellowness, various chemical pretreatment applications were applied to the denim fabric before laser fading, followed by simple rinsing instead of enzyme washing.

Two different indigo-dyed, organic cotton denim fabrics with different unit weights were exposed to pretreatment processes and then laser treatment, followed by simple rinsing. Polysilicic acid, boric acid, borax and bicarbonate were used for pretreatment processes, and laser treatment was carried out under optimized laser parameters (40 dpi resolution and 300 µs pixel time). Tensile strength was tested, and color values (CIE L*, a*, b*, ΔE*, C* and h), color yield (K/S), yellowness and whiteness indexes were measured to identify the color differences.

Before laser fading, 30 g/L and 40 g/L polysilicic acid pretreatments for sulfur-indigo-dyed fabric and a mixture of 10 g/L boric acid and 10 g/L borax pretreatments for the fabric only indigo-dyed were recommended for the laser fading with sufficient mechanical properties and good color values.

With the chemical pretreatments defined in this study, it was possible to reduce yellowness and maintain the mechanical properties after laser fading, thus minimizing the disadvantages of laser treatment and also eliminating enzyme washing.

The purpose of this study is the synthesis and characterization of a CMYK palette (cyan of Cr-BiVO₄, magenta of Pr-CeO₂, yellow of Bi-(Ce,Zr)O₂ composite and black of YMnO₃) as an eco-friendly polyfunctional palette that combines (a) high near-infrared reflectance (cool pigments) that allows moderate temperatures in indoor environments and the urban heat island effect; (b) photocatalytic activity for the degradation of organic contaminants of emerging concern of substrates in solution (such as Orange II or methylene blue) and gaseous (NO_x and volatile organic compounds such as acetaldehyde or toluene); (c) X-ray radiation attenuators associated with bismuth ions; and (d) biocidal effect combined with co-doping with bactericidal agents.

Pigments were prepared by a solid-state reaction and characterized by X-ray diffraction, diffuse reflectance spectroscopy, photocatalytic activity over Orange II and scanning electron microscopy.

The behaviour of the proposed palette was compared to that of a commercial inkjet palette, and an improvement in all functionalities was observed.

The functionalities of pigments allow the building envelope and indoor walls to exhibit temperature-moderating effects (with the additional effects of moderating global warming and increasing air conditioning efficiency), purification and disinfection of both indoor and outdoor air, and radiation attenuation.

The proposed palette and its polyfunctional characterization are novel.