Search results
1 – 2 of 2Abstract
Purpose
We use the extended finite element method (XFEM) to model the whole process of initiation and propagation of cracks in the inner dense pyrolytic carbon (IPyC) layer of tri-structural isotropic (TRISO) particle induced by the microdefect in an irradiation-induced thermomechanical coupling environment and study the effect of microdefect sizes on the propagation path.
Design/methodology/approach
The irradiation-induced thermal–mechanical coupling analysis is first conducted for the representative volume element (RVE) of the TRISO particle by using the conventional finite element method (CFEM) so that the stress distribution is obtained. The stress results are then restored for the enriched elements, and the simulation of crack initiation and propagation is eventually carried out by using the XFEM.
Findings
1. As a crack initiates in the IPyC layer, it will terminate at the free edge of the RVE TRISO particle in the end. 2. The size of the microdefect has a significant impact on the propagation path.
Originality/value
The ceramic dispersion microencapsulated (CDM) fuel is a good accident-resistant fuel whose safe operation is crucial to the safety and reliability of the whole nuclear reactor. It is of great scientific significance and practical value to study the irradiation-induced thermomechanical coupling stress distribution and cracking behavior in the IPyC layer of TRISO particles for the CDM fuel. Crack initiation and propagation analysis is challengeable for this complex multi-layer structure. This can help understand the failure mechanism of TRISO particles and evaluate the operation safety of the reactor.
Details
Keywords
A. Gholami, S. F. Hosseini, Kamel Milani Shirvan, Sadiq M. Sait and R. Ellahi
Due to the abundant use of granular materials in chemical industries, it is inevitable to store raw materials and products in bulk in silos. For this reason, much research has…
Abstract
Purpose
Due to the abundant use of granular materials in chemical industries, it is inevitable to store raw materials and products in bulk in silos. For this reason, much research has been carried out in the field of construction, operation and maintenance of silos. One of the important issues that must be investigated in silos is the behavior of their structure when the materials inside them are unloaded. Structural vibrations and the creation of normal noise usually discharge the granular of material from the silo. Both of phenomena are undesirable due to the problems they can cause to the structure and its surroundings. According to the said issues, this paper aims to investigate the vibration problem of the sulfur storage silo of the first refinery during discharge with the help of measuring experimental vibration data and simulating the silo model.
Design/methodology/approach
In the experimental investigation, the main cause of the vibration of the 400-ton silo in the refinery is used. The mass asymmetry phenomenon when the silo is filled is also considered. The experimental results are authenticated by software analysis too.
Findings
The results showed that the natural frequency of the ninth mode is almost equal to the natural frequency of sulfur discharge from the silos and has the largest shape change in the structure and vibration range. It is also concluded that the larger sulfur silo (400 tons) should be prioritized over the smaller sulfur silo (200 tons) in the emptying program, and the 400 tons silo should never be emptied even through the 200 tons silo is empty.
Originality/value
An attempt is made to investigate the issue of vibration in sulfur storage silos in the first refinery of South Pars in the form of experimental investigation and modal analysis.
Details