Search results

This paper aims to analyze the propulsive performance of small-amplitude pitching foils at very high frequencies with double objectives: to find out scaling laws for the time-averaged thrust and propulsive efficiency at very high frequencies; and to characterize the Strouhal number above which the effect of turbulence on the mean values cannot be neglected.

The thrust force and propulsive efficiency of a pitching NACA0012 foil at high reduced frequencies (k) and a Reynolds number Re = 16 000 are analyzed using accurate numerical simulations, both assuming laminar flow and using a transition turbulence model. The time-averaged results are validated with available experimental data for k up to about 12 (Strouhal number, St, up to 0.6). This study also compares the present numerical results with the predictions of theoretical models and existing numerical results. For a foil pitching about its quarter chord with amplitude α₀ = 8^o, the reduced frequency is varied here up to k = 30 (St up to 2), much higher than in any previous numerical or experimental work.

For this pitch amplitude, turbulence effects are found negligible for St ≲ 0.8, and affecting less than 10% to the time-averaged thrust coefficient CT¯ for larger St Linear potential theory fails for very large k, even for the small pitch amplitude considered, particularly for the power coefficient, and therefore for the propulsive efficiency. It is found that CT¯ ∼ St² for large St, in agreement with recent models, and the propulsive efficiency decays as 1/k, in disagreement with the linear potential theory.

Pitching foils are increasingly studied as efficient propellers and energy harvesting devices. Their performance at very high reduced frequencies has not been sufficiently analyzed before. The authors provide accurate numerical simulations to discern when turbulence is relevant for the computation of the time-averaged thrust and efficiency and how their scaling with the reduced frequency is affected in relation to the laminar-flow predictions. This is relevant because some small-amplitude theoretical models predict high propulsive efficiency of pitching foils at very high frequencies over certain ranges of the structural parameters, and only very accurate numerical simulations may decide on these predictions.

The “chiralisation” of Euclidean polygonal tessellations is a novel, recent method which has been used to design new auxetic metamaterials with complex topologies and improved geometric versatility over traditional chiral honeycombs. This paper aims to design and manufacture chiral honeycombs representative of four distinct classes of 2D Euclidean tessellations with hexagonal rotational symmetry using fused-deposition additive manufacturing and experimentally analysed the mechanical properties and failure modes of these metamaterials.

Finite Element simulations were also used to study the high-strain compressive performance of these systems under both periodic boundary conditions and realistic, finite conditions. Experimental uniaxial compressive loading tests were applied to additively manufactured prototypes and digital image correlation was used to measure the Poisson’s ratio and analyse the deformation behaviour of these systems.

The results obtained demonstrate that these systems have the ability to exhibit a wide range of Poisson’s ratios (positive, quasi-zero and negative values) and stiffnesses as well as unusual failure modes characterised by a sequential layer-by-layer collapse of specific, non-adjacent ligaments. These findings provide useful insights on the mechanical properties and deformation behaviours of this new class of metamaterials and indicate that these chiral honeycombs could potentially possess anomalous characteristics which are not commonly found in traditional chiral metamaterials based on regular monohedral tilings.

To the best of the authors’ knowledge, the authors have analysed for the first time the high strain behaviour and failure modes of chiral metamaterials based on Euclidean multi-polygonal tessellations.

The purpose of this study is to develop and describe a process which can be applied to develop new methods in the context of preliminary aircraft sizing in a successful and efficient way.

The tasks to development new aircraft sizing methods are systematically analyzed. In particular, repeating and nonrepeating tasks and common or unique tasks. Then ordered in a sequence and described generically.

A development process for new aircraft design methods which are necessary for new technologies or configurations is introduced and explained step by step.

Introducing the capability to deal with new technologies or configurations, aircraft design tools or aircraft concepts requires new sizing methods.

The paper presents a systematic approach which can be used to develop a great amount of new sizing methods with a comparable usability and quality standard in an efficient and effective way.

The purpose of this paper is to analyze and compare the performances of novel roadable personal air vehicle (PAV) concepts that meet established operational requirements with different types of engines.

The vehicle configuration was devised considering the dimensions and operational restrictions of the roads, runways and parking lots in South Korea. A folding wing design was adopted for road operations and parking. The propulsion designs considered herein use gasoline, diesel and hybrid architectures for longer-range missions. The sizing point of the roadable PAV that minimizes the wing area was selected, and the rate of climb, ground roll distance, cruise speed and service ceiling requirements were met. For various engine types and mission profiles, the performances of differently sized PAVs were compared with respect to the MTOW, wing area, wing span, thrust-to-weight ratio, wing loading, power-to-weight ratio, brake horsepower and fuel efficiency.

Unlike automobiles, the weight penalty of the hybrid system because of the additional electrical components reduced the fuel efficiency considerably. When the four engine types were compared, matching the total engine system weight, the internal combustion (IC) engine PAVs had better fuel efficiency rates than the hybrid powered PAVs. Finally, a gasoline-powered PAV configuration was selected as the final design because it had the lowest MTOW, despite its slightly worse fuel efficiency compared to that of the diesel-powered engine.

Although an electric aircraft powered only by batteries most capitalizes on the operating cost, noise and emissions benefits of electric propulsion, it also is most hampered by range limitations. Air traffic integration or any safety, and noise issues were not accounted in this study.

Aircraft sizing is a critical aspect of a system-level study because it is a prerequisite for most design and analysis activities, including those related to the internal layout as well as cost and system effectiveness analyses. The results of this study can be implemented to design a PAV.

This study can contribute to the establishment of innovative PAV concepts that can alleviate today’s transportation problems.

This study compared the sizing results of PAVs with hybrid engines with those having IC engines.

Tandem wing aircrafts belong to an unconventional configurations group, and this type of design is characterised by a strong aerodynamic coupling, which results in lower induced drag. The purpose of this paper is to determine whether a certain trend in the wingspan impact on aircraft dynamic stability can be identified. The secondary goal was to compare the response to control of flaps placed on a front and rear wing.

The aerodynamic data and control derivatives were obtained from the computational fluid dynamics computations performed by the MGAERO software. The equations of aircraft longitudinal motion in a state space form were used. The equations were built based on the aerodynamic coefficients, stability and control derivatives. The analysis of the dynamic stability was done in the MATLAB by solving the eigenvalue problem. The response to control was computed by the step response method using MATLAB.

The results of this study showed that because of a strong aerodynamic coupling, a nonlinear relation between the wing size and aircraft dynamic stability proprieties was observed. In the case of the flap deflection, stronger oscillation was observed for the front flap.

Results of dynamic stability of aircraft in the tandem wing configuration can be found in the literature, but those studies show outcomes of a single configuration, while this paper presents a comprehensive investigation into the impact of wingspan on aircraft dynamic stability. The results reveal that because of a strong aerodynamic coupling, the relation between the span factor and dynamic stability is nonlinear. Also, it has been demonstrated that the configuration of two wings with the same span is not the optimal one from the aerodynamic point of view.