Search results

Automatic dependent surveillance-broadcast (ADS-B) is the foundational technology of the next generation air transportation system defined by Federal Aviation Authority and is one of the most precise ways for tracking aircraft position. ADS-B is intended to provide greater situational awareness to the pilots by displaying the traffic information like aircraft ID, altitude, speed and other critical parameters on the Cockpit Display of Traffic Information displays in the cockpit. Unfortunately, due to the initial proposed nature of ADS-B protocol, it is neither encrypted nor has any other innate security mechanisms, which makes it an easy target for malicious attacks. The system is vulnerable to various active and passive attacks like message ingestion, message deletion, eavesdropping, jamming, etc., which has become an area of concern for the aviation industry. The purpose of this study is to propose a method based on modified advanced encryption standard (AES) algorithm to secure the ADS=B messages and increase the integrity of ADS-B data transmissions.

Though there are various cryptographic and non-cryptographic methods proposed to secure ADS-B data transmissions, it is evident that most of these systems have limitations in terms of cost, implementation or feasibility. The new proposed method implements AES encryption techniques on the ADS-B data on the sender side and correlated decryption mechanism at the receiver end. The system is designed based on the flight schedule data available from any flight planning systems and implementing the AES algorithm on the ADS-B data from each aircraft in the flight schedule.

The suitable hardware was developed using Raspberry pi, ESP32 and Ra-02. Several runs were done to verify the original message, transmitted data and received data. During transmission, encryption algorithm was being developed, which has got very high secured transmission, and during the reception, the data was secured. Field test was conducted to validate the transmission and quality. Several trials were done to validate the transmission process. The authors have successfully shown that the ADS-B data can be encrypted using AES algorithm. The authors are successful in transmitting and receiving the ADS-B data packet using the discussed hardware and software methodology. One major advantage of using the proposed solution is that the information received is encrypted, and the receiver ADS-B system can decrypt the messages on the receiving end. This clearly proves that when the data is received by an unknown receiver, the messages cannot be decrypted, as the receiver is not capable of decrypting the AES-authenticated messages transmitted by the authenticated source. Also, AES encryption is highly unlikely to be decrypted if the encryption key and the associated decryption key are not known.

Implementation of the developed solution in actual onboard avionics systems is not within the scope of this research. Hence, assessing in the real-time distances is not covered.

The authors propose to extend this as a software solution to the onboard avionics systems by considering the required architectural changes. This solution can also bring in positive results for unmanned air vehicles in addition to the commercial aircrafts. Enhancement of security to the key operational and navigation data elements is going to be invaluable for future air traffic management and saving lives of people.

The proposed solution has been practically implemented by developing the hardware and software as part of this research. This has been clearly brought out in the paper. The implementation has been tested using the actual ADS-B data/messages received from using the ADS-B receiver. The solution works perfectly, and this brings immense value to the aircraft-to-aircraft and aircraft-to-ground communications, specifically while using ADS-B data for communicating the position information. With the proposed architecture and minor software updates to the onboard avionics, this solution can enhance safety of flights.

Theadvanced air mobility (AAM) is defined by National Aeronautics and Space Administration (NASA) as safe, accessible, automated and affordable air transportation system for passengers and cargo, capable of serving previously hard-to-reach urban and rural sites. The purpose of this paper is to focus on explaining potential solutions, under study by the authors, which could support beyond visual line of sight (BVLOS) operations for goods delivery in a safe way.

According to recent NASA-commissioned market studies, by 2030, there will be as many as 500 million flights a year for package delivery services and 750 million flights a year for passengers’ transportation (AAM). A significant number of these aircrafts will be unmanned aerial vehicles, meaning that they are self-flying or autonomous, of which the smallest ones are quadcopters: they are relatively inexpensive and are capable to perform various tasks, such as aerial observation, crop monitoring and treatment, search and rescue, power line monitoring and goods delivery. On the other hand, there are still many difficulties in introducing them into medium- and low-risk BVLOS routine operations for goods delivery: unfortunately, there are no regulations and technologies yet that enable these operations.

This conceptual paper outlines the studies about possible solutions, identified by authors, which could support BVLOS operations in a medium- and low-risk environment; in particular, the following aspects have been analysed: regulations, integrating control systems for drones, sensors (on board obstacle detection and avoidance), emergency management (emergency on ground system to identify safe landing areas), concepts of droneway (or flight corridors) and drones recovery hub.

The purpose of this paper is to provide a conceptual description of the possible solutions, under study by the authors, which could contribute enabling the BVLOS operations in a medium- and low-risk environment. The paper aims describing the state of the art, terms of regulations, classifications and limitations and describing possible conceptual solutions that could guarantee safety in introducing unmanned aircraft system operations inside urban areas.

Reducing aircraft fuel consumption has become a paramount research area, focusing on optimizing operational parameters like speed and altitude during the cruise phase. However, the existing methods for fuel reduction often rely on complex experimental calculations and data extraction from embedded systems, making practical implementation challenging. To address this, this study aims to devise a simple and accessible approach using available information.

In this paper, a novel analytic method to estimate and optimize fuel consumption for aircraft equipped with jet engines is proposed, with a particular emphasis on speed and altitude parameters. The dynamic variations in weight caused by fuel consumption during flight are also accounted for. The derived fuel consumption equation was rigorously validated by applying it to the Boeing 737–700 and comparing the results against the fuel consumption reference tables provided in the Boeing manual. Remarkably, the equation yielded closely aligned outcomes across various altitudes studied. In the second part of this paper, a pioneering approach is introduced by leveraging the particle swarm optimization algorithm (PSO). This novel application of PSO allows us to explore the equation’s potential in finding the optimal altitude and speed for an actual flight from Algiers to Brussels.

The results demonstrate that using the main findings of this study, including the innovative equation and the application of PSO, significantly simplifies and expedites the process of determining the ideal parameters, showcasing the practical applicability of the approach.

The suggested methodology stands out for its simplicity and practicality, particularly when compared to alternative approaches, owing to the ready availability of data for utilization. Nevertheless, its applicability is limited in scenarios where zero wind effects are a prevailing factor.

The research opens up new possibilities for fuel-efficient aviation, with a particular focus on the development of a unique fuel consumption equation and the pioneering use of the PSO algorithm for optimizing flight parameters. This study’s accessible approach can pave the way for more environmentally conscious and economical flight operations.

Digital transformation has created an important framework for the commercial aviation industry. Aviation companies that develop a digital strategy or implement the strategies successfully are seeing improvements in their overall efficiency, cost, flexibility and security performances with the effect of digitalization. For aviation businesses, digitalization is seen as one of the important conditions of competition. For this reason, many aviation businesses prioritize digital investments and make the major strategic moves necessary to gain a competitive advantage. However, the digitization of aviation businesses cannot be achieved by investing in technology alone. Digital arguments need to be aligned with customer expectations and the goals of the business. The increase in the number of airline companies has caused airline companies to create new strategies that will increase cost efficiency. IATA (International Air Transport Association), which is a member of airline companies and works for the efficiency of commercial air transportation revealed its vision of a ‘Digital Airline’, which represents what an airline can look like in 2025. Digitalization and efficiency, reflections on human resources, digital applications of airlines, benefits of airline companies from digital transformation, airline mobile applications, online check-in and boarding services (self-check-in, kiosk), online travel assistant, digital baggage cards (RFID – radio frequency identification), digital cabin management systems, in-flight entertainment systems, cabin cleaning robots, digital loyalty programmes, a new perspective in aviation education, interactive virtual reality environments, big data technology and applications and disadvantages of digital transformation are evaluated in the chapter.

The Internet of Things (IoT), as one of the new digital technologies, has created wide applications in various industries, and one of the most influential industries of this technology is the transportation industry. By integrating the IoT with the transportation industry, there will be dramatic changes in the industry, and it will provide many entrepreneurial opportunities for entrepreneurs to develop new businesses. Opportunity identification is at the heart of the entrepreneurial process, and entrepreneurs identify innovative goods or services to enter a new market by identifying, evaluating, and exploiting opportunities. Despite the desire of transportation managers to invest in the IoT and the increase in research in this area, limited research has focused on IoT-based entrepreneurial opportunities in the transportation industry. Therefore, the present study aims to identify IoT-based entrepreneurial opportunities in the transportation industry and examine their importance.

To achieve the research objective, the authors applied a mixed approach. First, adapting the lens of the industry value chain theory, a comprehensive literature review, besides a qualitative approach including semi-structured interviews with experts and thematic analysis, was conducted to identify the entrepreneurial opportunities. The identified opportunities were confirmed in the second stage using a quantitative survey method, including the Student t-test and factor analysis. Finally, the identified opportunities were weighted and ranked using the best worst method (BWM).

Entrepreneurial opportunities are classified into five main categories, including “smart vehicles”, “business partners/smart transportation supply side”, “supporting services”, “infrastructures”, and “smart transport management and control”. The infrastructures group of opportunities ranked the highest amongst the identified groups.

This study adds to the digital entrepreneurship opportunity recognition literature by addressing opportunities in a smart industry propelled by digital technologies, including developing new products or new applications of the available technologies. Additionally, inspired by the industry value chain theory, this article develops a framework including various digital entrepreneurial opportunity networks which are necessary to add value to any industry and, thus, could be applied by entrepreneurs to recognize opportunities for new intermediaries to enter other digital-based industries. Finally, the present study identifies the IoT-based entrepreneurial opportunities in the smart transportation industry and prioritizes them, providing practical insights regarding the creation of entrepreneurial ecosystems in the field of smart transportation for entrepreneurs and policymakers.

This paper presents a survey of research into interactive robotic systems for the purpose of identifying the state of the art capabilities as well as the extant gaps in this emerging field. Communication is multimodal. Multimodality is a representation of many modes chosen from rhetorical aspects for its communication potentials. The author seeks to define the available automation capabilities in communication using multimodalities that will support a proposed Interactive Robot System (IRS) as an AI mounted robotic platform to advance the speed and quality of military operational and tactical decision making.

This review will begin by presenting key developments in the robotic interaction field with the objective of identifying essential technological developments that set conditions for robotic platforms to function autonomously. After surveying the key aspects in Human Robot Interaction (HRI), Unmanned Autonomous System (UAS), visualization, Virtual Environment (VE) and prediction, the paper then proceeds to describe the gaps in the application areas that will require extension and integration to enable the prototyping of the IRS. A brief examination of other work in HRI-related fields concludes with a recapitulation of the IRS challenge that will set conditions for future success.

Using insights from a balanced cross section of sources from the government, academic, and commercial entities that contribute to HRI a multimodal IRS in military communication is introduced. Multimodal IRS (MIRS) in military communication has yet to be deployed.

Multimodal robotic interface for the MIRS is an interdisciplinary endeavour. This is not realistic that one can comprehend all expert and related knowledge and skills to design and develop such multimodal interactive robotic interface. In this brief preliminary survey, the author has discussed extant AI, robotics, NLP, CV, VDM, and VE applications that is directly related to multimodal interaction. Each mode of this multimodal communication is an active research area. Multimodal human/military robot communication is the ultimate goal of this research.

A multimodal autonomous robot in military communication using speech, images, gestures, VST and VE has yet to be deployed. Autonomous multimodal communication is expected to open wider possibilities for all armed forces. Given the density of the land domain, the army is in a position to exploit the opportunities for human–machine teaming (HMT) exposure. Naval and air forces will adopt platform specific suites for specially selected operators to integrate with and leverage this emerging technology. The possession of a flexible communications means that readily adapts to virtual training will enhance planning and mission rehearsals tremendously.

Interaction, perception, cognition and visualization based multimodal communication system is yet missing. Options to communicate, express and convey information in HMT setting with multiple options, suggestions and recommendations will certainly enhance military communication, strength, engagement, security, cognition, perception as well as the ability to act confidently for a successful mission.

The objective is to develop a multimodal autonomous interactive robot for military communications. This survey reports the state of the art, what exists and what is missing, what can be done and possibilities of extension that support the military in maintaining effective communication using multimodalities. There are some separate ongoing progresses, such as in machine-enabled speech, image recognition, tracking, visualizations for situational awareness, and virtual environments. At this time, there is no integrated approach for multimodal human robot interaction that proposes a flexible and agile communication. The report briefly introduces the research proposal about multimodal interactive robot in military communication.

This study presents a systematic literature review (SLR) of the interdisciplinary literature on drones in last-mile delivery (LMD) to extrapolate pertinent insights from and into the logistics management field.

Rooting their analytical categories in the LMD literature, the authors performed a deductive, theory refinement SLR on 307 interdisciplinary journal articles published during 2015–2022 to integrate this emergent phenomenon into the field.

The authors derived the potentials, challenges and solutions of drone deliveries in relation to 12 LMD criteria dispersed across four stakeholder groups: senders, receivers, regulators and societies. Relationships between these criteria were also identified.

This review contributes to logistics management by offering a current, nuanced and multifaceted discussion of drones' potential to improve the LMD process together with the challenges and solutions involved.

The authors provide logistics managers with a holistic roadmap to help them make informed decisions about adopting drones in their delivery systems. Regulators and society members also gain insights into the prospects, requirements and repercussions of drone deliveries.

This is one of the first SLRs on drone applications in LMD from a logistics management perspective.

Globalization, along with its technological developments, has brought important changes and developments in all sectors and led to innovation and modernization. In the tourism industry, the concept of smart destination, derived from the concept of smart city, has become widespread to meet the changing needs of tourists. In this context, smart technologies have started to be used in destinations, but more than technology in destinations is needed in terms of sustainability. To ensure sustainability in tourism, these smart technologies must also be eco-friendly. Smart destinations and eco-friendly practices are important for the sustainable development of the tourism industry. The use of technology in destinations can increase sustainability and efficiency, while using eco-friendly practices can protect and preserve the natural environment. In this study, first of all, smart destinations and the characteristics of smart destinations are discussed. Then, smart tourism and related eco-friendly practices are argued. Following this, information about the future of smart destinations is given, and assumptions are mentioned. Afterward, problems and solutions are discussed. Finally, the study has been completed with the conclusion part. The findings of the study revealed that the concept of green especially comes to the fore in smart destinations, that there are studies to prevent all kinds of pollution (air, noise, etc.), and applications such as smart parking systems, smart lighting systems, augmented reality (AR), and virtual reality (VR) are given importance.

Organisations and industries are often looking for technologies that can accomplish multiple tasks, providing economic benefits and an edge over their competitors. In this context, drones have the potential to change many industries by making operations more efficient, safer and more economic. Therefore, this study investigates the use of drones as the next step in smart/digital warehouse management to determine their socio-economic benefits.

The study identifies various enablers impacting drone applications to improve inventory management, intra-logistics, inspections and surveillance in smart warehouses through a literature review, a test of concordance and the fuzzy Delphi method. Further, the graph theory matrix approach (GTMA) method was applied to ranking the enablers of drone application in smart/digital warehouses. In the subsequent phase, researchers investigated the relation between the drone application's performance and the enablers of drone adoption using logistic regression analysis under the TOE framework.

This study identifies inventory man agement, intra-logistics, inspections and surveillance are three major applications of drones in the smart warehousing. Further, nine enablers are identified for the adoption of drone in warehouse management. The findings suggest that operational effectiveness, compatibility of drone integration and quality/value offered are the most impactful enablers of drone adoption in warehouses. The logistic regression findings are useful for warehouse managers who are planning to adopt drones in a warehouse for efficient operations.

This study identifies the enablers of drone adoption in the smart and digital warehouse through the literature review and fuzzy Delphi. Therefore, some enablers may be overlooked during the identification process. In addition to this, the analysis is based on the opinion of the expert which might be influenced by their field of expertise.

By considering technology-organisation-environment (TOE) framework warehousing companies identify the opportunities and challenges associated with using drones in a smart warehouse and develop strategies to integrate drones into their operations effectively.

This study proposes a TOE-based framework for the adoption of drones in warehouse management to improve the three prominent warehouse functions inventory management, intra-logistics, inspections and surveillance using the mixed-method.

This study aimed to develop an adapted collaborative governance model for aviation human resource development in Indonesia's approved training organisations (ATO), considering the expected changes in the industry due to advanced technologies. The model, based on Ansell and Gash's approach, emphasizes multi-stakeholder collaboration to ensure workforce development aligns with industry and regulatory standards and accommodates technological advancements.

Qualitative methods, such as in-depth interviews and focus group discussions, were employed to collect and analyse data.

The results indicated that collaborative governance is a valuable tool for cultivating competent human resources and facilitating industry improvement in the face of rapid technological change.

The proposed model contributes significantly to the field by promoting inclusive and effective human resource development through the Centre for Aviation Human Resource Development (CAHRD), thereby preparing the Indonesian aviation industry for the impact of advanced technologies. Furthermore, this study contributes to the enhancement of Ansell and Gash's collaborative governance theoretical framework by effectively addressing its empirical gaps concerning vocational education and training challenges within Indonesia's air transportation sector.