Search results

This study aims to validate the linear flow theory with computational fluid dynamics (CFD) simulations and to propose a novel shape for the airfoil that will improve supersonic aerodynamic performance compared to the National Advisory Committee for Aeronautics (NACA) 64a210 airfoil.

To design the new airfoil shape, this study uses a convex optimization approach to obtain a global optimal shape for an airfoil. First, modeling is conducted using linear flow theory, and then numerical verification is done by CFD simulations using ANSYS Fluent. The optimization process ensures that the new airfoil maintains the same cross-sectional area and thickness as the NACA 64a210 airfoil. This study found that an efficient way to obtain the ideal airfoil shape is by using linear flow theory, and the numerical simulations supported the assumptions inherent in the linear flow theory.

This study’s findings show notable improvements (from 4% to 200%) in the aerodynamic performance of the airfoil, especially in the supersonic range, which points to the suggested airfoil as a potential option for several fighter aircraft. Under various supersonic conditions, the optimized airfoil exhibits improved lift-over-drag ratios, leading to improved flight performance and lower fuel consumption.

This study was conducted mainly for supersonic flow, whereas the subsonic flow is tested for a Mach number of 0.7. This study would be extended for both subsonic and supersonic flights.

Convex optimization and linear flow theory are combined in this work to create an airfoil that performs better in supersonic conditions than the NACA 64a210. By closely matching the CFD results, the linear flow theory's robustness is confirmed. This means that the initial design phase no longer requires extensive CFD simulations, and the linear flow theory can be used quickly and efficiently to obtain optimal airfoil shapes.

The proposed airfoil can be used in different fighter aircraft to enhance performance and reduce fuel consumption. Thus, lower carbon emission is expected.

The unique aspect of this work is how convex optimization and linear flow theory were combined to create an airfoil that performs better in supersonic conditions than the NACA 64a210. Comprehensive CFD simulations were used for validation, highlighting the optimization approach's strength and usefulness in aerospace engineering.

Aerodynamic shape optimisation is a complex problem usually governed by transonic non-linear aerodynamics, a high dimensional design space and high computational cost. Consequently, the use of a numerical simulation approach can become prohibitive for some applications. This paper aims to propose a computationally efficient multi-fidelity method for the optimisation of two-dimensional axisymmetric aero-engine nacelles.

The nacelle optimisation approach combines a gradient-free algorithm with a multi-fidelity surrogate model. Machine learning based on artificial neural networks (ANN) is used as the modelling technique because of its ability to handle non-linear behaviour. The multi-fidelity method combines Reynolds-averaged Navier Stokes and Euler CFD calculations as high- and low-fidelity, respectively.

Ratios of low- and high-fidelity training samples to degrees of freedom of n_LF/n_DOFs = 50 and n_HF/n_DOFs = 12.5 provided a surrogate model with a root mean squared error less than 5% and a similar convergence to the optimal design space when compared with the equivalent CFD-in-the-loop optimisation. Similar nacelle geometries and aerodynamic flow topologies were obtained for down-selected designs with a reduction of 92% in the computational cost. This highlights the potential benefits of this multi-fidelity approach for aerodynamic optimisation within a preliminary design stage.

The application of a multi-fidelity technique based on ANN to the aerodynamic shape optimisation problem of isolated nacelles is the key novelty of this work. The multi-fidelity aspect of the method advances current practices based on single-fidelity surrogate models and offers further reductions in computational cost to meet industrial design timescales. Additionally, guidelines in terms of low- and high-fidelity sample sizes relative to the number of design variables have been established.

This paper delves into the aerodynamic optimization of a single-stage axial turbine employed in aero-engines.

An efficient integrated design optimization approach tailored for turbine blade profiles is proposed. The approach combines a novel hierarchical dynamic switching PSO (HDSPSO) algorithm with a parametric modeling technique of turbine blades and high-fidelity Computational Fluid Dynamics (CFD) simulation analysis. The proposed HDSPSO algorithm introduces significant enhancements to the original PSO in three pivotal aspects: adaptive acceleration coefficients, distance-based dynamic neighborhood, and a switchable learning mechanism. The core idea behind these improvements is to incorporate the evolutionary state, strengthen interactions within the swarm, enrich update strategies for particles, and effectively prevent premature convergence while enhancing global search capability.

Mathematical experiments are conducted to compare the performance of HDSPSO with three other representative PSO variants. The results demonstrate that HDSPSO is a competitive intelligent algorithm with significant global search capabilities and rapid convergence speed. Subsequently, the HDSPSO-based integrated design optimization approach is applied to optimize the turbine blade profiles. The optimized turbine blades have a more uniform thickness distribution, an enhanced loading distribution, and a better flow condition. Importantly, these optimizations lead to a remarkable improvement in aerodynamic performance under both design and non-design working conditions.

These findings highlight the effectiveness and advancement of the HDSPSO-based integrated design optimization approach for turbine blade profiles in enhancing the overall aerodynamic performance. Furthermore, it confirms the great prospects of the innovative HDSPSO algorithm in tackling challenging tasks in practical engineering applications.

The purpose of this study is to re-evaluation fuselage design when the main wing’s has the ability to fulfill stability requirements without the need for a tailplane. The aerodynamic requirements of the fuselage usually involve a trade-off between reducing drag and providing enough length for positioning the empennage to ensure stability. However, if the main wing can fulfill the stability requirements without the need for a tailplane, then the fuselage design requirements can be re-evaluated. The optimisation of the fuselage can then include reducing drag and also providing a component of lift amongst other potential new requirements.

A careful investigation of parameterisation and trade-off optimisation methods to create such fuselage shapes was performed. The A320 Neo aircraft is optimised using a parameterised 3D fuselage model constructed with a modified PARSEC method and the SHERPA optimisation strategy, which was validated through three case studies. The geometry adjustments in relation to the specific flow phenomena are considered for the three optimal designs to investigate the influencing factors that should be considered for further optimisation.

The top three aerodynamic designs show a distinctive characteristic in the low aspect ratio thick wing-like aftbody that has pressure drag penalties, and the aftbody camber increased surface area notably improved the fuselage’s lift characteristics.

This work contributes to the development of a novel set of design requirements for a fuselage, free from the constraints imposed by stability requirements. By gaining insights into the flow phenomena that influence geometric designs when a lift requirement is introduced to the fuselage, we can understand how the fuselage configuration was optimised. This research lays the groundwork for identifying innovative design criteria that could extend into the integration of propulsion of the aftbody.

The aerodynamic differences between the head car (HC) and tail car (TC) of a high-speed maglev train are significant, resulting in control difficulties and safety challenges in operation. The arch structure has a significant effect on the improvement of the aerodynamic lift of the HC and TC of the maglev train. Therefore, this study aims to investigate the effect of a streamlined arch structure on the aerodynamic performance of a 600 km/h maglev train.

Three typical streamlined arch structures for maglev trains are selected, i.e. single-arch, double-arch and triple-arch maglev trains. The vortex structure, pressure of train surface, boundary layer, slipstream and aerodynamic forces of the maglev trains with different arch structures are compared by adopting improved delayed detached eddy simulation numerical calculation method. The effects of the arch structures on the aerodynamic performance of the maglev train are analyzed.

The dynamic topological structure of the wake flow shows that a change in arch structure can reduce the vortex size in the wake region; the vortex size with double-arch and triple-arch maglev trains is reduced by 15.9% and 23%, respectively, compared with a single-arch maglev train. The peak slipstream decreases with an increase in arch structures; double-arch and triple-arch maglev trains reduce it by 8.89% and 16.67%, respectively, compared with a single-arch maglev train. The aerodynamic force indicates that arch structures improve the lift imbalance between the HC and TC of a maglev train; double-arch and triple-arch maglev trains improve it by 22.4% and 36.8%, respectively, compared to a single-arch maglev train.

This study compares the effects of a streamlined arch structure on a maglev train and its surrounding flow field. The results of the study provide data support for the design and safe operation of high-speed maglev trains.

The decrease in specific thrust achieved by Ultra-High Bypass Ratio (UHBPR) aero-engines allows for a reduction in specific fuel consumption. However, the typical associated larger fan size might increase the nacelle drag, weight and the detrimental interference effects with the airframe. Consequently, the benefits from the new UHBPR aero-engine cycle may be eroded. This paper aims to evaluate the potential improvement in the aerodynamic performance of compact nacelles for installed aero-engine configuration.

Drooped and scarfed non-axisymmetric compact and conventional nacelle designs were down selected from a multi-point CFD-based optimisation. These were computationally assessed at a set of installation positions on a contemporary wide-body, twin-engine transonic aircraft. Both cruise and off-design conditions were evaluated. A thrust and drag accounting method was applied to evaluate different aircraft, powerplant and nacelle performance metrics.

The aircraft with the compact nacelle configuration installed at a typical installation position provided a reduction in aircraft cruise fuel consumption of 0.44% relative to the conventional architecture. However, at the same installation position, the compact design exhibits a large flow separation at windmilling conditions that is translated into an overall aircraft drag penalty of approximately 5.6% of the standard cruise net thrust. Additionally, the interference effects of a compact nacelle are more sensitive to deviations in mass flow capture ratio (MFCR) from the nominal windmilling diversion condition.

This work provides a comprehensive analysis of not only the performance but also the aerodynamics at an aircraft level of compact nacelles compared to conventional configurations for a range of installations positions at cruise. Additionally, the engine-airframe integration aerodynamics is assessed at an off-design windmilling condition which constitutes a key novelty of this paper.

This paper aims to investigate the effect of different wing height layouts on the aerodynamic performance and flow structure of high-speed train, in a train-wing coupling method with multiple tandem wings installed on the train roof.

The improved delayed detached eddy simulation method based on shear stress transport k- ω turbulence model has been used to conduct computational fluid dynamics simulation on the train with three different wing height layouts, at a Reynolds number of 2.8 × 10⁶. The accuracy of the numerical method has been validated by wind tunnel experiments.

The wing height layout has a significant effect on the lift, while its influence on the drag is weak. There are three distinctive vortex structures in the flow field: wingtip vortex, train body vortex and pillar vortex, which are influenced by the variation in wing height layout. The incremental wing layout reduces the mixing and merging between vortexes in the flow field, weakening the vorticity and turbulence intensity. This enhances the pressure difference between the upper and lower surfaces of both the train and wings, thereby increasing the overall lift. Simultaneously, it reduces the slipstream velocity at platform and trackside heights.

This paper contributes to understanding the aerodynamic characteristics and flow structure of a high-speed train coupled with wings. It provides a reference for the design aiming to achieve equivalent weight reduction through aerodynamic lift synergy in trains.

This study aims to investigate the morphing concepts able to manipulate the dynamics of the downstream unsteadiness in the separated shear layers and, in the wake, be able to modify the upstream shock–boundary layer interaction (SBLI) around an A320 morphing prototype to control these instabilities, with emphasis to the attenuation or even suppression of the transonic buffet. The modification of the aerodynamic performances according to a large parametric study carried out at Reynolds number of 4.5 × 10⁶, Mach number of 0.78 and various angles of attack in the range of (0, 2.4)° according to two morphing concepts (travelling waves and trailing edge vibration) are discussed, and the final benefits in aerodynamic performance increase are evaluated.

This article examines through high fidelity (Hi-Fi) numerical simulation the effects of the trailing edge (TE) actuation and of travelling waves along a specific area of the suction side starting from practically the most downstream position of the shock wave motion according to the buffet and extending up to nearly the TE. The present paper studies through spectral analysis the coherent structures development in the near wake and the comparison of the aerodynamic forces to the non-actuated case. Thus, the physical mechanisms of the morphing leading to the increase of the lift-to-drag ratio and the drag and noise sources reduction are identified.

This study investigates the influence of shear-layer and near-wake vortices on the SBLI around an A320 aerofoil and attenuation of the related instabilities thanks to novel morphing: travelling waves generated along the suction side and trailing-edge vibration. A drag reduction of 14% and a lift-to-drag increase in the order of 8% are obtained. The morphing has shown a lift increase in the range of (1.8, 2.5)% for angle of attack of 1.8° and 2.4°, where a significant lift increase of 7.7% is obtained for the angle of incidence of 0° with a drag reduction of 3.66% yielding an aerodynamic efficiency of 11.8%.

This paper presents results of morphing A320 aerofoil, with a chord of 70cm and subjected to two actuation kinds, original in the state of the art at M = 0.78 and Re = 4.5 million. These Hi-Fi simulations are rather rare; a majority of existing ones concern smaller dimensions. This study showed for the first time a modified buffet mode, displaying periodic high-lift “plateaus” interspersed by shorter lift-decrease intervals. Through trailing-edge vibration, this pattern is modified towards a sinusoidal-like buffet, with a considerable amplitude decrease. Lock-in of buffet frequency to the actuation is obtained, leading to this amplitude reduction and a drastic aerodynamic performance increase.

Express freight transportation is in rapid development currently. Owing to the higher speed of express freight train, the deformation of the bridge deck worsens the railway line condition under the action of wind and train moving load when the train runs over a long-span bridge. Besides, the blunt car body of vehicle has poor aerodynamic characteristics, bringing a greater challenge on the running stability in the crosswind.

In this study, the aerodynamic force coefficients of express freight vehicles on the bridge are measured by scale model wind tunnel test. The dynamic model of the train-long-span steel truss bridge coupling system is established, and the dynamic response as well as the running safety of vehicle are evaluated.

The results show that wind speed has a significant influence on running safety, which is mainly reflected in the over-limitation of wheel unloading rate. The wind speed limit decreases with train speed, and it reduces to 18.83 m/s when the train speed is 160 km/h.

This study deepens the theoretical understanding of the interaction between vehicles and bridges and proposes new methods for analyzing similar engineering problems. It also provides a new theoretical basis for the safety assessment of express freight trains.

With the advancements in electric vertical take-off and landing (eVTOL) aircraft technology such as batteries, mechanisms, motors, configurations and so on, designers and engineers are encouraged to create unique and unconventional configurations of eVTOL aircraft to provide better capabilities and higher efficiencies to compete in the market. The box fan-in-split-wing tiltrotor eVTOL aircraft is an innovative design that aims to address the aerodynamic inefficiencies such as propeller effects in cruise and engine mounts drag that existed in traditional eVTOL aircraft designs such as vectored thrust, rotorcraft, lift + cruise and multi-copter configurations. This paper aims to propose a multi-disciplinary design process to conceptually design the box fan-in-split-wing Tiltrotor eVTOL aircraft.

An unconventional methodology was used to design the UAM aircraft, and the following parameters are considered: capable of vertical take-off and landing, highly aerodynamic with a high lift-to-drag ratio, low Cd₀ modern and appealing, rechargeable or battery swappable and feature to minimise or negate propeller drag. A heavy emphasis on improving performance and weight based on aerodynamics was enforced during the conceptual design phase. MAPLA and XFOIL were used to identify the aerodynamic properties of the aircraft.

Upon determining the key parameters and the mission requirements and objectives, a list of possible VTOL configurations was derived from theoretical and existing designs. The fan in the wing/split wing was selected, as it could stow the propellers. A tiltrotor configuration was selected because of its ability to reduce the total number of lift props/motors, reducing powerplant weight and improving aerodynamic efficiency. For the propulsion configuration, a battery–motor configuration with a hexa-rotor layout was chosen because of its ability to complement the planform of the aircraft, providing redundant motors in case of failure and because of its reliability, efficiency and lack of emissions. Coupled with the fan-in-wing / split wing concept, the box wing seamlessly combines all chosen configurations.

The box fan-in-split-wing Tiltrotor eVTOL aircraft aims to address the aerodynamic inefficiencies of earlier designs such as propeller effects in cruise and engine mounts drag. The potential benefits of this aircraft, such as increased range, endurance and payload capacity, make it an exciting prospect in the field of Urban Air Mobility.