Search results

While the main purpose of reporting – e.g. reporting for taxes – is to gauge the economic state of a company, the fact that reporting is done at pre-determined dates distorts the reporting results. For example, to create a larger impression of their productivity, companies fire temporary workers before the reporting date and re-hire then right away. The purpose of this study is to decide how to avoid such distortion.

This study aims to come up with a solution which is applicable for all possible reasonable optimality criteria. Thus, a general formalism for describing and analyzing all such criteria is used.

This study shows that most distortion problems will disappear if the fixed pre-determined reporting dates are replaced with individualized random reporting dates. This study also shows that for all reasonable optimality criteria, the optimal way to assign reporting dates is to do it uniformly.

This study shows that for all reasonable optimality criteria, the optimal way to assign reporting dates is to do it uniformly.

It is found that the individualized random tax reporting dates would be beneficial for economy.

It is found that the individualized random tax reporting dates would be beneficial for society as a whole.

This study proposes a new idea of replacing the fixed pre-determining reporting dates with randomized ones. On the informal level, this idea may have been proposed earlier, but what is completely new is our analysis of which randomization of reporting dates is the best for economy: it turns out that under all reasonable optimality criteria, uniform randomization works the best.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

Testing business processes is crucial to assess the compliance of business process models with requirements. Automating this task optimizes testing efforts and reduces human error while also providing improvement insights for the business process modeling activity. The primary purposes of this paper are to conduct a literature review of Business Process Model and Notation (BPMN) testing and formal verification and to propose the Business Process Evaluation and Research Framework for Enhancement and Continuous Testing (bPERFECT) framework, which aims to guide business process testing (BPT) research and implementation. Secondary objectives include (1) eliciting the existing types of testing, (2) evaluating their impact on efficiency and (3) assessing the formal verification techniques that complement testing.

The methodology used is based on Kitchenham's (2004) original procedures for conducting systematic literature reviews.

Results of this study indicate that three distinct business process model testing types can be found in the literature: black/gray-box, regression and integration. Testing and verification approaches differ in aspects such as awareness of test data, coverage criteria and auxiliary representations used. However, most solutions pose notable hindrances, such as BPMN element limitations, that lead to limited practicality.

The databases selected in the review protocol may have excluded relevant studies on this topic. More databases and gray literature could also be considered for inclusion in this review.

Three main originality aspects are identified in this study as follows: (1) the classification of process model testing types, (2) the future trends foreseen for BPMN model testing and verification and (3) the bPERFECT framework for testing business processes.

This paper aims to propose a simulation-based performance evaluation model for the drone-based delivery of aid items to disaster-affected areas. The objective of the model is to perform analytical studies, evaluate the performance of drone delivery systems for humanitarian logistics and can support the decision-making on the operational design of the system – on where to locate drone take-off points and on assignment and scheduling of delivery tasks to drones.

This simulation model captures the dynamics and variabilities of the drone-based delivery system, including demand rates, location of demand points, time-dependent parameters and possible failures of drones’ operations. An optimization model integrated with the simulation system can update the optimality of drones’ schedules and delivery assignments.

An extensive set of experiments was performed to evaluate alternative strategies to demonstrate the effectiveness for the proposed optimization/simulation system. In the first set of experiments, the authors use the simulation-based evaluation tool for a case study for Central Florida. The goal of this set of experiments is to show how the proposed system can be used for decision-making and decision-support. The second set of experiments presents a series of numerical studies for a set of randomly generated instances.

The goal is to develop a simulation system that can allow one to evaluate performance of drone-based delivery systems, accounting for the uncertainties through simulations of real-life drone delivery flights. The proposed simulation model captures the variations in different system parameters, including interval of updating the system after receiving new information, demand parameters: the demand rate and their spatial distribution (i.e. their locations), service time parameters: travel times, setup and loading times, payload drop-off times and repair times and drone energy level: battery’s energy is impacted and requires battery change/recharging while flying.

Background: The annual average daily traffic (AADT) data from road segments are critical for roadway projects, especially with the decision-making processes about operations, travel demand, safety-performance evaluation, and maintenance. Regular updates help to determine traffic patterns for decision-making. Unfortunately, the luxury of having permanent recorders on all road segments, especially low-volume roads, is virtually impossible. Consequently, insufficient AADT information is acquired for planning and new developments. A growing number of statistical, mathematical, and machine-learning algorithms have helped estimate AADT data values accurately, to some extent, at both sampled and unsampled locations on low-volume roadways. In some cases, roads with no representative AADT data are resolved with information from roadways with similar traffic patterns.

Methods: This study adopted an integrative approach with a combined systematic literature review (SLR) and meta-analysis (MA) to identify and to evaluate the performance, the sources of error, and possible advantages and disadvantages of the techniques utilized most for estimating AADT data. As a result, an SLR of various peer-reviewed articles and reports was completed to answer four research questions.

Results: The study showed that the most frequent techniques utilized to estimate AADT data on low-volume roadways were regression, artificial neural-network techniques, travel-demand models, the traditional factor approach, and spatial interpolation techniques. These AADT data-estimating methods' performance was subjected to meta-analysis. Three studies were completed: R squared, root means square error, and mean absolute percentage error. The meta-analysis results indicated a mixed summary effect: 1. all studies were equal; 2. all studies were not comparable. However, the integrated qualitative and quantitative approach indicated that spatial-interpolation (Kriging) methods outperformed the others.

Conclusions: Spatial-interpolation methods may be selected over others to generate accurate AADT data by practitioners at all levels for decision making. Besides, the resulting cross-validation statistics give statistics like the other methods' performance measures.

Background: Democratic societies thrive when citizens actively and critically engage with new ideas, developments and claims to truth. Not only can such practices result in more effective choice-making, but they can also lead to widespread support for progressive beliefs, such as social justice. Yet with western societies in the midst of environmental, social and political crises, it seems more pertinent than ever that citizens become “ideas-informed”.

Methods: Drawing on a survey of 1,000 voting age citizens in England, this paper aims to provide insight into the following: (1) the current “state of the nation” in terms of whether, and how, individuals keep themselves up to date with regards to new ideas, developments and claims to truth; (2) the impact of staying up to date on beliefs such as social justice; (3) the factors influencing people’s propensity to stay up to date, their support for value-related statements, as well as the strength of these influencing factors; and (4) clues as to how the extant “state of the nation” might be improved.

Results: Our findings indicate that many people do keep up to date, do so in a variety of ways, and also engage with ideas as mature critical consumers. There is also strong importance attached by most respondents to the values one would hope to see in a progressive and scientifically literate society. Yet, as we illustrate with our structural equation model, there are a number of problematic network and educational related factors which affect: (1) whether and how people stay up to date; and (2) the importance people ascribe to certain social values, irrespective of whether they stay up to date or not.

Conclusions: Suggestions for the types of social intervention that might foster “ideas-informed” democracies (such as improved dialogue) are presented, along with future research in this area.

This study aims to reduce the redundant weight of the anti-roll torsion bar brought by the traditional empirical design and improving its strength and stiffness.

Based on the finite element approach coupled with the improved beluga whale optimization (IBWO) algorithm, a collaborative optimization method is suggested to optimize the design of the anti-roll torsion bar structure and weight. The dimensions and material properties of the torsion bar were defined as random variables, and the torsion bar's mass and strength were investigated using finite elements. Then, chaotic mapping and differential evolution (DE) operators are introduced to improve the beluga whale optimization (BWO) algorithm and run case studies.

The findings demonstrate that the IBWO has superior solution set distribution uniformity, convergence speed, solution correctness and stability than the BWO. The IBWO algorithm is used to optimize the anti-roll torsion bar design. The error between the optimization and finite element simulation results was less than 1%. The weight of the optimized anti-roll torsion bar was lessened by 4%, the maximum stress was reduced by 35% and the stiffness was increased by 1.9%.

The study provides a methodological reference for the simulation optimization process of the lateral anti-roll torsion bar.

The purpose of this study is to understand the profit implications of analytics-driven centralized discriminatory pricing at the headquarter level compared with sales force price delegation in the purchase of an aftermarket good through an indirect retail channel with symmetric information.

Using individual-level loan application and approval data from a North American financial institution and segment-level customer risk as the price discrimination criterion for the firm, the authors develop a three-stage model that accounts for the salesperson’s price decision within the limits of the latitude provided by the firm; the firm’s decision to approve or not approve a sales application; and the customer’s decision to accept or reject a sales offer conditional on the firm’s approval. Next, the authors compare the profitability of this sales force price delegation model to that of a segment-level centralized pricing model where agent incentives and consumer prices are simultaneously optimized using a quasi-Newton nonlinear optimization algorithm (i.e. Broyden–Fletcher–Goldfarb–Shanno algorithm).

The results suggest that implementation of analytics-driven centralized discriminatory pricing and optimal sales force incentives leads to double-digit lifts in firm profits. Moreover, the authors find that the high-risk customer segment is less price-sensitive and firms, upon leveraging this segment’s willingness to pay, not only improve their bottom-line but also allow these marginalized customers with traditionally low approval rates access to loans. This points out the important customer welfare implications of the findings.

Substantively, to the best of the authors’ knowledge, this paper is the first to empirically investigate the profitability of analytics-driven segment-level (i.e. discriminatory) centralized pricing compared with sales force price delegation in indirect retail channels (i.e. where agents are external to the firm and have access to competitor products), taking into account the decisions of the three key stakeholders of the process, namely, the consumer, the salesperson and the firm and simultaneously optimizing sales commission and centralized consumer price.

This study aims to deal with the paucity of studies in the stages of the development of loyalty behaviour of customers in the healthcare context by incorporating three crucial service quality dimensions (physical environment, personnel quality and technical quality) and also investigating trust and commitment as mediating factors.

Survey data were obtained from 420 respondents admitted to government hospitals in Kerala employing a convenience sampling method. The formulated hypotheses were tested using partial least square structural equation modelling.

Results indicate that patient satisfaction, trust and commitment can create favourable behavioural intentions amongst patients. When patients reveal higher trust, they are more inclined to value healthcare services and willing to commit to a long-term relationship, resulting in increased patient loyalty.

Organisational efforts should improve trust and commitment and build a good relationship between service providers and patients. Efforts should be taken to raise the standard of technical and personnel aspects, and a focus on physical infrastructure should also be considered to build a favourable behavioural intention to revisit and positive referrals.

This is the first empirical study to analyse technical quality, personnel quality and physical environment along with the mediating effect of trust, and commitment in a four-stage loyalty development model in the healthcare context of Kerala, India.