Search results

Gourd fibres (GF) are a natural biodegradable fibre material with excellent mechanical properties and high tensile strength. The use of natural fibres in composite materials has gained popularity in recent years due to their various advantages, including renewability, low cost, low density and biodegradability. Gourd fibre is one such natural fibre that has been identified as a potential reinforcement material for composites. However, it has low surface energy and hydrophobic nature, which makes it difficult to bond with matrix materials such as polyester. To overcome this problem, chemically adapted gourd fibre has been proposed as a solution. Chemical treatment is one of the most widely used methods to improve the properties of natural fibres. This research evaluates the feasibility and effectiveness of incorporating chemically adapted gourd fibre into polyester composites for industrial fabrication. The purpose of this study is to examine the application of chemically modified GF in the production of polyester composite engineering materials.

This work aims to evaluate the effectiveness of chemically adapted gourd fibre in improving the adhesion of gourd fibre with polyester resin in composite fabrication by varying the GF from 5 to 20 wt.%. The study involves the preparation of chemically treated gourd fibre through surface modification using sodium hydroxide (NaOH), permanganate (KMnO₄) and acetic acid (CH₃COOH) coupling agents. The mechanical properties of the modified fibre and composites were investigated. It was then characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) to determine the changes in surface morphology and functional groups.

FTIR characterization showed that NaOH treatment caused cellulose depolymerization and caused a significant increase in the hydroxyl and carboxyl groups, showing improved surface functional groups; KMnO₄ treatment oxidized the fibre surface and caused the formation of surface oxide groups; and acetic acid treatment induced changes that primarily affected the ester and hydroxyl groups. SEM study showed that NaOH treatment changed the surface morphology of the gourd fibre, introduced voids and reduced hydrophilic tendencies. The tensile strength of the modified gourd fibres increased progressively as the concentration of the modification chemicals increased compared to the untreated fibres.

This work presents the designed composite with density, mechanical properties and microstructure, showing remarkable improvements in the engineering properties. An 181.5% improvement in tensile strength and a 56.63% increase in flexural strength were got over that of the unreinforced polyester. The findings from this work will contribute to the understanding of the potential of chemically adapted gourd fibre as a reinforcement material for composites and provide insights into the development of sustainable composite materials.

This study aims to understand the sustainable development of small and medium-sized enterprises (SMEs), analysing their current practices in the social, environmental and economic domain.

To fulfil this objective, an exploratory, qualitative approach was adopted, using the multiple case study methodology and focusing on eight cases (SMEs) in Portugal. Data were collected through interviews, since this technique allows proximity and interaction with decision makers and those responsible for firms’ sustainability.

From content analysis of the interviews held, the results show that SMEs are aware of and committed to sustainability and that the external context and some of its particularities have a significant impact on their sustainable development. These SMEs undertake various practices of a social, environmental and economic nature, highlighting especially environmental ones such as efficient resource consumption, using more sustainable resources, recycling waste and waste management.

This study contributes greater knowledge of the phenomenon of SMEs’ sustainable development and identifies practical examples that could increase this firm segment’s awareness of the importance of sustainable practices associated with developing their business.

In this study, new and innovative sustainability practices are presented in the SMEs. The authors can underline that this study contributes to reinforcing the theory about the topic investigated by adding knowledge about sustainable development in the SME context. It deepens knowledge in this scientific area, which can be spread in the scientific community and among SMEs.

This paper aims to explore the intellectual structure shaping the circular economy (CE) discourse within the built environment in Africa.

The study adopted a bibliometric analysis approach to explore the intellectual structure of CE in the built environment in Africa. The authors collected 31 papers published between 2005 and 2021 from the Scopus database and used VOSviewer for data analysis.

The findings show that there are six clusters shaping the intellectual structure: demolition, material recovery and reuse; waste as a resource; cellulose and agro-based materials; resilience and low-carbon footprint; recycling materials; and the fourth industrial revolution. The two most cited scholars had three publications each, while the top journal was Resources, Conservation and Recycling. The dominant concepts included CE, sustainability, alternative materials, waste management, lifecycle, demolition and climate change. The study concludes that there is low CE research output in Africa, which implies that the concept is either novel or facing resistance.

The data were drawn from one database, Scopus; hence, adoption of alternative databases such as Web of Science, Google Scholar and Dimensions could potentially have yielded a higher number of articles for analysis which potentially would result in different conclusions on the subject understudy.

This study made a significant contribution by articulating the CE intellectual structure in the built environment, identified prominent scholars and academic platforms responsible for promoting circularity in Africa.

The increasing accumulation of synthetic plastic waste in oceans and landfills, along with the depletion of non-renewable fossil-based resources, has sparked environmental concerns and prompted the search for environmentally friendly alternatives. Biodegradable plastics derived from lignocellulosic materials are emerging as substitutes for synthetic plastics, offering significant potential to reduce landfill stress and minimise environmental impacts. This study highlights a sustainable and cost-effective solution by utilising agricultural residues and invasive plant materials as carbon substrates for the production of biopolymers, particularly polyhydroxybutyrate (PHB), through microbiological processes. Locally sourced residual materials were preferred to reduce transportation costs and ensure accessibility. The selection of suitable residue streams was based on various criteria, including strength properties, cellulose content, low ash and lignin content, affordability, non-toxicity, biocompatibility, shelf-life, mechanical and physical properties, short maturation period, antibacterial properties and compatibility with global food security. Life cycle assessments confirm that PHB dramatically lowers CO₂ emissions compared to traditional plastics, while the growing use of lignocellulosic biomass in biopolymeric applications offers renewable and readily available resources. Governments worldwide are increasingly inclined to develop comprehensive bioeconomy policies and specialised bioplastics initiatives, driven by customer acceptability and the rising demand for environmentally friendly solutions. The implications of climate change, price volatility in fossil materials, and the imperative to reduce dependence on fossil resources further contribute to the desirability of biopolymers. The study involves fermentation, turbidity measurements, extraction and purification of PHB, and the manufacturing and testing of composite biopolymers using various physical, mechanical and chemical tests.

The present work highlights the outstanding properties of Cannabis sativa that can be harnessed for various utilitarian functions and its climate friendly properties.

In this paper, the authors reviewed current research on all possible utilities from household work to manufacturing of various products that are environmentally sustainable. The authors have presented some of their research on this materials and also exploration of hemp as an archaeological material based on the findings from wall paintings of Ellora caves.

There are references of hemp use in mixing with earthen/lime plaster of western Indian monuments. Around 1,500 years of Ellora’s earthen plaster, despite harsh climatic conditions, survived due to the presence of hemp in the plaster that adds durability, fibrosity and its capacity to ward off insects and control humidity. Furthermore, the outstanding quality of Cannabis as carbon sequestrant was harnessed by Indians of ancient times in Ellora mural paintings.

This work discusses some relevant literature on the potential use of hempcrete aligned with Agenda 2030 of sustainable development goals.

There are several research going on in producing sustainable materials using hemp that have the least environmental impact and can provide eco-friendly solutions.

The authors impress upon the readers about multifarious utility of the hemp and advices for exploration of this material to address many environmental issues.

This paper presents both review of the existing papers and some components coming directly from their laboratory investigations.

This paper aims to investigate the current state of biocomposites used in fused deposition modelling (FDM) with a focus on their mechanical characteristics.

The study presents a variety of biocomposite materials that have been used in filaments for 3D printing by different researchers. The process of making filaments is then described, followed by a discussion of the process parameters associated with the FDM.

To achieve better mechanical properties of 3D-printed parts, it is essential to optimize the process parameters of FDM while considering the characteristics of the biocomposite material. Polylactic acid is considered the most promising matrix material due to its biodegradability and lower cost. Moreover, the use of natural fibres like hemp, flax and sugarcane bagasse as reinforcement to the polymer in FDM filaments improves the mechanical performance of printed parts.

The paper discusses the influence of critical process parameters of FDM like raster angle, layer thickness, infill density, infill pattern and extruder temperature on the mechanical properties of 3D-printed biocomposite.

Develop biodegradable meshes as a novel solution to address issues associated with using synthetic meshes for POP repair.

Computational models were created with variations in the pore geometry, pore size, filament thickness, and inclusion of filaments around specific mesh regions. Subsequently, one of the meshes was 3D printed to validate the results obtained from the simulations. Following this, a uniaxial tensile test was carried out on the vaginal tissue of a sow to compare with the simulations, to identify meshes that displayed behaviour akin to vaginal tissue. Finally, the most promising outcomes were compared with those of the uterosacral ligament and a commercially available mesh.

Following a comprehensive analysis of the results, the mesh that most accurately replicates the behaviour of the vaginal tissue showcases a smaller pore diameter (1.50 mm), filaments in specific areas of the mesh, and variable filament thickness across the mesh. Nevertheless, upon comparing the outcomes with those of the uterosacral, the meshes do not exhibit similar behaviour to the ligament. Finally, the commercially available mesh does not represent the behaviour of both the vaginal tissue and the uterosacral ligament and in this sense may not be the best treatment option for POP repair.

Their biocompatibility and biomechanical properties make them a potential solution to the disadvantages of synthetic meshes. Personalized/customized meshes could be part of the future of surgical POP repair.

The consideration of alternative sources of material for construction is imperative to reduce the environmental impacts as two-fifths of the carbon footprint of materials is attributed to the construction industry. One alternative material with improved biodegradable attributes which can contribute to carbon offset is bamboo. The commercialisation of bamboo in modern infrastructures has significant potential to address few of the Sustainable Development Goals (SDGs) itemised by the United Nations, namely SDG 9 about industry, innovation and infrastructure. Other SDGs covering sustainable cities and communities, responsible consumption and production and climate action are also indirectly addressed when utilising sustainable construction materials. Being a natural material however, the full commercialisation of materials such as bamboo is constrained by a lack of durability. Besides fracture mechanisms arising from load-induced cracks and thermal modification, the durability of bamboo material is greatly impaired by biotic and abiotic factors, which equally affect its natural rate of degradation, hence fracture behaviour. In first instance, this chapter outlines the various factors leading to the durability limitations in bamboo material due to load-induced cracks and natural degradation based on recent findings in this field from the author's own work and from past literature. Secondly, part of this chapter is devoted to a new approach of processing the surge of information about the varied aspects of bamboo durability by considering the powerful technique of artificial intelligence (AI), specifically the artificial neural network (ANN) for prediction modelling. Further use of AI-enabled technologies could have an impactful outcome on the life cycle assessment of bamboo-based structures to address the growing challenges outlined by the United Nations.

This study aims to investigate the mechanical, thermal and water absorption (WA) properties of kenaf fiber (KF) composites hybridized with powdered Acacia concinna pods (ACP).

Kenaf fiber reinforced epoxy polymer hybrid composite was fabricated using several weight percentages of ACP powder as filler (0%, 2%, 4%, 6% and 8%), both with and without chemically altering the fiber mat. 6 Wt.% NaOH was used in distilled water to treat KF mat chemically. The hand layup technique is used to produce ASTM-compliant KF hybrid laminates. Tensile, flexural and IZOD impact strengths were tested on the generated hybrid composites and their thermal and WA characteristics. Scanning electron microscope fractography revealed that fiber pulling-out, debonding and cracking were the main ways composites fractured.

The investigation findings reveal that the tensile, flexural and impact strengths increased when ACP fillers were added up to 4, 6 and 8 Wt.%, respectively. Thermogravimetric analysis indicates that the hybrid composite is thermally stable up to 215°C. WA experiments reveal that KF mat composites treated with 0 Wt.% ACP filler had less WA than those not treated with ACP filler. The treated KF with 4% filler hybrid composite demonstrated improved interfacial bonding between the reinforcement and matrix compared to other combinations.

Although filler made of A. concinna is inexpensive, lightweight, renewable, totally or partially recyclable and biodegradable, its potential application in hybridizing composites is yet to be investigated. Hybridizing the KF mat with ACP filler in an epoxy matrix produced novel hybrid composites. Evaluations have been conducted on the effects of ACP filler on the mechanical, thermal and WA characteristics of composites.

The application of indigo dyes in the denim industries has been criticised due to the introduction of non-renewable oxidation products into the environment. Previous studies have investigated that reducing sugars can be used as green alternatives to sodium dithionite in the indigo dyeing of cotton fabric owing to their reduced and stable redox potential in the dye bath. The purpose of this study was to dye denim cotton fabric with indigo dye using various reducing sugars and alkalis. The use of sucrose and potassium hydroxide (KOH) for indigo dyeing has been explored for the first time.

A mixed factorial design with four variables including alkali, pH, number of dips and type of reducing sugar at different levels was studied to identify a significant correlation between the effect of these variables on the colour strength and fastness properties of the dyeings.

Investigations were made to examine the significant factors and interactions of the selected responses in the eco-friendly dyeing method. This process has the potential to reduce the load of sulphite and sulphate generated in the dyebath due to the use of a conventional reducing agent, sodium dithionite. The colour strength of the dyeing reduced with fructose was found to be better than other reducing sugars and significantly influenced by the number of dips, pH levels and the interaction between pH and reducing sugars. Using fructose for indigo dyeing with two dips at a pH of 11.5, using KOH as an alkali, results in higher colour strength values. The fastness properties of the indigo-dyed sample with reducing sugars ranging from fair to good or good to excellent. Specifically, colour change receives a rating of grey scale 3–4, staining 4–5, dry rubbing 4 and light fastness 3–4. These assessments hold true across various factors such as the type of reducing sugar, alkali, pH and the number of dips. The optimised parameters leading to improved colour strength and fastness properties are also discussed.

This dyeing technique is novel and a green alternative to dithionite denim dyeing. This process is found to be useful for indigo dyeing of denim fabric leading to reduced and stable redox potential in the dyebath and acceptable colour strength of the dyed fabric.