Search results

The purpose of the research was to, first, investigate if the use of maps as instructional resources will boost scholarly performance and, second, examine if gender can moderate the effect of map usage on scholarly performance.

The study was a quasi-experimental pre-test and post-test. A sample of 260 JSS II Students from 8 schools were selected through the purposive sampling technique. A Social Studies Scholarly Performance Test (SSSPT) with a reliability index of 0.79 was the instrument for data collection. The students were assigned into two groups: control and experimental. Both groups were pre-tested taught for a timeline of six weeks and thereafter post-tested.

The study reported a significant increase in the scholarly performance of students taught with maps; a significant difference occurred in the scholarly performance of both groups and gender did not moderate the effect of maps.

The social studies teachers used for the study did not have previous knowledge or map skills; this could have affected the outcome. Secondly, the treatment took place for just six weeks, and the time allotted for social studies in the school timetable was used. This may not have given the students enough time to master map interpretation.

A major implication of the study is that results will show that maps can promote the scholarly performance of students in social studies. Secondly, the fact that gender did not moderate the effect of maps suggests that maps are gender-friendly.

The results of the study, if implemented, would make social studies teachers to become inventive and resourceful in the use of maps as instructional resources for junior secondary students' scholarly performance in social studies without taking gender into consideration.

This study is a product of the researcher’s doctoral thesis; therefore, it is original and has value. The results are the product of a painstaking study carried out by the author for a period of three years on the effect of instructional resources on social studies students’ scholarly performance. Maps were one of the instructional resources studied for the award of a Ph.D. degree.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

In the literature, evidence is to be found of the positive effect of high-performance work systems (HPWSs) on innovation in firms. However, innovation is enabled by not only human resources but also digital technology, and scholars have called for further investigation into the interplay between digital technology and HRM systems. Drawing on signalling theory and HPWSs research, the purpose of this study is to explore the moderating role of digital technologies in the relationship between HPWSs and innovation in the firm and consider employee participation as an additional conditioning factor.

This study uses data from the European Company Suvery 2019 administered in a sample of more than 20,000 European establishments and applies logistic regression with a three-way interaction.

HPWSs underpin product and process innovation. Moreover, this study shows that in firms with low levels of employee participation, digital technology enhances the effect of HPWSs on innovation, while in firms with high levels of employee participation, this effect is reduced.

This study enriches the scholarly discussion about the link between HPWSs and innovation in the firm, by investigating in theoretical and empirical terms the moderating effect of digital technology, underlining that either positive or negative synergistic effects are possible. By adding employee participation to the analysis, the authors cast light on an important boundary condition for understanding when the synergic effects become more prominent. This intends to respond to recent calls from scholars and practitioners for more insight into the precise nature of the synergies between HPWSs and digital technology on innovation in the firm, with important implications for management.

Entrepreneurs prioritise and act on purposeful endeavours instigated to actions by the visions of profits and benefits in the perceived opportunities. In the state of maximum entropy, with disorderliness and disequilibrium, entrepreneurs select the preferred pathway, through the profit-sensing mechanism, with the best probability of success to bet on. Therefore, this paper unpacks the forces at work in the mechanism to explain how entrepreneurs respond to opportunity and interpret the signals to coalesce into organised actions.

This research is primarily a conceptual paper on entrepreneurial action and the mechanism leading to that action. It refers to thermodynamic principles and biological cases to explain the forces at work using mostly analogical comparisons and similarities.

This paper aims to present an alternative theoretical scaffolding for entrepreneurship researchers to explore non-rational entrepreneurial behaviours and actions in uncertain, unstable and non-equilibrium environments, thereby creating new and competing hypotheses under the backdrop of adaptive evolution and thermodynamics phenomena.

The discussion featuring instinctively and naturally forming responses cannot fully explain the real entrepreneurial action as there is an element of free will and choices that are not discussed. While strategic choice and free-will shape decisions, they are preceded first by the attraction of the gradients and the biased motion in the direction of profit-attractant.

There remain essential links and issues not addressed in this “natural science”, constituting life science and physical science, oriented entrepreneurship research and exploration. Conceptualising opportunity-as-artefact and entrepreneurship as design, significant incidences of entrepreneurial actions can be explained by the presence of gradients stimulating entrepreneurial actions.

This viewpoint of information causality in opportunity-as-artefact casts a new look at the venerable question of what causes entrepreneurial actions. Shane and Venkataraman brought into focus this conversation, initiating the conceptual definition of opportunity. To have entrepreneurship, entrepreneurial opportunities must come first. Figuring the signals arising from these opportunities and cueing entrepreneurs to action is the main focus of this study.

Considering the “mechanism” at work and the thermodynamical forces at play, the entrepreneurial design process appears to hold considerable promise for future research development.

Particles bed binding by selective cement activation (SCA) method is a computer-aided manufacturing (CAM) technique used to produce cementitious elements. A computer-aided design file is sliced to generate G-codes before printing. This paper aims to study the effect of key input parameters for slicer software on the final properties of printed products.

The one factor at a time (OFAT) methodology is used to investigate the impact of selected parameters on the final properties of printed specimens, and the causes for the variations in outcomes of each variable are discussed.

Finer aggregates can generate a more compact layer, resulting in a denser product with higher strength. Fluid pressure is directly determined by voxel rate (r_V); however, high pressures enable better fluid penetration control for fortified products; for extreme r_Vs, residual voids in the interfaces between successive layers and single-line primitives impair mechanical strength. It was understood that printhead movement along the orientation of the parts in the powder bed improved the mechanical properties.

The design of experiment (DOE) method assesses the influence of process parameters on various input printing variables at the same time. As the resources are limited, a fractional factorial plan is carried out on a subset of a full factorial design; hence, providing physical interpretation behind changes in each factor is difficult. OFAT aids in analyzing the effect of a change in one factor on output while all other parameters are kept constant. The results assist engineers in properly considering the influence of variable variations for future DOE designs.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

The aim was not to perform a systematic review but firstly to search in PubMed, Science Direct, Scopus and Web of Science databases on the papers published in the last five years using tools for reviewing the statement of preferred information item for systematic reviews without focusing on a randomized analysis and secondly to perform a bibliometric analysis on the properties of films and coatings added of tocopherol for food packaging.

On January 24, 2022, information was sought on the properties of films and coatings added of tocopherol for use as food packaging published in PubMed, Science Direct, Scopus and Web of Science databases. Further analysis was performed using bibliometric indicators with the VOSviewer tool.

The searches returned 33 studies concerning the properties of films and coatings added of tocopherol for food packaging, which were analyzed together for a better understanding of the results. Data analysis using the VOSviewer tool allowed a better visualization and exploration of these words and the development of maps that showed the main links between the publications.

In the area of food science and technology, the development of polymers capable of promoting the extension of the shelf life of food products is sought, so the knowledge of the properties is vital for this research area since combining a biodegradable polymeric material with a natural antioxidant active is of great interest for modern society since they associate environmental preservation with food preservation.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

Stock market has always been lucrative for various investors. But, because of its speculative nature, it is difficult to predict the price movement. Investors have been using both fundamental and technical analysis to predict the prices. Fundamental analysis helps to study structured data of the company. Technical analysis helps to study price trends, and with the increasing and easy availability of unstructured data have made it important to study the market sentiment. Market sentiment has a major impact on the prices in short run. Hence, the purpose is to understand the market sentiment timely and effectively.

The research includes text mining and then creating various models for classification. The accuracy of these models is checked using confusion matrix.

Out of the six machine learning techniques used to create the classification model, kernel support vector machine gave the highest accuracy of 68%. This model can be now used to analyse the tweets, news and various other unstructured data to predict the price movement.

This study will help investors classify a news or a tweet into “positive”, “negative” or “neutral” quickly and determine the stock price trends.