Advanced
search

To read this content please select one of the options below:

Estimation of tool wear according to cutting forces during machining procedure

Obrad Anicic (Faculty of Technical Sciences, University of Priština, Kosovska Mitrovica, Serbia)
Srdjan Jovic (Faculty of Technical Sciences, University of Priština, Kosovska Mitrovica, Serbia)
Nenad Stanojevic (High Technical School of Professional Studies, Urosevac, Serbia)
Mladen Marsenic (Faculty of Technical Sciences, University of Priština, Kosovska Mitrovica, Serbia)
Branko Pejovic (Faculty of Technical Sciences, University of Priština, Kosovska Mitrovica, Serbia)
Bogdan Nedic (Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia)

Sensor Review

ISSN: 0260-2288

Article publication date: 8 February 2018

Issue publication date: 6 March 2018

238

Abstract

Purpose

The main purpose of the study was to analyze the relationship between cutting forces and tool wear during turning of steel 30CrNiMo8.

Design/methodology/approach

It is very important to find the optimal machining conditions to increase the tool life and to improve product quality. Width of tool wear was measured by universal microscope.

Findings

During experimental procedure, one chip shape was obtained for the given machining parameters. Results showed negligible tool wear for the given experimental conditions. In other words, the tool wear is negligible for one chip shape.

Originality/value

To increase tool wear, there are different chip shapes.

Keywords

Citation

Anicic, O., Jovic, S., Stanojevic, N., Marsenic, M., Pejovic, B. and Nedic, B. (2018), "Estimation of tool wear according to cutting forces during machining procedure", Sensor Review, Vol. 38 No. 2, pp. 176-180. https://doi.org/10.1108/SR-07-2017-0147

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles

Manage cookies

We’re listening — tell us what you think

Join us on our journey